Campbell Hausfeld WL6000 Series Operating Instructions Manual

Since the air compressor and other

components (material pump, spray

guns, filters, lubricators, hoses, etc.)

used, make up a high pressure

pumping system, the following safety

precautions must be observed at all

times:

1. Read all manuals

included with this

product carefully. Be

thoroughly familiar

with the controls and

the proper use of the equipment.

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or

property damage! Retain instructions for future reference.

© 1997 Campbell Hausfeld

Operating Instructions  

WL6000 Series

IN203402AV  11/97

Breathable Air Warning

This compressor/pump is NOT

equipped and should NOT be used “as

is” to supply breathing quality air. For

any application of air for human

consumption, you must fit the air

compressor/pump  with suitable in-line

safety and alarm equipment. This

additional equipment is necessary to

properly filter and purify the air to

meet minimal specifications for Grade

D breathing  as described in

Compressed Gas Association

Commodity Specification G 7.1 - 1966,

OSHA 29 CFR 1910. 134, and/or

Canadian Standards Associations

(CSA).

DISCLAIMER OF WARRANTIES

IN THE EVENT THE COMPRESSOR IS

USED FOR THE PURPOSE OF

BREATHING AIR APPLICATION AND

PROPER IN-LINE SAFETY AND ALARM

EQUIPMENT IS NOT SIMULTANEOUSLY

USED, EXISTING WARRANTIES ARE

VOID, AND CAMPBELL HAUSFELD

DISCLAIMS ANY LIABILITY

WHATSOEVER FOR ANY LOSS,

PERSONAL INJURY OR DAMAGE.

MANUAL

STOP!

Record the Model No., Serial No. and

date of purchase located on the base

below the pump in the space below.

Model No. ____________________

Serial No. ____________________

Date of purchase _________________

Retain these numbers for future

reference.

Q

UA

LIT

Y

A

SSURANCE

P

ROG

RA

M

Need

Assistance?

Call Us First!

1-800-543-8622

Oilless

Stationary

Compressors

questions, damaged or missing parts,

please call 1-800-543-6400 for customer

assistance or call the nearest Campbell

Hausfeld Authorized Service Center.

A listing of service center locations is

enclosed. Have the serial number,

model number and parts list (with

missing parts circled before calling).

Do not operate 

unit if damaged

during shipping, handling or use.

Damage may result in bursting and

cause injury or property damage.

Oilless compressors are designed for

do-it-yourselfers with a variety of home

and automotive jobs. These compres-

sors will power spray guns, impact

wrenches and other tools. These units

operate without oil.

This manual contains information that

is very important to know and

understand. This information is

provided for SAFETY and to PREVENT

EQUIPMENT PROBLEMS. To help

recognize this information, observe the

following symbols. 

Danger indicates 

an imminently

hazardous situation which, if not

avoided, WILL result in death or serious

injury.

Warning indicates 

a potentially

hazardous situation which, if not

avoided, COULD result in death or

serious injury.

Caution indicates a 

potentially

hazardous situation which, if not

avoided, MAY result in minor or

moderate injury.

Notice indicates 

important

information, that if not followed, MAY

cause damage to equipment.

After unpacking the unit, inspect

carefully for any damage that may have

occurred during transit. Make sure to

tighten fittings, bolts, etc., before

putting unit into service. In case of

!

NOTICE

BUILT TO LAST

TM

Safety Guidelines

Description

Unpacking

DO NOT RETURN THE

PRODUCT TO THE

RETAILER!

General Safety

Information