Campomatic NT30 titanium Instruction Manual - Hc20W
4
hc20w
ENG
CLEANING THE TRIMMER:
Be sure that the switch is turned off before removing, assembling or cleaning blades.
1. As shown in the figure, switch trimmer off, remove the outer blade frame by twist-
ing counterclockwise and raising it upward. Wipe the blades with a tissue or
cleaning brush (included) to remove any cut hairs, dust, etc.
2. Place the outer blade back on to the top body by pushing down gently and twist-
ing clockwise.
3. Replace the protective cap.
OPERATIONS:
1. Remove the battery cover, and place a one AA battery in the appropriate position.
Make sure to set the right polarity with guidance of the indicating symbol.
2. Close the battery cover.
3. Push the switch button to ON
IMPORTANT NOTICE:
1.
This nose and ear hair trimmer is not suitable for hair or moustache
2.
Clean the cutting blades with a soft brush. Never rinse or immerse in water.