Westminster use and installation instructions the cooker must be installed in accordance with the regulations in force and only used in a well ventilated space. Read these instructions prior to using the cooker and retain them for future reference. Part no. 4466200024-01.
Contents page introduction 3 for your safety 4 timer operation 6 hotplate 12 grill 14 oven 15 oven cooking chart 18 care and cleaning 20 something wrong with your cooker? 22 installation instructions 25 service information back cover contents 2.
To help you make the best use of your cooker, please read this booklet carefully. Your new cooker is guaranteed and will give lasting service. The guarantee is only applicable if the cooker has been installed in accordance with the installation instructions. The cooker is designed specifically for d...
Please read the precautions below before using your cooker. Always make sure you understand the controls before using the cooker. Always check that all controls on the cooker are turned off after use. Always stand back when opening oven door to allow heat to disperse. Always use dry, good quality ov...
Never leave children unsupervised where the cooker is installed as all surfaces will get hot during and after use. Never allow anyone to sit or stand on any part of the cooker. Never store items that children may attempt to reach above the cooker. Never heat up unopened food containers as pressure c...
6 the timer offers you the following features: 1. Time of day 2. Automatic cooking 3. Minute minder automatic cooking the oven can be controlled automatically. Guidance on automatic cooking 1. Select foods which will take the same time to cook. 2. Set the oven timer so that the food has just finishe...
7 know your timer clockface the timer incorporates a 24 hour clock. Ensure the correct time of day is always set, before using your cooker. Symbols a ‘bell’ symbol will light up when you select a minute minder period and will remain lit for the period set. At the end of the minute minder period, the...
8 oven timer operation setting the time of day step 1 make sure all oven controls are turned off. Step 2 check the electricity supply to the cooker is turned on. Step 3 when switched on the display will show 0.00 and the auto symbol, flashing intermittently. Step 4 press & hold in both the cook peri...
9 oven timer operation step 3 press and hold in the cook period button. The display will read 0.00 with the ‘cookpot’ symbol lit. Step 4 with the cook period button still held in, set the required cook period using the “+” and “–” buttons. Release the buttons and the timer display will revert to the...
10 oven timer operation step 4 press & hold in the cook period button, the display will read 0.00 and the ‘cookpot’ symbol will light up. With the cook period button still held in set the required cook period using the “+” and “–” buttons. Example: 1hr 30 minutes (as shown). Note: cook period is the...
11 oven timer operation other notes on timer operation 1. When cooking automatically the cook period can be checked at any time simply by pressing the cook period button. 2. When cooking automatically the end time can be checked at any time by simply pressing the end time button. 3. Having set a coo...
12 hotplate the hotplate has two high speed burners and two simmering burners which will accommodate pans between 100mm (4”) and 230mm (9”) diameter. All pans should be positioned centrally over the burners. Simmering aids such as steel plates should not be used because they can cause damage to the ...
13 hotplate safety requirements for deep fat frying 1. Never fill chip pans more than one third full with oil or fat. 2. Never leave oil or fat unattended during the heating or cooling period. 3. Never heat fat or fry with a lid on the pan. 4. Always dry food thoroughly before frying, and lower it s...
Plate rack a plate rack can be obtained as an optional extra from your local cannon spares centre. (see back cover) fitting instructions are supplied with the plate rack. 14 grill the high level grill is fitted with a grill pan carrier that provides two grilling levels. The grill pan can be pulled o...
The oven has different heat zones – the thermostat settings refer to the temperature on the middle shelf position; above this shelf it is hotter and below it is cooler. Two shelves provide five possible cooking levels enabling full use of the different temperatures inside the oven. Each shelf has a ...
Cold start cooking anything requiring long slow cooking such as casseroles and rich fruit cakes can be put into a cold oven. Satisfactory results can also be obtained with creamed mixture, rich pastries or yeast mixtures, but for perfection we recommend preheating the oven for about 15 minutes at th...
The ‘slow cook’ setting on the main oven thermostat is used for slow cooking, keeping food warm and warming plates for short periods. Using the ‘slow cook’ setting for slow cooking 1. All dishes cooked by the ‘slow cook’ setting should be cooked for a minimum 6 hours. They will ‘hold’ at this settin...
The following times and setting are for guidance only. You may wish to alter the setting to give a result more to your satisfaction. When a different setting to that shown below is given in a recipe, the recipe instructions should be followed. Allow 15 minutes preheat for best results. Always turn t...
When baking with two trays or tins on two levels, the top tray is removed first and the lower tray moved up to the top position for a few minutes longer. Soft margarine – use the oven settings recommended by the margarine manufacturer and not those indicated on the cooking chart. 19 oven cooking cha...
20 care and cleaning switch off the electricity supply before cleaning the cooker. Clean the cooker regularly and wipe up spills after they occur to prevent them from becoming burnt on. Never use biological washing powder, caustic cleaners harsh abrasives, scouring pads, steam cleaners, aerosol clea...
21 care and cleaning cooker part and finish vitreous enamel grill top, splash back, control panel, hotplate, pan supports, burner caps, roasting tin, grill pan, oven base, inside of the oven door paint grill side panels, grill fascia, door handles, oven door sides, splash back side trims, side panel...
22 something wrong with your cooker problem before contacting your service centre or installer, check the problem guide below, there may be nothing wrong with your cooker. Check ignition does not work. Burner ports ignitor burner ports ignitor ignitor burner ports oven burner grill burner hotplate b...
Something wrong with your cooker problem check oven does not work, but the grill and hotplate burners do work. Ensure that the timer is set to the correct time of day. Ensure that the timer is set to manual mode by pressing the ‘manual’ button until the ‘auto’ symbol is off. Slight odour or small am...
Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment conditions are compatible. The adjustment conditions for this appliance are stated on the data badge which is fitted on the back panel. This appliance is not designed to be co...
Technical data dimensions height 1460mm width 538mm depth 590mm excluding handles height to hotplate 900mm general gas connection rp 1 / 2 ( 1 / 2 ” bsp female) pressure test point grill injector gas rate adjustment none aeration adjustment none electrical connection flexible cord fitted with a 3 pi...
26 space for fixing the cooker can be close fitted below hotplate level. This requires a minimum distance of 540mm between cupboard units of hotplate height. Cupboards or walls to the side of the cooker must be 125mm away wall cupboards above hotplate level must also be 125mm away as shown where cup...
Unpacking the cooker unpack the components. Check that the following parts are present. Grill pan, grid & grill pan carrier pan supports (4) baking dish main oven shelves (2) enamelled burner caps (4) literature aluminium burner bodies (4) levelling two rear wheels and two front feet are fitted whic...
28 fit grill pan carrier 1. Carefully locate the grill pan carrier under the grill canopy at the front. Do not engage it in the slot. 2. Support the carrier, swing it upwards at the rear and locate it in the holes in the splashback. 3. Locate the front pegs of the carrier into the slots at the front...
29 connecting to gas supply connection to the appliance should be made with an approved appliance flexible connection to bs 669. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor. Lpg models should be ...
Connection to the electricity supply should be made via a properly earthed, readily accessible wall socket which is adjacent to but not directly above, and not more than 1.25m away from the appliance and capable of electrical isolation. The mains lead should be routed such that it cannot touch hot p...
31 installation and operational checks after installation, check for gas soundness. The supply pressure can be checked at the grill injector. Access to the injector is by first removing the grill rear panel (4 screws) and the left hand side panel (2 screws). Then remove the 2 fastening screws on the...
Key contacts service cannon has the largest appliance manufacturer’s service team in europe, trained specialists directly employed by us to ensure your complete confidence. Repair service uk: 08709 066 066 republic of ireland: 1850 302 200 you will be asked for the following information:- name, addr...