CANARY AUDIO CA-301 Owner's Manual - Installing The Tubes
Diagram 1.1 Overview of CA-303 SE
V1
V3
V5
V2
V4
V6
INSTALLING THE TUBES
Be sure the amplifier is OFF before installing any tubes.
Avoid touching the tubes with bare hands to prevent skin oils from depositing on
the glass surface of the tubes.
Insert each tube in the corresponding socket. Refer to Diagram 1.1 for further
clarification.
The 6SN7 tubes are inserted into sockets designated as V5 and V6. Align the
center key of the tube base with the slot in the center of the socket. Carefully push
down the tube into the socket with a gentle rocking motion until it is firmly seated.
The 12AX7 tube is inserted into sockets designated as V7. Be sure to align the
pins with the socket holes when installing these tubes. Carefully push down the
tube into the socket with a gentle rocking motion until it is firmly seated.
The 300B tubes are inserted into sockets designated as V1 to V4. Pay extra
attention to the tube pins and socket holes for these tubes. Identify the two
larger pins and align the pins with the two larger holes on the socket. Carefully
push down the tube into the socket with a gentle rocking motion until it is firmly
seated.