1. DL manuals
  2. Cannondale
  3. Bicycle
  4. Kinneto E-Series
  5. Owners Manul

Cannondale Kinneto E-Series Owners Manul

Summary of Kinneto E-Series

  • Page 1

    Kinneto owner’s man ual supplem ent cannondale e urope cycling sports group europe , b.V. Hanzepoort 27 , 7570 gc, oldenz aal, netherlands (voice): +41 61 48 79380 (fax): +31 5415 142 40 servicedeskeurope@c yclingsportsgroup.Com cannondale uk cycling sports group vantage way, the f ulcrum, poole, do...

  • Page 2: About This Supplement

    1 132747 (12/14) e-series owner’s manual supplement english about this supplement cannondale owner’s manual supplements provide important model specific safety, maintenance, and technical information. They are not replacements for your cannondale bicycle owner’s manual. This supplement may be one of...

  • Page 3: Safety Information

    2 safety information warning **intended use: this bicycle is intended to be used as a commuter bicycle. This bike complies with the requirements of european standard en 15194, electrically power assisted cycles. The drive assist system is limited to a maximum continuous power rating of 0,25 kw (250 ...

  • Page 4: Read The Drive System

    3 e-series owner’s manual supplement english read the drive system manufacturer’s instructions warning manufacturer’s instructions -in addition to this supplement, you must read and follow the manufacturer’s instructions for all components of the drive assist system. These instructions contain corre...

  • Page 5: Kinetto Rigid

    4 1 2 2 3 9 4 4 5 5 6 7 kinetto rigid kinetto womens parts of the e-series 1 drive assist display 2 drive motor 3 drive control 4 sensor/spoke magnet 6 battery 7 lefty rigid 8 lefty wheel hub 9 bell.

  • Page 6: Lefty Rigid

    5 3 1 lefty rigid e-series owner’s manual supplement english wheel removal 1. See figure 1. Use a 5 mm allen key to loosen the brake caliper mounting bolts enought to remove the brake caliper from the mounting tabs. Note brake alignment shims between brake bosses and the caliper. Replace correctly d...

  • Page 7: Maintenance

    6 the following table lists only supplemental maintenance items. Please consult your cannondale bicycle owner’s manual for more information on basic bike maintenance. Consult with your cannondale dealer to create a complete maintenance program for your riding style, components, and conditions of use...

  • Page 8: Cleaning

    7 e-series owner’s manual supplement english cleaning when cleaning your bike, use a damp sponge or a soft brush with only a mild soap and water solution. Rinse the sponge often. Do not spray water. Notice do not use a pressure washer or dry with compressed air. This will force contaminants into sea...

  • Page 9: Geometry

    8 z i e g d j a b n l k h p o serial geometry a - seat tube length b - top tube horizontal d - head tube angle e - seat tube angle g - head tube length h - wheelbase i - front center j - chain stay length k - bottom bracket drop l - bottom bracket height m - fork rake o - stack p - reach z - crown h...

  • Page 10: User’S Manual

    9 um-70h0a-001-00 user’s manual e6000 series english contents important notice ............................................................................................... 10 important safety information ............................................................................... 10 to ensure ...

  • Page 11: Important Notice

    10 shimano total electric power system 5 user's manuals in other languages are available at : http://si.Shimano.Com important notice • contact the place of purchase or a bicycle dealer for information on installation and adjustment of the products which are not found in the user's manual. A dealer's...

  • Page 12: User’S Manual

    11 um-70h0a-001-00 user’s manual e6000 series english 6 handling the battery • if any liquid leaking from the battery gets into your eyes, immediately wash the affected area thoroughly with clean water such as tap water without rubbing your eyes, and seek medical advice immediately. If this is not d...

  • Page 13

    12 shimano total electric power system 7 handling the battery • when you carry a power-assisted bicycle in a car, remove the battery from the bicycle and place the bicycle on a stable surface in the car. • when attaching the battery, check that no water has accumulated on the connector to the batter...

  • Page 14: User’S Manual

    13 um-70h0a-001-00 user’s manual e6000 series english 8 features of shimano steps features • lightweight, compact design • silent, smooth ride • high shifting performance system (in the case of electronic gear shifting) this system enables you to shift gears by providing the most appropriate level o...

  • Page 15: Names of Parts

    14 shimano total electric power system 9 names of parts shifting > a shifting switch sw-e6000 b motor unit mu-s705 internal geared hub sg-c6060 sg-s705 sg-s505 motor unit internal geared hub 8 b 1 2 3 5 6 a b 4 7 6 7 1 cycle computer sc-e6000 5 speed sensor 2 assist switch sw-e6000 6 battery bt-e600...

  • Page 16: User’S Manual

    15 um-70h0a-001-00 user’s manual e6000 series english 10 specifications operating temperature range: during discharge -10 – 50˚c nominal capacity 11.6 ah operating temperature range: during charging 0 – 40˚c rated voltage 36 v dc storage temperature -20 – 70˚c drive unit type midship storage tempera...

  • Page 17: Method of Use

    16 shimano total electric power system 11 method of use charging the battery 1. Attach the charger plug to the charger connector of the battery. Insert it with the groove side of the connector facing up. * you cannot insert it with the groove side facing down. Danger • use the battery and charger co...

  • Page 18: User’S Manual

    17 um-70h0a-001-00 user’s manual e6000 series english 12 battery level indicator charging-in-progress indication battery level indicator*1 battery level 0% - 20% 21% - 40% 41% - 60% 61% - 80% 81% - 99% 100% *1 : no light : lights up : flashing battery level indication battery level indicator*1 batte...

  • Page 19

    18 shimano total electric power system 13 installing / removing the battery how to use the key the following description may not be applicable as different types of keys are available. 1. Insert the key into the key cylinder in the battery holder. • the position of the key does not affect the insert...

  • Page 20: User’S Manual

    19 um-70h0a-001-00 user’s manual e6000 series english 14 removing the battery turn off the power, then turn the key to the unlocking position, and pull out the battery. You can remove the battery only when the key is in the unlocking position. Turn off the battery then turn the key to the unlocking ...

  • Page 21

    20 shimano total electric power system 15 1. Align the indentation in the bottom of the battery with the protrusion on the holder and insert the battery. 2. Slide the battery to the right starting from the point where it is inserted. Push in the battery until you hear it click. 3. Return the key to ...

  • Page 22: User’S Manual

    21 um-70h0a-001-00 user’s manual e6000 series english 16 switching modes x changing the cycle computer display y when switching assist modes: the level of assistance becomes stronger when shifting gears: pedaling becomes heavier z when switching assist modes: the level of assistance becomes weaker w...

  • Page 23: Changing Settings

    22 shimano total electric power system 17 changing settings operating the cycle computer you can operate the display of the cycle computer by using the x, y, and z buttons on the right and left assist switches. Assist shift assist mode switching gear shifting x x y y z z the operation procedure prov...

  • Page 24: User’S Manual

    23 um-70h0a-001-00 user’s manual e6000 series english 18 basic screen display displays the status of the power assisted bicycle, traveling data. 1 3 2 4 1. Current speed displays the current speed. 2. Current time shows the current time. 3. Battery charge displays the current battery level in six le...

  • Page 25

    24 shimano total electric power system 19 5 5. Changing the assist mode display press assist-y or assist-z on the assist switch to switch assist modes. Display details assist high assist normal assist eco assist off walk assist assist shift assist assist when the speed indicator is "0", pressing the...

  • Page 26: User’S Manual

    25 um-70h0a-001-00 user’s manual e6000 series english 20 • if the bicycle does not move after the walk assist function turns on, the function automatically stops. To restart the walk assist function, release the assist switch and press and hold down assist-z again. • the walk assist function can ope...

  • Page 27

    26 shimano total electric power system 21 6 6. Gear position and traveling data display displays the current gear ratio or traveling data. The type of traveling data displayed changes each time you tap assist-x. Display details gear position (displayed only when the motor unit is connected) gear pos...

  • Page 28: User’S Manual

    27 um-70h0a-001-00 user’s manual e6000 series english 22 turning the battery-powered light on or off when the battery-powered light is connected, pressing the assist-x for 2 seconds displays this information instead of the clock and assist mode. The light turns on and off each time it is displayed. ...

  • Page 29

    28 shimano total electric power system 23 launching and exiting the setting menu launching 1. With the bicycle stopped, pressing both the assist-y and assist-z at the same time for 2 seconds displays the setting screen. Assist shift 2 sec. 2. Press the assist-y or assist-z to move the cursor to the ...

  • Page 30: User’S Manual

    29 um-70h0a-001-00 user’s manual e6000 series english 24 changing the settings language setting (language) configure the language setting. 1. Press the assist-y or assist-z to move the cursor to the item you want to configure. Item english français deutsch nederlands italiano español assist shift 2....

  • Page 31

    30 shimano total electric power system 25 beep setting (beep) configure the beep setting. 1. Press the assist-y or assist-z to move the cursor to the item you want to configure. Item details on enable beeps by operation off disable beeps by operation assist shift 2. Pressing the assist-x enables the...

  • Page 32: User’S Manual

    31 um-70h0a-001-00 user’s manual e6000 series english 26 start mode setting (start mode) sets the start gear when using start mode function. 1. Press the assist-y or assist-z to move the cursor to the item you want to configure. Item details off no setting 2 2-speed 3 3-speed 4 4-speed 5 5-speed ass...

  • Page 33

    32 shimano total electric power system 27 3. Press the assist-y or assist-z to set the minutes. Assist shift 4. Pressing the assist-x enables the set value and takes you back to the "setting menu" screen. You can change the numbers quickly by holding down the assist-y or assist-z. Assist shift clear...

  • Page 34: User’S Manual

    33 um-70h0a-001-00 user’s manual e6000 series english 28 connection and communication with the pc downloading application you need e-tube project to configure shimano steps and update firmware. Download an e-tube project from the support website (http://e-tubeproject.Shimano.Com). For information on...

  • Page 35: Troubleshooting

    34 shimano total electric power system 29 troubleshooting battery level and error indication error indication type indication condition lighting pattern *1 recovery system error communication error with the bicycle system make sure that the cable is not loose or improperly connected. If the situatio...

  • Page 36: User’S Manual

    35 um-70h0a-001-00 user’s manual e6000 series english 30 error messages on the cycle computer warning this disappears if the error is fixed. A message appears instead of the clock indication. List of warnings code situation where the error occurred condition for removing the operational restriction ...

  • Page 37

    36 shimano total electric power system 31 error if an error message is displayed on the entire screen, follow one of the procedures below to reset the display. • press the power switch of the battery. • remove the battery from the holder. If resetting the battery power does not solve the problem or ...

  • Page 38: User’S Manual

    37 um-70h0a-001-00 user’s manual e6000 series english 32 troubleshooting assist function symptom cause / possibility remedy assistance is not being provided. Is the battery sufficiently charged? Check the battery charge. If the battery is nearly spent, recharge it. Are you riding on long slopes in s...

  • Page 39

    38 shimano total electric power system 33 battery symptom cause / possibility remedy all the five battery level indicators stay on. The battery level indicators do not show battery levels when the battery is connected to the bicycle. Battery levels are shown during charging. It is not a sign of a ma...

  • Page 40: User’S Manual

    39 um-70h0a-001-00 user’s manual e6000 series english 34 lights symptom cause / possibility remedy the front light or the tail light does not illuminate even when the switch is pressed. The e-tube project settings may be wrong. Contact the place of purchase. Cycle computer symptom cause / possibilit...

  • Page 41: Key  Number

    40 shimano total electric power system please note: specifications are subject to change for improvement without notice. (english) © may 2014 by shimano inc. Htr key number the number that is attached to the key is needed in case you need to purchase spare keys. Make a note of the in the following b...

  • Page 42: Kinneto

    Kinneto owner’s man ual supplem ent cannondale e urope cycling sports group europe , b.V. Hanzepoort 27 , 7570 gc, oldenz aal, netherlands (voice): +41 61 48 79380 (fax): +31 5415 142 40 servicedeskeurope@c yclingsportsgroup.Com cannondale uk cycling sports group vantage way, the f ulcrum, poole, do...