Campbell Hausfeld NB0050 Operating Instructions Manual

properly. Do not use a compressed

air source capable of more than 200

PSI. The nailer could explode and

cause death or serious personal

injury.

● Never use gasoline or

other flammable liq-

uids to clean the nail-

er. Never use the nail-

er in the presence  of

flammable liquids or

gases. Vapors could ignite by a spark

and cause an explosion which will

result in death or serious personal

injury.

● Always place

yourself in a

firmly balanced

position when

using or han-

dling the

nailer.

● Do not modify

or disable the

Work Contact

Element (WCE)

in a depressed

position or tape

or modify the

trigger in a pulled position. Death or

serious personal injury will occur.

● Never keep the

trigger pulled

when carrying

or holding the

nailer. Make

sure not to pull

the trigger or

depress the

work contact element (WCE) trip

mechanism when connecting the

nailer to an air compressor. Death or

serious puncture wounds will occur

if the work contact element (WCE)

bumps something. 

Finishing Nailer

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury, death

and/or property damage! Retain instructions for future reference.

General Safety Information

This manual contains safety, operational

and maintenance information.

Read this manual and

understand all safety

warnings and instruc-

tions before operating

the nailer. Contact your

Campbell Hausfeld rep-

resentative if you have any questions.

The operator of this nailer must take

the necessary precautions to prevent

unsafe conditions outlined in this manu-

al from occurring. The operator is also

required to read and understand this

instruction manual and all safety warn-

ings, labels, etc.

Any employer allowing the use of this

nailer in their field of work must dis-

tribute this instruction manual to all

users. The employer must also ensure

all users read, understand and follow

the instructions as described in the

manual, safety warnings, labels, etc.  

Danger indicates 

an imminently

hazardous situation which, if not

avoided, WILL result in death or serious

injury.

● Do not use any type

of flammable gases

or oxygen as a power

source for the nailer.

Use filtered, lubricat-

ed, regulated com-

pressed air only. Use

of a compressed gas instead of 

compressed air may cause the nailer

to explode and cause death or 

serious personal injury.

● Do not exceed maxi-

mum operating pres-

sure of the nailer

(110 PSI). The nailer

will not function

Operating Instructions

Model NB0050

IN247201AV 1/97

Description

This nailer is designed for trimwork, interior molding, baseboards, paneling and

cabinet assembly and installation. Features include: convenient side loading maga-

zine which holds up to 100 nails, no-mar tip, adjustable exhaust, single cycle trig-

ger and quick clear nose.

Warning indicates

a potentially haz-

ardous situation which, if not avoided,

COULD result in death or serious

injury.

● Disconnect the

nailer from air

supply before

adjusting, clear-

ing jams, servic-

ing, relocating

and during non-

operation. Remember it is possible

for the nailer to eject a fastener

after servicing the tool. ALWAYS

reconnect the air lines before load-

ing any fasteners. Death or serious

personal injury could result.

● Protect your eyes and

ears. Wear Z87 safety

glasses, with side

shields. Wear hearing

protection. Employers

and users are respon-

sible for ensuring the

user or anyone near

the nailer wears this

safety protection.

Serious eye injury or

permanent hearing

loss could result. 

● Do not use a

check valve or

any other fit-

ting which

allows air to

remain in the

nailer. Serious

personal injury

could occur.

MANUAL

CAMPBELL

HAUSFELD

Model NB0050

CAMPBELL

PROFESSIONAL

HAUSFELD

110 PSI

O

CO

2

Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the American

National Standard/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-1993.

© 1996 Campbell Hausfeld