1. DL manuals
  2. Cannon
  3. Indoor Fireplace
  4. Canterburry
  5. Installation Instructions Manual

Cannon Canterburry Installation Instructions Manual

Summary of Canterburry

  • Page 1

    Canterbury inbuilt models installation part no: f2663 revision j -march 2010 cannon cannon this heater is approved for use with read these instructions in conjunction gmk10025 as4553:2008 natural or propane gases. Installation instructions for fitment into a combustible enclosure to suit mock firepl...

  • Page 2

    Contents item page. Page 9. Pag general e 1 p mock fireplace enclosure recommendations age 2 mock cavity dimensions - canterbury age 3 p overall dimensions of heater cabinet page 4 fitment of spacer brackets and blanket page 5 installation into wall cavity - mockkitra method a page 6 & 7 p installat...

  • Page 3

    Install blanket general page 1. Installation into a combustible enclosure mockkitro ( single skin flue ) method b page 8. Fig 7. 600 mm between top of cowl and nearest part of roof flue cowl approved to ag604 flue clamp flashing roof cladding r e aft rs provide clearance around ceiling joists mock e...

  • Page 4

    Stud stud c.L. Of heater 345 mm to 610 mm flue opening gas inlet 325 mm 245 mm 44 mm 30 mm 540 mm flue opening detail method a 600 mm min between top of cowl and nearest part of roof 75 mm main stud wall adjustment strap header twin skin flue top plate flue support flue adapter flashing flue clamp f...

  • Page 5

    Page 6. Page 3. Installation into wall cavity. ( twin skin flue ) method a method. Mock cavity dimensions - canterbury height 630 mm to 640mm w m idth 730m m to 750 m clearance from combustibles. Fig 2. Depth of cavity = heater + adaptor + flue clearance min 450 mm = 300mm + 125mm + 25mm max 505 mm ...

  • Page 6

    Overall dimensions of the heater cabinet (see fig 3 and 4. ) fitment of spacer brackets and blanket 735mm fig 4. Fig 3. Page 5. Page 4. * height 620 mm (including spacers) * width 735 mm (including spacers) * depth 330 mm (including spacers) * depth (when flue spigot engaged) 425 mm 620 mm 330mm 425...