Summary of E1
Page 1
Wirelesssports earphone forcallsandmusic e1 instruction.
Page 2
Following items are included start here usb cable ear hooks ear cushions.
Page 3
Product overview 1. Multifunction button 2. Volume - / track back 3. Volume + / track forward 4. Led indicator 5. Charge jack 1 2 3 4 5.
Page 4
Charging your new earphone has enough power to pair and make a few calls.It takes 2 hours to fully charge the earphone; while charging, the battery indicator light is red, the indicator light flashes blue once charging is complete. Note: the lifetime of the battery will be significantly reduced if y...
Page 5
Pair one phone 1.Make sure the earphone is turned off and within 1 meter of your phone, press and hold the multifunction button until the led indicator flashes red and blue alternately (about 7 seconds), then release multifunction button. 2.Activate on your phone (see below for more details). Blueto...
Page 6
Bluetooth on search e1 windows phone 8 a. On your phone, open the menu. Settings b. Select . If bluetooth is off, turn it on. Bluetooth the phone will search for new devices automatically..
Page 7
3. Select "e1". If your phone asks, enter 0000 (four zeros) for the passcode or accept the connection. The led indicator stops flashing red and blue once successfully paired, you hear "connection successful". Some phone list an option to "play through earphone", select to use the earphones. Bluetoot...
Page 8
Pair another phone multipoint technology enables you to pair another phone and take a call from either. To pair with another mobile phone, follow the steps for "pair one phone". After pairing successfully, restart the earphone to connect to 2 paired mobile phone automatically. Bluetooth on connect e...
Page 9
Call answer a call press the multifunction button or volume "+" or volume "-" once. Reject a call press and hold the multifunction button for about 2 seconds. Press the multifunction button once. End a call reject the new call hold the current call during the call there is a new call, press the mult...
Page 10
Redial the last call mute on/off double-press the multifunction button in standby mode. The mobile phone will redial the last call number. Press the volume "-" for about 2 seconds to mute on/off. Voice dial (need phone support) in standby mode press the multifunction button about 2 seconds,wait for ...
Page 11
Music music play / pause press multifunction button once to play / pause music. (some phones may require you to start a media player first) . Track back/forward press the volume "-" for 2 seconds once to skip track backward, press volume "+" for 2 seconds once to skip track forward. Switch music and...
Page 12
Basic operation status indicator instruction power on power off standby incoming call pairing led status stay blue about one second stay red about two second blink blue once every 5 seconds flashes blue quickly flashes red and blue alternately voice prompts power on power off pairing / toot battery ...
Page 13
Hard reset if the earphone cannot be turned on even when fully charged or does not respond during use, follow the instructions below to reset it. 1.While pressing and holding the multifunction button, connect the earphoneto your pc’s usb port or a usb power adapter with the charging cable. 2.Keep pr...
Page 14
Do not use earphone in thunderstorm weather, the earphone may not work properly in the condition, and increase the risk of being hit by lightning . Safety and care using earphone at high to moderate volumes for extended periods of time will result in permanent hearing damage .It is advised you keep ...