CAMOAT RoadSafe1 Manual - page 5
Viewing Videos and Photos
The RS1 has a 2.7” TFT screen to calibrate the cameras viewing angle as well as playing
back video with sound or viewing pictures. The screen allows the user to be able to
change settings without having to plug the RS1 to a computer. There are 3 modes:
Video, Photo, and Video/Photo playback. Press the Mode button when the RS1 is not
recording to allow the user to select between modes.
1.
To stop the RS1 from recording, press the OK button.
2.
Press the MODE button until the Video/Photo Playback selection appears.
3.
Select between the videos and photos by using the UP and DOWN buttons.
4.
Play and pause a video using the OK button, and to exit the video, press the MODE
button.
VIDEO SETTINGS / DEVICE SETTINGS
Enter the Video Settings by pressing the MENU button while the RS1 is idle and not
recording. Enter Device Settings by quickly pressing the MENU button again. Below is a
list of settings and options.
** Important - Saving Settings
To save settings, after the desired settings are selected, press the POWER button
to turn the device off and save your most recent settings.
1
VIDEO SETTINGS
Resolution:
Set the resolution/quality of recording videos, available options are
1080FHD, 720HD.
Loop Recording:
Select 1, 2 or 3 minute loop clips, or select OFF for one continuous
file. When the memory card fills up with clips, the oldest files are overwritten. If Loop
Recording is set to OFF, the RS1 records until the microSD card is filled, and then stops