CANARY AUDIO CD-100 Owner's Manual - Connection Steps:
CONNECTION STEPS:
1. Place the CD-200 in a rack or on a shelf. The CD-200 does not require a
special rack or cabinet for installation.
2. Neatly arrange and organize wiring to and from the preamplifier and all
components. Separate the AC wires from any audio cables to prevent
hum or other unwanted noise from being introduced into the system.
3. Turn off any associated components prior to connecting the CD-200. This
minimizes the chance of momentary electrical surges disturbing your
system.
4. Connect the analog or digital outputs from the back of the CD-200 to the
inputs of your preamplifier or integrated amplifier.
5. With the power switch in the OFF position, attach the power cord to the
CD-200 and connect it to your AC outlet.
6. Press the power button on the CD-200 to switch on the unit. The CD-200
will take approximately 60 seconds to initialize before you will hear any
sound.
7. Power on the rest of your system.
8. Insert a disc into the CD-200 and press the PLAY button.