Camsat CAM 5816h Multi-Rx Manual
CAMSAT
www.camsat.com
CAM 5816h Multi-Rx
8-channel RF 5.8 GHz wireless audio/video multi receiver
Nr rejestrowy GIOŚ E0012219W
Designed for wireless PAL or NTSC video signal receiving from 4 transmitters
CAM5816h-Tx or CAM5816h Muti-Tx over the radio-link on ISM 5.8 GHz band. Supports up
to 8 channels within 5725 to 5875 MHz frequency band. Each of 8 channels has factory
defined operating frequency. It has 4 Video BNC outputs and 8 Audio Outputs.
Contents of CAM5816hMulti-Rx package:
Video/Audio Receiver with integrated directional antenna.
Mounting bracket x 2 pcs.
User`s Manual
Specyfications:
Operating frequency
5,725
5,875 GHz
Output power
Modulation
FM
Output
VIDEO - 75
/ AUDIO - 600
Antenna Input
SMA (F) 50
Power supply
9
14V / 800mA DC
Operating temperature
-20 °C
+ 55 °C
Dimensions
245x165x100 mm
Weight
1,4 kg
Assembly:
Mount the device using U-bolts to stable mast or bracket. Place the antenna in
direction of transmitters. Gently screw the antenna cable into SMA antenna socket.
When screwing the
outer
rigid wire antenna pay
attention not
to
damage
the SMA socket on the receiver. Connect power to the receiver with a constant voltage of
12V DC and efficiency of at least 800mA. Connect the signal cables to the BNC video/
audio and power supply as described. Set the channel number and connect the power
supply to the first transmitter. Set the same channel number on the receiver, set or adjust
the antenna and accurately validate the transfer. If the transmission is correct start next
transmitter in the same way.