1. DL manuals
  2. Campomatic
  3. Washer
  4. WM 911 XEW
  5. Owner's Manual

Campomatic WM 911 XEW Owner's Manual - Control Panel

Summary of WM 911 XEW

  • Page 1

    Wm 911 xew washing machine.

  • Page 2: 1 Warnings

    2 - en 1 warnings general safety • never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine. • if the power cable or mains plug is damaged you must call authoriz...

  • Page 3: 2 Installation

    3 - en 2 installation removing packaging reinforcement tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Opening the transportation locks a transportation safety bolts must be removed before operating the washing machine! Otherwise, the...

  • Page 4: Electrical Connection

    4 - en electrical connection connect the machine to an earthed outlet protected by a fuse of suitable capacity. Important: • connection should comply with national regulations. • the voltage and the allowed fuse protection are specified in the section “technical specifications”. • the specified volt...

  • Page 5: Control Panel

    5 - en figure 2 4 selecting a program and operating your machine 1 - spin speed adjustment button 2 - time delaying button (+/-) 3 - temperature adjustment button 4 - start/pause/cancel button control panel figure 1 7.A - spin speed indicator 7.B - temperature indicator 7.C - spin symbol 7.D - tempe...

  • Page 6: Additional P

    6 - en main programs depending on the type of textile, the following main programs are available: • cotton you can wash your durable clothes with this program. Your laundry will be washed with vigorous washing movements during a longer washing cycle. • synthetics you can wash your less durable cloth...

  • Page 7

    7 - en shown with “ ” symbols. If you do not want to unload your clothes immediately after the program, you may use the rinse hold function in order to prevent your clothes become wrinkled in an anhydrous condition. With this function, your laundry is kept in the final rinsing water. If you want to ...

  • Page 8: Auxiliary Functions

    8 - en auxiliary functions auxiliary function selection buttons c select the required auxiliary functions before starting the program. C some combinations cannot be selected together. (ex.: pre-wash) (figure 1-5a) and quick wash (figure 1-5b). Auxiliary function selection if an auxiliary function th...

  • Page 9: Child-Proof Lock

    9 - en switching the machine to standby mode press “start/pause/cancel” button momentarily to switch your machine to the standby mode. Auxiliary functions can be cancelled or selected in accordance with the step the program is at. The door can be opened if the water level is suitable. Laundry may be...

  • Page 10: Cleaning The Pump Filter

    10 - en by pulling out the plug at the end of the hose. If the amount of water to be drained off is greater than the volume of the container, replace the plug, pour the water out, then resume the draining process. • after draining process is completed, replace the plug into the end of the hose and f...

  • Page 11

    11 - en 6 solution suggestions for problems cause explanation / suggestion program cannot be started or selected. • machine may have switched to self protection mode due to an infrastructure problem (such as line voltage, water pressure, etc.). • reset your machine by pressing “start/ pause/cancel” ...

  • Page 12: 7  Specifications

    12 - en 7 specifications specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the documentation accompanying it are obtained in laborato...