1. DL manuals
  2. CANNICE
  3. Headphone
  4. Headblue 1
  5. Instruction

CANNICE Headblue 1 Instruction

Manual is about: Smart HiFi wireless headphone with touch control

Summary of Headblue 1

  • Page 1

    Smart hifi wireless headphone with touch control headblue 1 instruction.

  • Page 2

    Following items are included start here usb cable.

  • Page 3

    1 2 3 4 5 6 7 8 1.Volume down 2.Volume up 3.Eq button 4.Multifunction button 5.Trackback 6.Trackforward 7.Led indicator 8.Microphone 9.Charger connector 9 product overview.

  • Page 4

    Basic operation adjust the volume led indicator and voice prompts instruction power on power off pairing standby incoming call battery low led status flashes blue twice flashes red once flashes red and blue alternately flashes blue once every 8 seconds flashes blue continuously flashes red twice eve...

  • Page 5

    Pair one phone 1. Press and hold the multifunction button for about 5 seconds, the led indicator flashes red and blue, you hear voice prompt tone from low to high. 2. Activate the bluetooth feature on your phone, and set it to search for new bluetooth devices. Pairing bluetooth on search.

  • Page 6

    3. Select “headblue1”. If you phone asks, enter 0000 (four zeros) for the passcode or accept the connection. The led indicator stops flashing red and blue once successfully paired. Note:when the headphone and phone have been paired once, they will automatically connect when the headphone is on and b...

  • Page 7

    Pair another phone multipoint technology enables you to pair another phone and take a call from either. To pair with another mobile phone, follow the steps for “pair one phone”. After pairing successfully, restart the headphone to connect to 2 paired mobile phone automatically. Bluetooth on connect ...

  • Page 8

    Call answer a call press the multifunction button once. When call rings,the led indicator flashes blue continuously, you hear voice prompt of continuous tone. End a call press the multifunction button once. Reject a call press the multifunction button for 2 seconds. When call rings,the led indicator...

  • Page 9

    (need media player support) music music play / pause press multifunction button to play / pause music. (some phones may require you to start a media player first), you hear "toot" once. Trackback press " trackforward press ">>" button to skip track forward, you hear "toot" once. Fast forward press a...

  • Page 10

    Rewind press and hold “ want to resume normal playback, release the “ switch music and calls when a call rings during a music playing, the music automatically pauses to allow you to answer or ignore the call. Once the call is ignored or ends, the music is resumed. Eq setting press the eq button to c...

  • Page 11

    More features battery indicator the current battery status of headphone will be displayed in top right corner after the headphone connected to ios devices. Voice dial (need phone support.) press the multifunction button for 2 seconds, you hear "toot", wait for phone prompt and then tell the phone to...

  • Page 12

    Listen music via usb cable 1. Connect the headset to a usb slot of pc using the supplied micro-usb cable. 2. The driver may need to be installed for the first time, after the driver installed successfully, sets “headphones csr8645” as default playback device (refer to computer os instruction). 3. Tu...

  • Page 13

    Charging your new headphone has enough power to pair and make a few calls. When battery is low, you will hear the warning tone. It takes 2.5 hours to fully charge the headphone. While charging, the battery indicator light is red, the indicator light flashes blue once charging is complete. Note: the ...

  • Page 14

    Clear paired list turn off the headphone, press and hold the multifunction button and eq button simultaneously, then connect the headphone to a usb charger or usb port of computer, led indicator flashes red, release multifunction button and eq button after 4 seconds, paired list is cleared. Hardware...