CANARY AUDIO CA-100 Owner's Manual - Tubes Installation
Diagram 1.1 Overview of CA-100
V12
V11
V10
V9
V4
V3
V2
V1
TUBES INSTALLATION
Be sure the amplifier is OFF before installing any tubes.
Avoid touching the tubes with bare hands to prevent skin oils from depositing on
the glass surface of the tubes.
Insert each tube in the corresponding socket. Refer to Diagram 1.1 for further
clarification.
The 6922 tubes are inserted into sockets designated as V1, V2, V5 and V6. Be
sure to align the pins with the socket holes when installing these tubes. Carefully
push down the tube into the socket with a gentle rocking motion until it is firmly
seated.
The 6CG7 tubes are inserted into sockets designated as V3 and V7. The 12BH7
tubes are inserted into sockets designated as V4 and V8. Be sure to align the
pins with the socket holes when installing these tubes. Carefully push down the
tube into the socket with a gentle rocking motion until it is firmly seated.
The EL34 / 6CA7 tubes are inserted into sockets designated as V9 to V16.
Align the center key of the tube base with the slot in the center of the socket.
Carefully push down the tube into the socket with a gentle rocking motion until
it is firmly seated.
V16
V15
V14
V13
V8
V7
V6
V5