Campbell Hausfeld DG480200CK Operating Instructions And Parts Manual
DG480200CK
16
Sheet Sanders
Operating Instructions and Parts Manual
DG480200CK
Description
Sheet sanders are designed for the
sanding and polishing of wood, iron,
plastic, and similar materials. This
sander has a dust bag to keep the
working surface clean and dust free.
This sander has a dust-proof switch for
increased durability. The sealed switch
extends the life of the tool by keeping
dust and particulates from entering
into the internal components of the
tool.
Unpacking
When unpacking this product, carefully
inspect for any damage that may have
occurred during transit.
General Safety
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates
an imminently
hazardous situation which, if not
avoided, will result in death or serious
injury.
Warning indicates
a potentially
hazardous situation which, if not
avoided, could result in death or serious
injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, may result in minor or moderate
injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
NOTICE
!
CAUTION
!
WARNING
!
DANGER
CALIFORNIA PROPOSITION 65
You
can
create dust when you cut,
sand, drill or grind
materials such as wood,
paint, metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
This product or its
power cord contains chemicals known
to the State of California to cause
cancer and birth defects or other
reproductive harm. Wash hands after
handling.
The following safety precautions must be
followed at all times along with any
other existing safety rules.
1. Read all manuals
included with this
product carefully. Be
thoroughly familiar with
the controls and the
proper use of the
equipment.
2. Only persons well acquainted with
these rules of safe operation should
be allowed to use the tool.
!
WARNING
!
DANGER
IN713700AV 3/06
Safety
glasses and ear protection
must be worn during
operation.
3. Do not wear loose fitting clothing,
scarves, or neck ties in work area.
Loose clothing may become caught
in moving parts and result in serious
personal injury.
4. Do not wear jewelry when
operating any tool. Jewelry may
become caught in moving parts and
result in serious personal injury.
5. Always use attachments designed
for use with this tool. Do not use
damaged or worn attachments.
6. Never trigger the tool when not
applied to a work object.
!
WARNING
© 2006 Campbell Hausfeld/Scott Fetzer
MANUAL
BUILT TO LAST
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
See Warranty on page 5 for important information about commercial use of this product.
For parts, product & service information
visit www.chpower.com
Specifications
Tool
Voltage
120V 60Hz
Power Rating
1.5 A
Sanding Surface
1/4 sheet
Weight
3.1 lbs.
Notes
Notes
Notas