Campbell Hausfeld IN729300AV Operating Instructions Manual

Manual is about: Campbell Hausfeld 1-1/4 inch Stapler Operating Instructions

Summary of IN729300AV

  • Page 1

    Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Reta...

  • Page 2

    2 operating instructions sn338k00 www.Chpower.Com employer’s responsibility: • selecting an appropriate tool actuation system, taking into consideration the work application for which the tool is used. • ensuring that this manual is available to operators and personnel performing maintenance. • the ...

  • Page 3

    3 operating instructions sn338k00 www.Chpower.Com for use with this tool by the tool manufacturer are able to result in a risk of injury to persons or tool damage when used in this tool. I. Selecting an appropriate tool actuation system, taking into consideration the work application for which the t...

  • Page 4

    4 operating instructions sn338k00 www.Chpower.Com important safety instructions (continued) never carry the tool by the air hose or pull the hose to move the tool or a compressor. Keep hoses away from heat, oil and sharp edges. Replace any hose that is damaged, weak or worn. Personal injury or tool ...

  • Page 5

    5 operating instructions sn338k00 www.Chpower.Com operating instructions (continued) recommended hookup the illustration below shows the recommended hookup for the tool. 1. The air compressor must be able to maintain a minimum of 60 psi when the tool is being used. An inadequate air supply can cause...

  • Page 6

    6 operating instructions sn338k00 www.Chpower.Com operating instructions (continued) loading/unloading the tool 1. Always disconnect the tool from the air supply before loading fasteners. 2. Push down on the latch button. Pull back on the magazine cover. 3. Load a clip of staples with the crowns str...

  • Page 7

    7 operating instructions sn338k00 www.Chpower.Com fasteners staples the following campbell hausfeld finishing fasteners are available at local retail stores. If you need help locating any item, call customer service at 1-800-543-6400. Campbell hausfeld fasteners meet or exceed astm standard f1667. M...

  • Page 8

    8 operating instructions sn338k00 www.Chpower.Com troubleshooting chart stop using tool immediately if any of the following problems occur. Serious personal injury could occur. Any repairs or replacements must be done by a qualifi ed service person or authorized service center. Symptom possible caus...

  • Page 9

    9 operating instructions sn338k00 www.Chpower.Com date maintenance performed repair components required service record.

  • Page 10

    10 operating instructions sn338k00 www.Chpower.Com limited warranty 1. Duration: from the date of purchase by the original purchaser as follows: one (1) year. 2. Who gives this warranty (warrantor): campbell hausfeld / scott fetzer company, 100 production drive, harrison, ohio, 45030, telephone: (80...

  • Page 11: Agrafeuse De

    S’il vous plaît lire et conserver ces instructions. Lire attentivement avant de monter, installer, utiliser ou de procéder à l’entretien du produit décrit. Se protéger ainsi que les autres en observant toutes les instructions de sécurité, sinon, il y a risque de blessure et/ou dégâts matériels! Cons...

  • Page 12

    12-fr instructions d’utilisation sn338k00 responsabilitÉ de l’employeur : • choisir un système d'activation de l'outil approprié en tenant compte de l'application de travail prévue pour l'outil. • s'assurer que ce manuel soit disponible pour les opérateurs et le personnel responsable de l'entretien....

  • Page 13

    13-fr instructions d’utilisation sn338k00 si l’outil est endommagé, le réparer avant de l’utiliser. De nombreux accidents sont causés par des outils mal entretenus. Il y a un risque d’éclatement si l’outil est endommagé. H. Utiliser seulement les attaches indiquées dans la section des accessoires de...

  • Page 14

    14-fr instructions d’utilisation sn338k00 importantes instructions de sécurité (suite) toujours installer un raccord ou un tuyau de raccord sur ou près de l'outil afi n que tout air comprimé de l'outil soit déchargé au moment où l'on débranche le raccord ou le boyau. Ne pas utiliser un clapet ni aut...

  • Page 15

    15-fr instructions d’utilisation sn338k00 mode d’emploi (suite) branchement recommandÉ le branchement recommandé est illustré ci-dessous. 1. Le compresseur d’air doit conserver un minimum de 414 kpa pendant l’utilisation de l'outil. L’alimentation d’air insuffisante peut réduire la puissance de l'ou...

  • Page 16

    16-fr instructions d’utilisation sn338k00 mode d’emploi (suite) chargement / dÉchargement de la cloueuse 1. Toujours débrancher l'outil à l'alimentation d'air avant de charger les attaches. 2. Soulever le loquet. Tirer sur le couvercle du chargeur. 3. Remplir un chargeur d’agrafes avec les couronnes...

  • Page 17

    17-fr instructions d’utilisation sn338k00 attaches agrafes les attaches pour finition campbell hausfeld sont disponibles aux magasins dans votre quartier. Pour de l’assistance, composer le 1-800-543-6400. Les attaches campbell hausfeld sont conformes ou supérieurs à la norme astm f1667. Modèle longu...

  • Page 18

    18-fr instructions d’utilisation sn338k00 guide de dépannage cessez l’utilisation de la cloueuse immédiatement en cas des problèmes suivants, car il résultat risque de blessures graves. Toutes réparations doivent être effectuées par un technicien qualifi é ou par un centre de service autorisé. Probl...

  • Page 19

    19-fr instructions d’utilisation sn338k00 date entretien exécuté Éléments de remplacement requis enregistrement d’entretien.

  • Page 20

    20-fr instructions d’utilisation sn338k00 garantie limitée 1. DurÉe: À partir de la date d’achat par l’acheteur original comme suit - un an. 2. Garantie accordÉe par (garant): campbell hausfeld/scott fetzer company, 100 production drive, harrison, ohio, 45030, téléphone: (800) 543-6400 3. BÉnÉficiai...

  • Page 21: Grapadora De

    Por favor lea y guarde estas instrucciones. Léalas cuidadosamente antes de tratar de montar, instalar, operar o dar mantenimiento al producto aquí descrito. Protéjase usted mismo y a los demás observando toda la información de seguridad. ¡el no cumplir con las instrucciones puede ocasionar daños, ta...

  • Page 22

    22-sp manual de instrucciones de operación sn338k00 responsabilidad del empleador: • seleccionar un sistema de activación de la herramienta adecuado, tomando en cuenta la aplicación de trabajo para la cual se usa la herramienta. • asegurarse de que este manual esté disponible para los operadores y e...

  • Page 23

    23-sp manual de instrucciones de operación sn338k00 instrucciones de seguridad importantes (cont.) c. Mantenga alejados a los observadores, niños y visitantes mientras hace funcionar la herramienta. Las distracciones pueden dar como resultado la pérdida del control de la herramienta. Seguridad perso...

  • Page 24

    24-sp manual de instrucciones de operación sn338k00 desconecte siempre la herramienta de la fuente de energía cuando no la esté atendiendo, cuando le esté realizando mantenimiento o reparaciones, desobstruyéndola o moviéndola a un nuevo sitio. No cargue la herramienta con sujetadores cuando el gatil...

  • Page 25

    25-sp manual de instrucciones de operación sn338k00 2. Gire la herramienta de modo que la entrada de aire quede mirando hacia arriba. Agregue de 4 a 5 gotas de aceite no detergente 30w en la entrada de aire. No use aceites detergentes, aditivos de aceite, ni aceites para herramientas neumáticas. Los...

  • Page 26

    26-sp manual de instrucciones de operación sn338k00 instrucciones de funcionamiento (cont.) 6. Remueva la clavadora de la superficie de trabajo. El elemento de contacto de trabajo tiene que volver a su posición original. La clavadora no debe operar. No use la herramienta si opera mientras está levan...

  • Page 27

    27-sp manual de instrucciones de operación sn338k00 sujetadores grapas estas grapas para acabado de campbell hausfeld los puede comprar en su tienda más cercana. Si necesita ayuda para encontrar un artículo, comuníquese al 1-800-543-6400. Las grapas de campbell hausfeld cumplen o exceden el estándar...

  • Page 28

    28-sp manual de instrucciones de operación sn338k00 guía de diagnóstico de averías deje de usar la grapadora inmediatamente si alguno de los si guientes problemas ocurre. Podría ocasionarle heridas graves. Cualquier reparación o reemplazo de piezas los debe hacer un técnico califi cado personal de u...

  • Page 29

    29-sp manual de instrucciones de operación sn338k00 fecha maintenimiento efectuado componentes de reparación necesarios registro de servicios.

  • Page 30

    30-sp manual de instrucciones de operación sn338k00 garantía limitada 1 duracion: a partir de la fecha de compra por el comprador original tal como se especifica a continuación: un (1) año. 2. Quien otorga esta garantia (el garante: campbell hausfeld / the scott fetzer company 100 production drive, ...

  • Page 31

    31 operating instructions  instructions d’utilisation  manual de instrucciones de operación sn338k00 notes / notes / notas.

  • Page 32

    32 operating instructions  instructions d’utilisation  manual de instrucciones de operación sn338k00 notes / notes / notas.