Camon TC07 Operating Instructions Manual - page 13
Tracmaster Ltd
CAMON TC07 Turf Cutter
_______________________________________________________________________________________________
For parts diagrams visit
www.tracmaster.co.uk
9
5.2 To Stop the Engine
Release the drive lever.
Switch the engine ON/OFF switch to the ‘O’ off position.
Turn the fuel tap lever to the OFF position.
WARNING: THE EXHAUST COVER MAY BE HOT – DO NOT TOUCH.
5.3 Safety Equipment
The TC07 operator must be wearing:
• Ear Defenders
• Gloves
• Protective Footwear
• Safety Glasses
5.4 Operation
Before turf cutting can be carried out, the grass must be cut short and be cleared of any
objects such as stones or sticks that would damage the Turf Cutter.
WARNING: USING THE TURF CUTTER ON LONG GRASS WILL QUICKLY CAUSE
DAMAGE TO COMPONENTS OF THE MACHINE. WE RECOMMEND GRASS IS CUT
PRIOR TO USING THE TURF CUTTER.
Do not operate the Turf Cutter on wet lawns or in wet weather.
Do not operate the machine in very hard dry ground.
When safety checks have been completed, start the engine following the correct
procedure.
Position the Turf Cutter in the direction you wish to cut turf.
Set the thickness of turf required by using the height adjustment knob.
Ensure the gear lever is in the ‘O’ position.
Lift the drive lever on the handlebar to engage the drive to the blade.
Lower the lifting lever to lower the blade into the ground.
Move the gear lever from the ‘O’ position to the ‘I’ position.
At the end of the strip of turf, raise the lifting lever to raise the blade out of the ground.
Release the drive lever stopping the drive to the wheels and the blade.