Cannon FITZPIBPWR User Instructions

Manual is about: FITZROY PROFILE INBUILT

Summary of FITZPIBPWR

  • Page 1

    Cannon fitzroy profile inbuilt power flue user instructions the heater is approved for use with natural gas. Please leave all instructions with the owner. Inbuilt model fitzpibpwr makers warranty approved design australian gas association.

  • Page 3: Contents

    Contents warranty contents 2 safety warnings what to do if you smell gas warnings standards user instructions operating instructions cleaning heater specifications 3 4-5 6-8 9-10 page 2..

  • Page 4: Warranty

    Warranty the cannon appliance is warranted against defects in materials and workmanship for a period of one (1) year from the date of original purchase, for residential use in australia. Warranty service, which includes parts and labour for the replacement or repair of defective parts, is available ...

  • Page 5: Safety Warnings

    Safety warnings please read this manual before using this heater. What to do if you smell gas. Warnings. 1. Turn off the main gas supply. 2. Extinguish any open flame. 3. Open windows. 4. Do not touch electrical switches. 5. Do not use your telephone. 6. Call your gas supplier immediately from your ...

  • Page 6: Safety Warnings

    10. The heater must be installed with it’s integral flue correctly installed for this heater to operate properly, if not correctly installed and maintained venting system can result in carbon monoxide (co) poisoning and possible death. 11. The appliance should be inspected prior to use, with regular...

  • Page 7: User Instructions

    User instructions operating instructions. 1. Plug the power cord into the wall socket and turn on the power to the heater, see fig 1. Refrain from using an extension cord. 2. For control layout refer to fig 2. Burner low power off switch 4 burner high switch 3 fan low / power on switch 2 fan med swi...

  • Page 8: User Instructions

    User instructions operating instructions. 6. To increase the fan speed to high, press switch for high setting. Refer figure 6. 7. To turn the burner to low setting, press switch for low setting. Refer figure 7. On low burner setting it is more efficient tooperate the fan speed on low. 8. If the burn...

  • Page 9: User Instructions

    Cleaning all cleaning should be carried out when the heater is cold. Normally the heater should only need wiping with a lint free damp cloth. Any stubborn stains can be removed with a non-abrasive spray on cleaner. If an abrasive cleaner is used the paint finish will be damaged. Internally the heate...

  • Page 10: Heater Specifications

    Heater specifications do not use fire with broken or missing logs. Gas type : energy star rating : gas consumption : energy output : heater type : operating pressure : gas regulator : min inlet pressure : fan : controller : min cavity dimensions : (for installation into a masonry/brick fireplace) po...

  • Page 11: Notes

    Notes page 10..

  • Page 12: Notes

    Authorised service agents. For further information or spare parts contact the cannon distributor in your state. Sampford & staff pty ltd 421 smith street fitzroy,vic, 3065 vic/tas (03) 9418 5800 nsw (02) 9331 8888 sa/nt (08) 8212 7000 qld (07) 3358 3000 wa (08) 9242 5333 act (02) 6280 4177 elsewhere...