Instruction manual cwm-500 5” waterproof monitor thank you for purchasing this product. For proper usages and application, please read this instruction manual thoroughly. Printed in korea ver. 1.0 * design and specifications are subject to change without notice..
2 contents safeguard instructions feature box contents function of each part function setting installation and connection specification ....................................... 3 ............................................................................. 5 .............................................
3 5” waterproof monitor safeguard instructions please read the “safety rules” carefully before using this product. Following the safety rules pre- vents users from damages related with the misuse of the product. It is very important to follow these safety rules. We state “caution” and “warning” to c...
4 warning do not put the product in place where sudden temperature increasing and should use on optimum voltage, temperature and humidity. - it may cause to electronic shock or malfunction. Do not place near of air bag effective range. - it may cause malfunction of air bag or accident, injury due to...
1 2 * design and specifications are subject to change without notice. Stand(cl-5) u-bracket (optional) trg extension cable(x3) accessory pack 5 5” waterproof monitor 5” waterproof monitor • water resistant (ip-67), aluminum housing • application of tft lcd with high resolution and low reflection • a...
3 1. Lcd screen 2. Stand by led 3. Buttons 4. Sun visor hole 5. Speaker hole 6. Stand bracket qvga (320x234) stand by lamp dimmer, left, right, mode, menu, power sun visor installation hole speaker hole (waterproof) stand fix bracket 6 5” waterproof monitor function of each part.
4 cam1 cam2 cam3 dimmer dimmer 7 5” waterproof monitor functions power on / off 1 1. Press power button for power on. (stand-by led is off) 2. Press power button again for power off. (stand-by led is on) mode 2 1. Press mode button. 2. Cam1 - cam2 - cam3 - cam1 appears on the screen. 3. It is disapp...
8 screen switch while trigger input 5 what is or ? We call it when a circuit works by a signal for example if driver uses right/left turn signal or reverse gear, the monitor shows connected camera screen on driving mode. 1) if there is trigger signal input, the connected screen (trigger input screen...
5 dimmer language direction reset english 0˚ contrast brightness color tint 70 40 40 40 cam1 normal dimmer language direction reset english 0˚ dimmer language direction reset english 0˚ dimmer language direction reset english 0˚ dimmer language direction reset english 180˚ 2. Use mode button to sele...
10 picture camera contrast brightness color tint 70 40 40 40 cam1 normal cam1 mirror connected camera normal / mirror selecting function in cam2(or cam3) mode, cam2(or cam3) normal/mirror is adjusted. 1. Use mode button to select contrast, brightness, color, tint menu. (selected menu is in red.) 2. ...
6 double side adhesive tape double side adhesive tape double side adhesive tape double side adhesive tape screw hole sun visor should be installed with 4 screws. 11 installation 5” waterproof monitor installation and connection.
12 ca mer a 1 (left ) ca mer a 2 (right ) ca mer a 3 (rear) dc 12v ~ 24v green (st and b y1 / left ) or ange (st and b y2 / right ) bla ck (st and b y3 / rear) ca mer a( option) cigar c able connec tion.
7 5” waterproof monitor specification 5 inch qvga (320x234) 400cd/m² 400:1 70˚ / 70˚ / 40˚ / 60˚ dc 12v ~ 24v 450ma (dc 12v, monitor set only) ntsc / pal h : 15.734 khz / v : 60 hz h : 15.625 khz / v : 50 hz composite video 1vp-p (75 ohm) mono input 400 mvrms 0.5 watt max. 7 languages -10˚c ~ 60˚c -...
Memo.
Memo.
Instruction manual.
