CamOne Xplore Manual - Setup Menu
7
SETUP Menu
Please press the M- Button for 3 seconds until you will enter the setup.
Languages
Choose between German, English, French, Spanish or Italian.
Date
Setting the date (Year-Month-Day)
Time
Setting the time (Hour : Minute)
Timestamp
If the timestamp is activated, you will see the date and time embedded
in the video
Recording time
Choose between: Normal, 5/15/30 or 60 min
Video Quality
Choose between: low, normal and high
Serial Picture
Normal, 1 frame per second (FPS), 6 FPM, 2 FPM or 1 FPM
Motion
Set the lighting conditions
Flip/Mirror
Normal / Flipped or mirrored picture
Auto Power Off
Select the Auto off function: Off, 60 Sec., 120 Sec. or 300 Sec.
Auto Screen Off
Battery saving to be selected here:
Off, 30 Sec., 60 Sec. or 120 Sec.
Press any button to reactivate!
Light Frequency
50/60Hz - Before you start recording indoor, choose the correct
frequency:
Europe, Asia and Australia: 50Hz
America: 60Hz
Japan: Depending on the area 50 or 60Hz
Card formatting
All recorded data will be deleted!
Reset Resetting
the
camera
Update
Information about current firmware and update
Please note that some functions are only available after a firmware-/ software update.
Foto / Video Record
After activating the camera you can directly
start the recording by pressing the “record
button“ (Photo-/ or Video recording). By
pressing this button again the recording stops
and will be saved.
Never remove the card or battery during
the data saving (shown by a rotating circle
in the display).