Campbell Hausfeld PW1345 Assembly Instructions And Parts List
Garden Hose Connection
GARDEN HOSE CONNECTION
INSTRUCTIONS
1. Attach nipple adapter to inlet fit-
ting on the unit (this may already be
attached to the pump).
2. Attach quick connect fitting to
garden hose.
3. Pull side “A” of quick connect fit-
ting toward garden hose and push
onto nipple adapter.
4. Push side “A” of quick connect fit-
ting towards nipple adapter and
release.
"A"
Figure 2 - Garden Hose Connection
Quick Connect Fitting
Garden Hose
Nipple
Adapter
Electric Pressure
Washer
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop-
erty damage! Retain instructions for future reference.
IN456800AV 10/99
© 1999 Campbell Hausfeld
Specifications
Max Pressure with
Effective Pressure
Maximum
Motor Power
Maximum Inlet
Unit
Model
Standard Lance
w/Turbo Lance
Capacity
(Single Phase)
Voltage
Water Temperature
Weight
Assembly Instructions
Assembly Instructions and Parts List
PW1345, PW1346, PW1350 , PW1375, and PW1376
! IMPORTANT !
This pressure washer maybe
equipped with a microswitch sensi-
tive to water flow. This Instant
Start/Stop switch (ISS) senses water
flow in the pump. When the trigger
is released, water stops flowing
through the pump. The ISS then
automatically turns the motor off to
protect pump from overheating.
OPERATION
1. Turn the “ON/OFF” switch to
“ON”.
2. Pull trigger on gun to begin
spraying water.
3. Release trigger. The pressure
washer motor will stop running.
4. To spray again, pull trigger and
motor and pump will restart.
Note
: Occasionally the motor may
run for a short time to bring fresh,
cool water into the pump even if
trigger is released. This is part of
normal operation and will not dam-
age the unit.
Always turn the
“ON/OFF” switch
to “OFF” then trigger gun to release
hose pressure before unplugging
power cord.
Risk of Injection.
Unit will start
spraying when trigger is squeezed if
on/off switch is in “ON” position.
Always point gun in safe direction.
Call 1-800-330-0712
for Technical Service
NOTE: REFER TO PRODUCT MANUAL FOR
ALL SAFETY INSTRUCTIONS
For parts, product & service information
visit
www.campbellhausfeld.com
Notas
Instrucciones de montaje y lista de piezas
PW1345, PW1346, PW1350, PW1375, y PW1376
U
L
Approved
#7P64
No. de
Número del
Ref.
Descripción
Repuesto
Ctd.
Para ordenar repuestos, sírvase llamer al 1-800-330-0712 (En
los Estados Unidos, o llame a su distribuidor local)
Sírvase proporcionar la siguiente información:
-Número de modelo
-Número de serie (si lo hubiera)
-Descripción y número del repuesto, según se indica en la lista de repuestos.
Dirija su correspondencia sobre repuestos a:
The Campbell Group / Parts Dept.
100 Production Drive
Harrison, OH 45030 U.S.A.
1
Lanza regulable
PM035101AV
1
* 2
Lanza turbo
PM022621AV
1
3
Manguera
PM012902AV
1
4
Pistola
PM037201AV
1
5
Niple adaptador
PM022100AV
1
6
Conector rápido
PM020600SV
1
7
Limpiador de puntas
PM008500AV
1
8
Aplicador de detergente
PM014700SV
1
* 9
Juego de ruedas (2)
PM014100SJ
1
*10
Mango
PM014200SV
1
*11
Tapa de la caja de herramientas
HV601500SV
1
*12
Caja de herramientas
HV601600SV
1
* Equipo opcional, tal vez no se suministre con todos los modelos.
Figure 1
PW1345
1300 psi
—
1.8 GPM
13 Amps
120V
100˚F
25 lbs.
PW1346
1300 psi
—
1.8 GPM
13 Amps
120V
100˚F
25 lbs.
PW1350
1300 psi
—
1.8 GPM
13 Amps
120V
100˚F
25 lbs.
PW1375
1300 psi
1750 psi
1.8 GPM
13 Amps
120V
100˚F
25 lbs.
PW1376
1300 psi
1750 psi
1.8 GPM
13 Amps
120V
100˚F
25 lbs.