CanMore PT-911 User Manual - page 13
###### is new password
max 8 characters.
Set interval for automatic timed
report
W******,002,XXX
XXX is the interval in minute. If
XXX=000 it will stop tracking
Set preset phone number for SOS
button
W******,003,F,P,T
F=0, to turn off this fuction;
F=1, set sending SMS;
F=2, set calling preset phone number;
F=3, set SMS and calling (default)
P=1, set a authorized number for SOS
button
P=2, set a authorized number for 1
button
P=3, set a authorized number for 2
button
P=4, set a authorized number for 3
button
T: Preset phone number. Max. 16
digits
Set over speed alert
When PT-911 speeds higher
than the preset value, it will
send one over speed alert to
the SOS preset number.
W******,005,XX
XX (the preset value of speed)
=00 , to turn off this function
=[01, 20] (unit: 10Km/h)
For example, W000000,005,08, it will
sent alert when it is over 80Km/h
Set Geo-fence alert
When PT-911 moves out of
preset scope, it will send one
Geo-fence SMS to the SOS
preset number.
W******,006,XX
XX ( preset distance to original place )
=00, to turn off this function
=01, 30m
=02, 50m
=03, 100m
=04, 200m
=05, 300m
=06, 500m
=07, 1000m
=08, 2000m
Extend Settings
W******,008,ABCDEFG
A=0, turn off the function of sending
an
SMS location report to the authorized
phone number when it makes a call to
007.
A=1, turn on the function of sending
an
SMS location report to the authorized
phone number when it makes a call to
PT-911.
B=0, reserved
B=1, location data complies with
NMEA 0183 GPRMC protocol.