Printed in korea ver. 1.0 instruction manual thank you for purchasing this product. For correct use and application, please read this instruction manual thoroughly. Sv-420 / sv-430 rear-view system for vehicle * design and specifi cations could be changed without notices..
3 contents rear-view system for vehicle safeguard instructions feature box contents function of each part functions installation cable connection specifications ......................................... 4 ..............................................................................6 ..................
4 rear-view system for vehicle safeguard instructions please pay attention to the warnings and cautions listed in order to prevent the potential risks. “warning” and “caution” symbols are divided according to the different level of risk. Should install while power off. (after install products, conne...
5 do not place near of air bag effective range. - it may cause malfunction of air bag or accident, injury due to hitting monitor by air bag. Keep clean dust on power socket. - it may cause electronic shock and fire by bad connection. Do not pull cord with a jerk, should catch a plug and pull. Do not...
6 rear-view system for vehicle feature 1 rear-view system for vehicle box contents 2 • adopting high resolution lcd panel • all functions are displayed on screen (osd function) • 5 languages display selection (eng-deu-ita-fra-esp) [ cm-430 monitor ] • 1/3” 960h color ccd • 5 pcs of ir leds for night...
7 rear-view system for vehicle function of each part 3 [ cm-430 monitor ] 2. Menu 3. Volume 4. Power 1. Display power on/off menu setting and change volume setting 5. Speaker 6. Cable guidance 7. Bracket max. 0.5w(mono) - - stand bracket connect part 4.3” tft lcd (480x272).
8 rear-view system for vehicle functions 4 1) power on : if you push, power on. (stand by state is off) 2) power off : if you push again, power off. 1. Power on/off 2. Button function the menu changes [brightness] - [contrast] - [color] - [tint] - [dimmer] - [language] - [monitor] - [reset] every pu...
9 color 50 on color setting mode, △▽ buttons control density of screen color. (0~100) [0 : low density / 100 : high density] ·[tint] : screen color adjusting tint 50 on tint setting mode △▽ buttons control screen color. (0~100) ·[dimmer] : automatic brightness adjusting dimmer day on dimmer setting ...
10 rear-view system for vehicle installation 5 1. Remove protecting tape from below of stand and attach stand with double stick tape. 2. Fix a stand with enclosed 3 screws. 3. Connect stand and monitor. Monitor installation.
11 1. Determine a position and direction of installation and attach a camera bracket using double stick tape and screws. 2. Connect a camera with bracket on vehicle and fix them with screws. After that fix a sun visor with screws. 3. Run the cable as following cable connection guide. 1. Determine a ...
12 monitor cable trg dc in (12v~24v) camera or extension cable (for trg) extension cable (for camera) rear-view system for vehicle cable connection 6 before making the connection, disconnect the ground terminal of the car battery to avoid short circuiting. When use extension cable, connect it as fol...
13 ntsc/pal composite video (cvbs) 75Ω 1vp-p mono dc 12v - 24v 200ma max. 0.5w 5 languages -30˚c ~ 70˚c -40˚c ~ 80˚c 140(w) x 83(h) x 20(d) mm about. 238.5g (monitor only) video signal audio signal operating voltage current consumption input system speaker osd display language operating temperature ...
14 cm-200 (camera) cm-36 (camera) 1/3” 960h color ccd 168(d) / 125(h) 0.1lux (f=2.0) 700 tv lines dc12v / 90ma -30°c ~ 70°c 36.6(w) x 27(h) x 38.2(d) mm 80g (body only) 1/3” 960h color ccd 120(d) / 95(h) 0.1lux (f=2.0) 700 tv lines dc12v / 110ma -30°c ~ 70°c 89(w) x 57.2(h) x 60.5(d) mm 266g (body o...
15 memo rear-view system for vehicle.
Instruction manual instruction manual.
