Campbell Com100 Instruction Manual - page 5
HOW TO GET STARTED:
1. Take the COM100 phone package to your cellular service provider to program the phone and setup
your service agreement. If your service provider has any questions regarding programming of the
phone, have them contact the Motorola Cellular Information Center at 1-800-331-6456.
2. To program your phone your cellular service provider will need:
a. COM100 cellular phone package and ESN described in step 3.
b. Motorola Handset supplied by your Service Provider (Model SCN2504A or equivalent).
c. **Power Control Cable provided by CSI or Motorola Power Cable (Model SKN4302A or equivalent ).
**SEE WARNINGS PAGE 4.
3. The information your service provider will need to program the phone will be the Manufacturer of the
Cellular Phone (i.e., Motorola) and the Electronic Serial Number (ESN). The ESN is located on a
bar-coded label on the back of the cellular phone. The actual location* of the ESN on the label can
be seen in the example below and is shown as bold characters (Example: D57E1504). The ESN
always consists of 8 characters.
LABEL #1
SUN19008SC
|||| ||||||||| |||| ||||||| |||||| ||||||
MH2
376H
*D57E1504
416S-18-5F61
||| |||| ||||||| |||||| |||| ||||| ||||
N0515281
To date (March 1997) the ESN on all Motorola Cellular phones will begin with
82
C3
D4
D5
E0
Additional information regarding your phone can be found on a second label shown on the back of the
phone. This label is located directly below the one described above.
LABEL #2
MFG. BY MOTOROLA
FCC ID:
IHDT5SZ1
EE3
Tx POWER OUTPUT = 3W
MODEL:
19370XNMSA
CANADA: DNKA 109 182 197
MSN:
327GWUH6588
Prt Pwr 12VDC Neg Gnd
For future reference we recommend that you record the following information regarding your COM100
cellular phone:
Example
ESN:
D57E1504
Model:
19370XNMSA
MSN (Serial #):
327GWUH658