-20ºc ÷ +55ºc 9 v dc ÷ 14 v dc sma antenna connector ip65 8 channels bnc video bnc video utp video 5,8 ghz 25 mw fm pal ntsc video: 10 channels 869 mhz 300 mw gfsk rs-485 data: operating manual warranty terms cam-9 wireless system for simultaneous transmission of video, audio and control for ptz cam...
Table of contents product features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 kit contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 recommendations . . . . . ...
4 5 product features the cam-9 kit is an integrated transmission system comprised of a module for video transmission and data transmission to and from industrial cameras in a single compact case . Kit contents the kit includes: 1 3 5 4 2 antenna side 1 . Video/audio receiver (rx) with an ip65 antenn...
6 7 technical data dane audio-wideo frequency 869 mhz 5 .8 ghz number of operating channels 10 8/16* radio link modulation gfsk fm eirp radiated power 300 mw 25 mw receiver sensitivity −118 dbm@1200 bps / −114 dbm@9600 bps ≤ −85 dbm antenna connectors sma-rp f 50 Ω sma-rp f 50 Ω antenna characterist...
8 9 switch settings installation 1 . Fasten the transmitter and receiver to a stable pole with the mounts. 2 . Screw the 869 mhz [a] antennas into sma antenna connectors at the top of the case . 3 . Connect the video cables with the coaxial cable [m], or the utp twisted pair cable [n] . 4 . Connect ...
10 11 method for setting the transmission rate and data format 1 . In order to get to the settings, enter the device menu by holding the enter button [i] for three seconds (until appears on the display) . 2 . You can switch between the menu options ( , , ) by pressing the enter button [i] shortly . ...
12 13 setting the video operating channel remotely in order to set the video transmission operating channel (for a specific transmitter) remotely from the cam-9 m rx receiver level, do the following: 1 . Select the option from the main menu . 2 . Select the identification number of the transmitter w...
14 the warranty does not cover - mechanical damage of devices and failures occurring due to fortuitous events, such as: fire, power grid overvoltage, electrical discharges, power supply, effects of chemical substances. - damage occurring due to: improper handling of the device, using the device agai...
Manufacturer: camsat gralak przemysław ul . Ogrodowa 2a 86-050 solec kujawski product offer and information: www.Camsat.Com service: service@camsat.Com.