Candy PLE 64 Installation Manual

Summary of PLE 64

  • Page 1

    16 17 17 18 18 18 19 19 20 21 22 23 24 24 25 use of cooktop elecrtical plates 25 27 27 28 28 29 16 22 23 4 hotplates gas and mixed.

  • Page 2

    17.

  • Page 3

    18 23.

  • Page 4

    19 23.

  • Page 5

    20

  • Page 6

    21.

  • Page 7: Electrical Connection

    22 electrical connection cable connection should be done by autorited service according to following instructions. • the electrical connection must be made according to the standards and regulations in force. Before making the electrical connection, check the following: is the capacity of the electr...

  • Page 8: Gas And Mixed

    If you have changed the type of gas, it is important to verify the flame stability at the minimum regulation. “gaing access to the by-pass screw” to gain access to hob burner by-pass screws, remove the knobs from the control panel. Never loosen the others screws! 23 • these hobs are delivered with c...

  • Page 9

    24.

  • Page 10

    Use of cooktop electrical plates turn the knob to the position for the required temperature of the hot plate. The indicator light of the hot plate will come on and the hot plate will start to heat. When cooking is completed, turn the knob to the “ o ” position. (figure 2). Do not leave the hot plate...

  • Page 11

    Suitability of cooking pans keep in mind that larger pans have larger heating surfaces. This will help them to cook the food faster than pans with smaller heating surfaces. Always use pan sizes proportionate to the amount of the food to be cooked. In order to prevent splashing, do not use very small...

  • Page 12

    27.

  • Page 13

    28.

  • Page 14

    29.