CanMore GT-750F User Manual - page 5
5
How to replace Lithium-ion Battery
Open the bolt on the bottom cover and take the Li-ion battery out.
Place new Li-ion battery.
The Li-ion battery is replaceable and rechargeable.
The Li-ion battery can last more than 10 hours in continuous operation mode.
Connect to your PC
1) Plug USB cable connector into Notebook USB port
2) Install USB driver, users can find the USB driver on the attached CD (file name: GPS USB driver), the USB driver can be installed for
Microsoft Windows, XP, Vistar. User can easily install USB driver, the USB driver can automatically install the driver when user execute it.
3) Turn on Laptop/PC, please identify which COM port has been used (occupied) by GPS Receiver. The ways how to check COM port has
been used by GPS Receiver Device are as following ; Double clicks
“Control panel ( C )“ Double clicks “System” Click “hardware”
Click
“Hardware Manager” Double clicks “COM Port”, then user can find which COM port has been occupied by GPS Receiver Device.
4) Connect the GPS Receiver Device
and then make sure baud rate set at 38400 bps (The baudrate of production is 38400) in your
application program.
5) Load your GPS mapping or routing software, along with the corresponding maps of the areas that you are occupying or plan to travel.
Start the application. Make sure the application is set for the COM port that your Laptop/PC device will use for serial communication.
Now you should be ready to use your GPS application as directed by the user documentation that came with the software. More
configurations may be necessary.
6) In firstly use of this GPS Receiver device, we strongly recommend you to bring your GPS Receiver device outdoor or open sky at
least 30~45 seconds for sure 3D position fixed and almanac updated.).