Cannondale SCALPEL 100 SCALPEL 100 Owner's Manual Supplement

Manual is about: Cannondale Bicycle User Manual

Summary of SCALPEL 100 SCALPEL 100

  • Page 1

    Read this manual carefully! It contains important safety information. Keep it for future reference. Please note that the specifications and information in this manual are subject to change for product improvement. For the latest product information, go to http://www.Cannondale. Com/tech/. Scalpel 10...

  • Page 2: Safety

    Safety information about this supplement cannondale owner’s manual supplements provide important model specific safety, maintenance, and technical information. They are not replacements for your cannondale bicycle owner’s manual. This supplement may be one of several for your bike. Be sure to obtain...

  • Page 3: Intended Use

    10871.Pdf intended use scalpel 100 is intended for condition 3 (cross-country, marathon) riding. Condition 3 symbol shown in figure 2. For riding on unimproved trails with small obstacles figure 2. Condition 3 riding includes conditions 1 and 2, plus rough trails, small obstacles, and smooth technic...

  • Page 4: Building Up A Frameset

    Building up a frameset before building up a frameset, consult with your cannondale dealer and the component manufacturers, and discuss your riding style, ability, weight, and interest in and patience for maintenance. Make sure the components chosen are compatible with your bike and intended for your...

  • Page 5: Inspection & Crash

    10871.Pdf inspection & crash damage of carbon frames warning after a crash or impact: inspect frame carefully for damage (see part ii, section d. Inspect for safety in your cannondale bicycle owner’s manual.) do not ride your bike if you see any sign of damage, such as broken, splintered, or delamin...

  • Page 6: Tire Size

    Tire size warning observe the “maximum tire width” for your bike found in the specifications page of this manual. Mounting the wrong size tires can result in the tires hitting the fork or frame when riding. If this happens, you can lose control of your bike and you can be thrown off, a moving tire c...

  • Page 7: Maximum Fork Length (500Mm)

    10871.Pdf 7 headtube headset parts or adapters axle maximum fork length 500 mm maximum fork length (500mm) maximum fork length is an important frame safety testing specification. You must observe the measurement when installing headset parts, headset adapters, installing and adjusting a fork, and se...

  • Page 8: Frame Information

    8 frame information 1. 12. 15. 14. 13. 16. 17. 18. 20. 19. 6. 7. 8. 2. 9. 10. 11. 5. 4. 3. Identification 1. Top tube 2. Top tube shock mount 3. Head tube 4. Integrated bearing cup 5. Downtube 6. Bottom bracket shell 7. Seat tube 8. Rear shock 9. Seat tube shock mount 10. Shock link assembly 11. Sea...

  • Page 9: Integrated Head Tube

    10871.Pdf headshok 1 ⅛ “ kp058/ hd169/ qsiseal/ (adapters w/ headset) integrated head tube in both alloy and carbon frame models, the si bearing cups are intergrated within the head tube. In alloy frames, the cups are machined in the head tube. In carbon models, cups are permanently bonded into the ...

  • Page 10: Bearing Maintenance

    10 si bb30 crankset compatability the bb shell is compatable with the bb30 standard. See http://www.Bb30standard.Com/ for information see si cranksets owner’s manual supplement. See http://www.Cannondale.Com/ tech/. Bearing maintenance shell bearings (kb6180/) are sealed cartridge type and do not re...

  • Page 11

    10871.Pdf 11 kb6180/ kt011/ kt010/ loc tite 609 (g reen) kf365/ groove drive side qc616/ kt013/ 8mm.

  • Page 12: Rear Shock

    1 rear shock the scalpel is a unique suspension design. The living hinge seat and chainstays work in conjunction with the rear shock and provide some of the spring rate. This integrated spring force results in riders requiring much less air pressure than normal. The key is to set sag @ 8-10mm. The e...

  • Page 13

    10871.Pdf 1 shock link tightening torques 5mm allen 13 nm, 115 in lbs 4mm allen 7 nm, 62 in lbs loctite 242 (blue) 4mm allen 7 nm, 62 in lbs loctite 242 (blue) 5mm allen 13 nm, 115 in lbs 4mm allen 7 nm, 62 in lbs loctite 242 (blue).

  • Page 14: Shock Link Parts

    1 shock link parts 121559 121549 a e 117165 h 117165 h 135s i 121559 e 116963 l 121563 k 121559 e 121648 b 121648 b 121564 j 121562 d 121560 c 121648 b 117165 h 121647 g 121559 e 121561 f 121561 f 135s i 121648 b 121560 c 121562 d front shock mounting hardware order kit item (qty) kp050/ shock mount...

  • Page 15: Cable Routing

    10871.Pdf 1 kp057/ cable routing route rear brake line and rear derailluer cable above the rear shock between the top tube mount as shown. Locate guides kp057/ in the postions indicated as rear brake line and rear derailluer cable pass through the through the shock mount..

  • Page 16: Frame Guards

    1 frame guards normal line and cable movement against the frame can wear away painted finishes and decals. Overtime, cable rubbing can wear into the frame itself causing very serious frame damage. Kf103/ (8 pcs) to apply the guard material : 1. Clean the frame with a mild detergent and wipe dry with...

  • Page 17: Right Chainstay Protector

    10871.Pdf 17 2. 1. 3. Kp054/ kp053/ includes items 1. And 2. Right chainstay protector the clear film adhesive chainstay protector (1) protects the right chainstay from contact with the chain. The protector is replaceable. Check the condition of the chainstay protector before each ride. Replace it i...

  • Page 18: Front Derailleur Cable

    18 front derailleur cable guide this snap in front derailleur cable guide is mounted under the bottom bracket shell. Kf085/ guides and cable stops lines and cables on your bike are routed through frame guides using cable stops (1) and /or cable thru guides (2). Periodically, you should check to make...

  • Page 19: Rear Derailleur Hanger

    10871.Pdf 1 1.1 n•m, 10 in•lbs loctite 242 (blue) kh048/ 2.5 mm appy a film of greas e here rear derailleur hanger before re- installing (same or new): clean dropout and inspect carefully for any cracks or damage. Clean surfaces and apply a light film of bike grease to the dropout to minimize any no...

  • Page 20: Schedule

    0 maintenance the following table lists only supplemental maintenance items. Please consult your cannondale bicycle owner’s manual for more information on basic bike maintenance. Consult with your cannondale dealer to create a complete maintenance program for your riding style, components, and condi...

  • Page 21: Cleaning

    10871.Pdf 1 cleaning use only a mild soap and water solution. Clean water and a common dish washing liquid will work best. Cover sensitive areas with a clean plastic bag. Secured temporarily with a rubber band or masking tape, a bag can prevent water damage to various bike components (bearings, seal...

  • Page 22

    Geometry/specification stl e k h f i l b c j a g stl e k h f i l b c j a g stl e k h f i l b c a g j geometry scalpel 100 scalpel 100 fÉminine (cm / in) size small medium large x-large petite small medium seat tube length stl 40.5/15.9 43.0/16.9 48.0/18.9 50.0/19.7 40.5/15.9 40.5/15.9 41.5/16.3 top ...

  • Page 23

    10871.Pdf replacement parts order frame kp048/ kit,der.Hanger;single sided 3 kp051/ kit,link,hware,scalpel 100 kp052/ kit,link assy,scalpel 100 kp053/ kit,ch.Stay protect-scalpel 100 kp054/ kit,guard,scuffguard,downtube kf103/ kit, guard,scuffguard-8pk kf014/ kit,cable stop inserts-2 kf086/ kit,guid...

  • Page 24

    Owner notes record maintenance history, service, or set up information . Date work performed.