Campbell Hausfeld IN724801AV Operating Instructions Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions
SB303000
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
IN724801AV 7/09
© 2009 Campbell Hausfeld/Scott Fetzer
Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the American
National Standard Institute/International Staple, Nail and Tool Association in ANSI/ISANTA
SNT-101-2002.
For parts, product & service information
visit
www.chpower.com
Table of Contents
Description . . . . . . . . . . . . . . . . . . . . . .1
Unpacking . . . . . . . . . . . . . . . . . . . . . . .1
Safety Guidelines . . . . . . . . . . . . . . . . .1
Important Safety Instructions . . . . . . .1
Tool Components and
Specifications. . . . . . . . . . . . . . . . . . . . .2
Operating Instructions . . . . . . . . . . . . .4
Lubrication . . . . . . . . . . . . . . . . . . . . .4
Recommended Hookup. . . . . . . . . . .5
Operational Mode . . . . . . . . . . . . . . .5
Work Contact Element (WCE) . . . . . .5
Loading/Unloading The Tool. . . . . . .6
Adjusting the Fastener
Penetration. . . . . . . . . . . . . . . . . . . . .6
Adjusting the Direction
of the Exhaust . . . . . . . . . . . . . . . . . .6
User-Maintenance Instructions . . . . . .6
Clearing A Jam From The Tool . . . . .6
Technical Service . . . . . . . . . . . . . . . .6
Fastener And Replacement Parts . . .6
Tool Repair . . . . . . . . . . . . . . . . . . . . .6
Assembly Procedure For Seals . . . . . .6
Fasteners . . . . . . . . . . . . . . . . . . . . . . . .7
Troubleshooting Chart . . . . . . . . . . . . .7
Warranty . . . . . . . . . . . . . . . . . . . . . . . .8
Description
This tool is designed for decorative
trim, molding, window casings,
furniture trim, picture frame assembly,
cabinetry, casebacks, and crafts.
Features include: convenient top
loading magazine which holds up to
100 brads or staples, adjustable depth
control, adjustable exhaust.
Unpacking
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service.
Model SB303000
Safety Guidelines
This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger
indicates
an imminently
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
Warning
indicates
a potentially
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
Caution
indicates
a potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Notice
indicates
important
information, that if not followed, may
cause damage to equipment.
NOTE:
Information that requires special
attention.
Important Safety Instructions
INSTRUCTIONS PERTAINING TO A
RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS
This manual contains safety, operational
and maintenance information. Contact
your Campbell Hausfeld representative
if you have any questions.
When using tools,
basic
precautions
should always be followed, including
the following:
Locate model and date code on
tool magazine and / or body, and
record below:
Model No.: _____________________
Date Code: _____________________
Retain these numbers for
future reference.
CALIFORNIA PROPOSITION 65
This product or
its power cord may
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
You can create dust when
you cut, sand, drill or grind
materials such as wood,
paint, metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
2-in-1 Nailer / Stapler