Campbell Hausfeld TL140289 Operating Instructions Manual

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. 

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or 

property damage! Retain instructions for future reference.

For parts, product & service information

visit 

www.chpower.com

REMINDER: Keep your dated proof of purchase for warranty purposes! 

Attach it to this manual or file it for safekeeping.

IN738200AV 1/12

See Warranty on page 6 for important information about commercial use of this product.

Operating Instructions

TL140289

© 2012 Campbell Hausfeld/Scott Fetzer

Impact 

Wrenches

Table of Contents

Description   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .1

Unpacking  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .1

Safety Guidelines   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .1

General Safety Information  .  .  .  .  .  .  . 1-2

Operation   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .2

Storage   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3

Troubleshooting Chart  .  .  .  .  .  .  .  .  .  .  .  .  .4

Warranty   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .6

Description

Impact wrenches are air tools designed 

for removing and installing nuts and 

bolts . Impact wrenches have different 

impact mechanism types such as rocking 

dog, pin clutch and twin hammer 

(double jumbo) .

The rocking dog and pin clutch types 

are used as general purpose tools by 

DIY’ers and hobbyists . Twin hammer 

wrenches are for use by the professional 

in tire shops, assembly line applications 

and for removing high torque bolts .

Unpacking

When unpacking this product, carefully 

inspect for any damage that may have 

occurred during transit . Make sure any 

loose fittings, bolts, etc ., are tightened 

before putting this product into service .

READ & FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS 

DO NOT DISCARD

Safety Guidelines

This manual contains information 

that is very important to know and 

understand . This information is 

provided for SAFETY and to PREVENT 

1 .   Read all manuals included 

with this product 

carefully . Be thoroughly 

familiar with the controls 

and the proper use of the 

equipment .

2 .   Only persons well acquainted with 

these rules of safe operation should 

be allowed to use the air tool .

Do not  

 exceed 

maximum operating pressure 

of the air tool (90 PSI). The air 

tool could explode and result 

in death or serious personal injury.

3 .   Do not exceed any pressure rating of 

any component in the system .

4 .   Disconnect the air tool from air 

supply before changing tools or 

attachments, servicing and during 

non-operation .

 Safety 

 glasses 

and ear protection must be 

worn during operation.

5 .   Do not wear loose fitting clothing, 

scarves, or neck ties . Loose clothing 

may become caught in moving parts 

and result in serious personal injury .

6 .   Do not wear jewelry when operating 

any tool . Jewelry may become 

caught in moving parts and result in 

serious personal injury .

7 .   Do not depress trigger when 

connecting the air supply hose .

8 .   Always use attachments designed 

for use with air powered tools . 

Do not use damaged or worn 

attachments .

Do not use hand 

  tool sockets. Use 

impact quality sockets only. Hand 

tool sockets are “glass-hard” and will 

shatter and can cause serious personal 

injury if used with air tools.

EQUIPMENT PROBLEMS . To help 

recognize this information, observe the 

following symbols .

Danger indicates an  

 imminently 

hazardous situation which, if not 

avoided, WILL result in death or serious 

injury.

Warning indicates a  

 potentially 

hazardous situation which, if not 

avoided, COULD result in death or 

serious injury.

Caution indicates a  

 potentially 

hazardous situation which, if not 

avoided, MAY result in minor or 

moderate injury.

Notice indicates  

 important 

information, that if not followed, may 

cause damage to equipment.

NOTE:

 Information that requires special 

attenion

General Safety Information

CALIFORNIA PROPOSITION 65

You can 

  create 

dust when you cut, sand, drill 

or grind materials such as 

wood, paint, metal, concrete, 

cement, or other masonry. This dust 

often contains chemicals known to 

cause cancer, birth defects, or other 

reproductive harm. Wear protective 

gear.

GENERAL SAFETY

This product is a part of a high pressure 

system and the following safety 

precautions must be followed at all 

times along with any other existing 

safety rules .

MANUAL

REGISTER YOUR PRODUCT ONLINE NOW!     http://www.chpower.net/reg