Campomatic FP700 grand chef Instruction Manual - Fp700
5
FP700
HOW TO USE IT
Your new food processor will help you to prepare a lot of basic mixtures that you can use for
your recipes.
Please abide by the following instructions to achieve the best results and to keep your appli
-
ance in good working condition.
ATTENTION!
Never exceed the maximum quantities below and never pour liquids hotter than 75
0
C into
the bowl and/or blender
Follow the instructions given below every time you use it:
-Never leave the appliance unattended while it is on.
-Never make the appliance work while it is empty.
-Never touch the m oving parts.
-Never put your fingers or utensils inside the lid opening.
-Never press down the ingredients into the lid opening with your hands.
-Do not use the appliance to work hard ingredients (e.g. frozen meat, crusts of cheese…),
rubbery (e.g. candied peel…), and uneatable parts of ingredients (e.g. bones, fishbone…)
or crush ice.
-Do not remove the lid and never replace accessories without switching off the appliance
and if the accessory being used has not stopped working.
-Do not remove the ingredients from the bowl before removing the blade.
I. CHOPPING FUNCTION
1 Put the plastic bowl on power unit and turns the handle in clock-wise direction.
2 Put the blade support on the axis in the middle of the bowl, and press it to the bottom.
Then fix the chopping blade to the blade support, as shown in Diagram 2.
Warning: The blade in sharp. Please only hold the plastic part while using.
3 Put the food (e.g. Meet) into the bowl, as shown in Diagram 3. Big piece food needs to be
cut into small pieces. (ca. 2 CM x 2 CM x 2 CM).
4 Put the cover on the bowl, and turn it until hearing the chattering sound, as shown in Dia
-
gram 4.
5 Fix the plug to the electric socket, rotating the button switch to choose the suitable speed,
there are 10 different speeds in all, as shown in Diagram8.
6 PULSE is a touch switch, used for intermittent operation, by which the appliance can
achieve the maximum speed of that moment.
7 When the chopping is finished, rotate the button switch to “0”.After the blade stops, pour
out the food.