Camille Bauer SIRAX BT5700 Manual - page 20
PM 1000284 000 01
Device handbook SIRAX BT5700
20/31
This screen allows user to set the baud rate for Rs485 communication.
Pressing “UP” key sets the present value and advances to Parity and stop bits
menu (Section 7.2.11).
Pressing “DOWN” key enters into Baud rate Edit mode & scrolls The values
from 2400, 4800, 9600 to 19200 & Back to 2400.
Pressing ‘UP’ key will advance to baud rate Confi rmation screen.
This menu allows user to set parity and number of stop bits for Rs485 communication
interface.
The parity and number of stop bits are to be set in same menu.
Pressing “UP” key sets the displayed combination of Parity and stop bits and advances
the operation to Energy rate selection menu (section 7.2.12).
Pressing “DOWN” key enters into edit mode and scrolls the Combination from Parity:
None Stop bit:1, Parity: None Stop bit: 2
Parity: Even Stop bit: 1, Parity: Odd Stop bit:1 and back to Parity: None Stop bit: 1. Af-
ter selecting the desired combination, pressing “UP” Key enters into parity and number
of stop bit confi rmation screen.
Parity and number of stop bit confi rmation.
Pressing “DOWN” keys re-enters into baud rate edit mode.
Pressing “UP” key sets the displayed value as baud rate and advances the
operation to parity and stop bit menu (section 7.2.11).
Pressing “DOWN” key re-enters into the Parity and stop bit Edit menu.
Pressing “UP” key, sets the displayed values and advances the operation to Energy rate
selection menu. (section 7.2.12).
This menu allows user to set the energy reading Update rate from 1 to 60 minutes.
Pressing “DOWN” key enters into energy rate edit menu and scrolls the value of 10s digit
from 0 to 6. If 1st digit is greater than 0 then 10s digit will wrap back to 0 from 5.
* denotes that the digit will be fl ashing.
Pressing “UP” key shifts the curser position from 10s digit to 1s digit. Value of 1st digit
scrolls from 0 to 9 and again Wraps back to 0.
After setting desired value of 1s digit pressing “UP” key Enters into energy rate confi rma-
tion screen.
Baud rate Confi rmation
Parity and number of stop bit confi rmation
7.2.10 Baud Rate
7.2.12 Energy rate
7.2.11 Parity and Stop bits
Baud Rate : 4800
EdiT
Baud Rate : 9600
SET OK
Parity: NONE
StopBit : 2
Parity: Even
StopBit : 1
Energy Rate : 00*1
EdiT