C150 chipper shredder operating instructions before commissioning the machine, read operating instructions and observe warning and safety instructions..
Camon chipper shredder page 2 c150/0415 contents page 3 safety page 4 before starting work to start engine page 5 shredder operation page 6 to clear the discharge grille page 7 points to observe page 8 maintenance programme page 9 risk assessment page 10 shredder blade layout page 11 machine overvie...
Camon chipper shredder c150/0415 page 3 safety always start the engine in the open air do not smoke when refuelling do not mix oil with the fuel always stop the engine before making any adjustments, refuelling, moving or cleaning, or when the unit is unattended use only fuel from containers designed...
Camon chipper shredder page 4 c150/0415 to start engine ensure the machine is on firm, level ground. Do not use machine on a slope. The unit may be placed on a tarpaulin to collect the processed material. Ensure the shredder hopper and chipping chute are in place. Using the dipstick provided, check ...
Camon chipper shredder c150/0415 page 5 ensure the discharge grille is in the closed position. Increase engine to full throttle and allow the machine to build up to full speed. Be very careful what you put into the hopper. The shredder cannot handle the following: • cloth • string • plastics • glass...
Camon chipper shredder page 6 c150/0415 to clear the discharge grille switch off the engine and visually check the shredder shaft has stopped rotating. Disconnect the spark plug lead. Move discharge grille lever from fully closed to fully open position. Clear out the material with a wooden handle or...
Camon chipper shredder c150/0415 page 7 danger points to observe the chipper shredder blades may continue to rotate silently after engine shut down. Be sure the blades have stopped rotating before working on the machine. The shredder grasps and pulls material down into the hopper with surprising spe...
Camon chipper shredder page 8 c150/0415 maintenance programme operation every day every week every month engine check engine oil level 10w/40 see separate engine manual x x machine check chipping blade condition x check fixed blade condition x check shredder blades condition x check belt tension x g...
Camon chipper shredder c150/0415 page 9 risk assessment hazards risk level action needed general the machine should only be used by trained operators. Flying chippings medium wear protective clothing including helment, eye and ear protection, loose fitting gloves, and overalls. Ensure there are no b...
Camon chipper shredder page 10 c150/0415 shredder blade layout ref description part no qty a 3mm spacer 010107000 8 b 11.5mm spacer 081007080 20 c 18mm spacer 010108001 12 d 6mm hammer 010105006 36.
Camon chipper shredder c150/0415 page 11 machine overview grille opening lever discharge grille lever locking knob shredder infeed chute/hopper chipper infeed chute/hopper choke lever recoil starter handle fuel tap oil level plug ignition switch fuel filler cap open closed throttle lever.
Camon chipper shredder page 12 c150/0415 " machine engine rpm sound level db(a) camon c80 chipper shredder 3100 up to 104.0 sound levels.
Camon chipper shredder c150/0415 page 13 to validate your warranty please complete the form below and return it to: tracmaster ltd, sovereign centre, victoria road, burgess hill, rh15 9lr alternatively visit www.Tracmaster.Co.Uk and complete the online form. Customer details name: .....................
Camon chipper shredder page 14 c150/0415.
Camon chipper shredder c150/0415 page 15.
C80/0415 © tracmaster ltd 2015. Specifications are subject to change without prior notice. Tracmaster ltd, sovereign centre, victoria road, burgess hill rh15 9lr t: +44 (0) 1444 247689 f: +44 (0) 1444 871612 w: www.Tracmaster.Co.Uk e: info@tracmaster.Co.Uk.