1. DL manuals
  2. Cannondale
  3. Bicycle
  4. Slice Carbon
  5. Owner's Manual Supplement

Cannondale Slice Carbon Owner's Manual Supplement

Other manuals for Slice Carbon: Owner's Manual

Summary of Slice Carbon

  • Page 1

    Read this manual carefully! It contains important safety information. Keep it for future reference. Slice carbon owner’s manual supplement 120849.Pdf safety information ............................... 1 about this supplement .......................... 2 important composites message .......... 3 inte...

  • Page 2: Safety

    Safety information about this supplement cannondale owner’s manual supplements provide important model specific safety, maintenance, and technical information. They are not replacements for your cannondale bicycle owner’s manual. This supplement may be one of several for your bike. Be sure to obtain...

  • Page 3: Intended Use

    10849.Pdf intended use the intended use of your bike or frameset is condition 1 / high performance road. For riding on pavement only condition 1 / high-performance road bikes and framesets are designed for riding on a paved surface where the tires do not lose ground contact. They are not intended to...

  • Page 4: Building Up A Frameset

    4 building up a frameset before building up a frameset, consult with your cannondale dealer and the component manufacturers, and discuss your riding style, ability, weight, and interest in and patience for maintenance. Make sure the components chosen are compatible with your bike and intended for yo...

  • Page 5: Inspection & Crash

    10849.Pdf 5 inspection & crash damage of carbon frames warning after a crash or impact: inspect frame carefully for damage (see part ii, section d. Inspect for safety in your cannondale bicycle owner’s manual.) do not ride your bike if you see any sign of damage, such as broken, splintered, or delam...

  • Page 6

    1 2 3 serial number the serial number (1) printed and permanently affixed barcode label. Use this serial number for warranty registration and theft recovery. See your cannondale bicycle owner’s manual for more information on warranty registration. Kf363/ bb guide extension screw cable routing the re...

  • Page 7

    10849.Pdf 7 ferrule ferrule rear brake housing rear brake frame opening cable cable front derailluer frame opening kp063/ top tube opening guide rear brake cable brake housing ferrule.

  • Page 8: 6 Nm

    8 seat post clean and apply carbon seat post gel (kf115/) to the post before inserting into frame 6 nm 6 nm minimum insert 80mm tighten both clamp bolts evenly saddle position and angle the seat post can be configured to place the saddle in a triathlon or time trial position. Please see “changing sa...

  • Page 9: 80Mm Minimum Insert

    10849.Pdf 9 80mm minimum insert the minimum insert depth that the seat post must be inserted into the frame is 80mm. Seat posts are permanently marked with ‘minimum insert” line 80mm up from the bottom of an un-cut seat post. Cutting the seat post in some frames (especially smaller sizes), a seat po...

  • Page 10

    10 6 nm 6 nm 6 nm kp062/ single rear facing cage twin side facing cages (shown). Triathalon time trial 1. 2. 3. 4. 5. 6. 7. 8. 9. Forward forward reflector.

  • Page 11

    Large foam washers position between seat post and brackets. Small foam washer affix the washer to arm at contact with post. 2008 slice multisport seatpost water bottle bracket assembly update parts please consult the cannondale slice carbon owner’s manual supplement 120849.Pdf for seat post installa...

  • Page 12

    10849.Pdf 11 6 nm 6 nm 6 nm kp062/ single rear facing cage twin side facing cages (shown). Triathalon time trial 1. 2. 3. 4. 5. 6. 7. 8. 9. Forward forward reflector changing saddle position 1. Remove the saddle clamp bolts (2) and remove clamp barrel (3), upper clamp (9), lower clamp (8), and barre...

  • Page 13: Compatibility

    1 si bottom bracket compatibility the bb shell is compatible with the bb30 standard. See http://www.Bb30standard.Com/ for information see si cranksets owner’s manual supplement. See http://www.Cannondale.Com/ tech/. Bearings shell bearings are sealed cartridge type and do not require lubrication. In...

  • Page 14

    10849.Pdf 1 qc616/ kb6180/ kt011/ kt010/ kf365/ groove drive side kt013/ 8mm kp018/ (ceramic) tool loctite 609 (green) adapter tool bb shell.

  • Page 15: Warnings

    14 si compression assembly the cylindrical shape of the top cap fits snugly within the carbon steering tube inside diameter (i.D.), supporting the steerer from the clamping force of the stem. It must fit snugly inside the i.D. Of the steerer. How to install the assembly 1. Assemble the fork, headset...

  • Page 16

    10849.Pdf 15 carbon steerer tube kp017/ headtube stem cut the steerer tube 2 - 3mm below the top of the installed stem. Headset top cap headset spacers 48mm set expander bolt so that the the expanding parts are not expanded and not loose. Thread on top cap. Do not grease. 5mm expander bolt 6.8n•m, 5...

  • Page 17: Caution

    1 kp065/ chainstay protection the chainstay plate (kp065/) located on the right chainstay just behind the chain rings, protects the chainstay from damage in the event the chain is dropped from the chain ring. Contact your cannondale dealer for a replacement if it is becomes missing or damaged. The c...

  • Page 18

    10849.Pdf 17 rear brake mount adapter to install a rear brake: 1. Remove the adapter bolt (1) with a 4mm allen wrench. 2. Lift the brake mount adapter (2) from the frame. 3. Install a serrated washer (3) onto the brake bolt and mount the brake onto the adapter. Tighten the brake recessed nut (4) to ...

  • Page 19

    18 geometry/specification j a c d e g m k b f h l reach st a c k item 51 54 56 56 60 wheel size 700c 700c 700c 700c 700c horizontal top tube length (cm)** a 50.5 53.5 55.0 56.5 58.0 measured size (cm) b 50 51.5 53.5 55.5 57.5 seat tube angle* c 75° 75° 75° 75° 75° head tube angle d 71.5° 71.5° 72° 7...

  • Page 20

    10849.Pdf 19 for an up to date list of kits available for your bike, please visit our tech center at : http://www.Cannondale. Com/bikes/tech/ replacement parts order frame kf363/ bb cable guide w/fixing bolt kf055/ inline adjuster (qty 2) kp061/ seat post slice aero kp062/ seat binder slice aero kp0...

  • Page 21

    0 order si hollowgram si hollowgram cranksets ka014/170slv crankset,sl,road 39/53,170 ka014/172slv crankset,sl,road 39/53,172 ka014/175slv crankset,sl,road 39/53,175 ka015/170slv crankset,sl,road 34/50,170 ka015/172slv crankset,sl,road 34/50,172 ka015/175slv crankset,sl,road 34/50,175 kp019/170l cra...