Summary of CDI 1012
Page 1
User instructions en cdi 1012 dishwasher.
Page 2: Fig. A
3 contents safety advice setting up, installation technical notes for cabinet fitters water softener unit loading the dishes information for test laboratories half load washing loading the detergent and rinse aid cleaning the filters some practical hints routine cleaning and maintenance description ...
Page 3
5 installation (technical notes) important when the appliance is located on a carpet floor, attention must be paid to ensure that there is no obstruction to the bottom vents. Make sure that the plug on the appliance remains accessible after installation. Electrical connection plug your dishwasher in...
Page 4
7 connecting the outlet hose ■ the outlet hose should disharge into a standpipe, making sure that there are no kinks (fig. 4). ■ the standpipe must be at least 40 cm above floor level and it must have an internal diameter of at least 4 cm. ■ it is advisable to fit an anti-odour air trap (fig. 4x). ■...
Page 5
■ fasten the two supplied frames with 4 of the 4 x 16 mm diameter screws, setting them at the center of the eyelets (fig. 6). ■ hang the panel on the dishwasher door and align it by adjusting the frames with the eyelets. ■ fix the frames with the other 6 screws 4x16 mm in the specif holes (fig. 6). ...
Page 6
8f 11 8e 620 min. 9 8a 8b 8c 8d 10 important if, after mounting the wooden panel, it is necessary to ship the machine for final installation, we recommend leaving it in its original packaging materials. For this reason the package was design to allow the panel to be mounted without having to unpack ...
Page 7
Loading the salt ■ on the bottom of the machine there is a container for the salt for regenerating the softener. ■ it is important to use only a salt that is specifically designed for dishwasher. Other types of salt contain small quantities of insoluble particles which over a long period of time may...
Page 8
15 a standard daily load is represented in figs. 1, 2 and 3. Upper basket (fig. 1) a = soup plates b = dinner plates c = dessert plates d = saucers e = cups f = glasses upper basket (fig. 2) a = soup plates b = dinner plates c = dessert plates d = saucers e = cups f = glasses g = single section cutl...
Page 9
17 half load wash upper basket 1/2 mixed load (fig. 1) a = glasses b = soup plates c = dessert plates d = saucers e = saucepan f = irying pan g = large bowl h = small bowl 1/2 load standard (fig. 2) a = 6 glasses b = 6 cups c = serving dish d = 6 soup plates e = 6 dinner plates f = 6 dessert plates ...
Page 10
19 full empty dark light filling the rinse aid container the rinse aid, which is automatically released during the last rinsing cycle, helps the dishes to dry quickly and prevents spots and stains forming. The rinse aid container can be found to the left of the detergent container (fig. A "3"). To o...
Page 11
21 pratical hints how to get really good wash results ■ before placing the dishes in the dishwasher, remove any remaining food (bones, shells, pieces of meat or vegetables, coffee grounds, skin of fruit, cigarette ash, tooth picks etc. To avoid blocking the filters, water outlet and washing arm nozz...
Page 12
22 when cycle is finished after every wash it is essential to turn off water supply and to switch off the machine by pressing the on/off button to the off position. If the machine is not going to be used for some time, it is advisable to follow these rules: 1. Do an empty wash with detergent in orde...
Page 13
24 program selection and special functions (use in conjunction with programme guide) program settings ■ open the door and place dirty dishes inside the appliance. ■ press the "on/off" button . ■ after pressing the "on/off" button, the led for the factory set is "recommended” (which is ideal for full...
Page 14
27 26 5 • •• • • • • • • • 50°c 32 •• 65°c 95 •• • • • • 45°c 140 •• • •• •• •• • • • • • • •• 75°c 120 •• •• •• yes yes programme programme selection check list avarage duration in minutes special function buttons available detergent for soaking (prewash) detergent for washing clean filter check ri...
Page 15
29 n.B.: should any of the situations occur and should the machine give a bad wash performance, it is necessary to remove the deposits from the dishes by hand since the final drying cycle hardens the deposits which a second wash in the machine would not be able to remove. If the malfunction continue...
Page 16
The manufacturer declines all responsibility in the event of any printing mistakes in this booklet. The manufacturer also reserves the right to make appropriate modifications to its products without changing the essential characteristics..
Page 17
04.09 - 41012895 - printed in italy - imprimé en italie en.