C anary a udio ® vacuum tube stereo preamplifier handcrafted in california ca-906 owner’s manual made in usa.
! This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. The lightning flash with arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the p...
Safety instructions power source: • the unit should be connected to an ac power source of the proper rated voltage. • never replace the power supply’s line fuse with the one of incorrect characteristics. Ac cord protection: • do not defeat the grounding or polarization feature of the ac cord. • make...
Proper care break-in period: • as with most audio components, the ca-906 requires a “break-in” period. During this period the internal components will stabilize and reach their normal operating parameters. There are no special procedures required for this break-in period, just listening to your favo...
Unpacking • open the shipping boxes. • remove the accessories that come with the unit. • grasp the underside of the preamplifier and lift it straight out of the box. • place the preamplifier in a safe location. Remove the packing foam and the protective plastic wrapping. • after unpacking the ca-906...
Connection steps: 1. Place the ca-906-l and ca-906-p in a rack or on a shelf. The ca-906-l and ca-906-p do not require a special rack or cabinet for installation. 2. Neatly arrange and organize wiring to and from the preamplifier and all components. Separate the ac wires from any audio cables to pre...
I n p u t s e l e c t v o l u m e c anary a udio ® v a c u u m t u b e p r e a m p l i f i e r handcrafted in california l i n e s ta g e c a - 9 0 6 - l line - 1 line - 2 line - 3 line - 4 line - 5 line - 6 line - 7 mute volume control: adjust the output volume to the desired level. There are 225 a...
R l r l outputs inputs dc power in c anary a udio ® vacuum tube preamplifier l i n e s ta g e c a - 9 0 6 - l m a d e i n u s a line 1 1 2 line 2 line 3 line 4 line 5 line 6 line 7 analog outputs: 2 pair of rca outputs are both active at all time. There is no sonic difference between the two pair of...
Remote control mute pressing this button will silence the output of the ca-906. A second press will exit the mute status. C anary a udio ® using the remote control unit: the infrared remote sensor is located on the front of the ca-906-l. Point the remote control unit at the remote sensor when operat...
Specifications model: ca-906 input impedance: 50,000 ohms min 100,000 ohms max output impedance: 1,200 ohms maximum gain: 10.6 db frequency response: +/- 1 db from 5 hz to 118,000 hz hum and noise: -72 db maximum output voltage before clipping: 45 volts total harmonic distortion: power consumption: ...
Limited warranty canary audio warrants to the original purchaser that each ca-906 dual mono preamplifier is free of manufacturing defects for a period of three (3) years from the date of purchase. To receive this warranty, the original purchaser must complete the enclosed warranty registration card ...
