Cannondale Slice Owner's Manual

Other manuals for Slice: Owner's Manual

Summary of Slice

  • Page 1

    Slice owner’s man ual supplem ent cannondale eur ope cycling sports group europe , b.V. Hanzepoort 27 , 7570 gc, oldenz aal, netherlands (voice): +41 61 48 79380 (fax): +31 5415 142 40 servicedeskeurope@c yclingsportsgroup.Com cannondale uk cycling sports group vantage way, the f ulcrum, poole, dors...

  • Page 2: Your Cannondale

    1 slice - 131920 131920 (01/15) contents safety information .........................................2 technical information ..............................4-11 replacement parts ........................................13 your cannondale dealer to make sure your bike is serviced and maintained correc...

  • Page 3: Important Composites

    2 important composites message warning your bike (frame and components) is made from composite materials also known as “carbon fiber.” all riders must understand a fundamental reality of composites. Composite materials constructed of carbon fibers are strong and light, but when crashed or overloaded...

  • Page 4: Trainers

    3 trainers if you ride a trainer that requires removal of the front wheel and clamps the fork dropouts: be sure your fork quick release is tight! Relative movement will wear parts, weaken and damage your bike. If you ride a trainer that holds the bike up by clamping the rear quick release between tw...

  • Page 5: Aerodynamic

    4 aerodynamic handlebars aerodynamic or “triathlon” handlebar extensions are fitted to some triathlon or racing bikes. They are also added by customers. Understand that when riding on these extensions your steering and braking are adversely affected. When on the extensions, most riders find it hard ...

  • Page 6: Geometry / Specifications

    5 m kg e c i h d l f b a o n j technical information geometry / specifications size 44 48 51 54 57 60 a horizontal top tube length (cm) 45.0 47.0 48.9 50.7 52.6 54.5 b measured size (cm)* 46 48.6 50.3 52.4 54.4 56.5 c seat tube angle (degrees) 79° h h h h h d head tube angle (degrees) 71.2° h h 71.5...

  • Page 7: Cable Routing

    6 rb fd rd cable routing the frame features internal cable routing for both electronic remote and mechanical shifting and brakes. Full-length housing is utilized with mechanical shifting. The wiring harness or electronic remote systems are passed through frames fitting shown on the replacement parts...

  • Page 8

    7 rd fd rb rb fd rd kp362/ kp359/ the full housing and harness are routing through the top tube cover into the frame as shown..

  • Page 9: Di2 Battery Installation

    8 8 2 1 a b 3 c 4 di2 battery installation 1. Remove the bb components in order to install the seat post battery. 2. Attach the mounting plate (1) to the battery (2) with 3mm cable ties. Make sure the plate lip (b) tie heads (a) are positioned as shown. 3. Attach the battery wire, handlebar wire and...

  • Page 10: Rear Derailleur Hanger

    9 1.1 nm, 10 inlbs loctite 242 (blue) 1 2 rear derailleur hanger to replace: remove the mounting screws and remove the old hanger from the dropout. Clean the area around the dropout and inspect the frame carefully for any cracks or damage. If you find damage have the frame inspected by your cannonda...

  • Page 11: Seat Post

    10 100mm 2 4 nm, 35inlbs kp361/ 4 mm 6-7 nm, 53-62 inlbs 1 kp360/ kf115/ seat post for more information about carbon fiber seat posts, see also “appendix d. Care and maintenance of carbon fiber seat posts” in your cannondale bicycle owner’s manual. Warning the seat post must only be cut by a profess...

  • Page 12: Bottom Bracket

    11 kp018/ - ceramic kb6180/ - standard 39mm 34mm bb30-73a asymmetric 73mm (5mm) non-drive side drive side 34mm bb30 - 68mm 34mm bottom bracket the bottom bracket shell width is bb30-73a cranksets. See www.Bb30standard.Com. Sisl2 crankset installation the following procedure should only be completed ...

  • Page 13

    12 0.5mm 1-3 6. 7. 7. 11. 12. 13. 14. 1. 2. Kp251/blk grease - 40 nm, (30 ftlbs) 6. 2.6 mm drive 13. Non-drive 2.5 mm kt103/ 10mm fixing bolt 40 nm 30 ftlbs 2.5mm 2.6mm 40 nm, 30 ftlbs kt012/ kp250/ kp021/ 3/8in drive 109mm 10mm 40 nm, 30 ftlbs 3 2 10. 3. 5. 15. 3 kp244/ 39 x 53 kp245/ 34 x 50 kp137...

  • Page 14

    13 1.1 nm, 10 inlbs loctite 242 (blue) kp361/ kp359/ kp360/ kp362/ kp255/ kp363/ 2x kp017/ kp363/ 2x kf103/ kp203/ kb6180/ kp018/ code description kp017/ kit comp assy 23 6id expander kp362/ cover kp203/ headset (1 1/18) kp359/ bb cable guide kp363/ grommet - di2 (qty 2) kp255/ rd hanger kp362/ cove...

  • Page 15: Slice

    Slice owner’s man ual supplem ent cannondale eur ope cycling sports group europe , b.V. Hanzepoort 27 , 7570 gc, oldenz aal, netherlands (voice): +41 61 48 79380 (fax): +31 5415 142 40 servicedeskeurope@c yclingsportsgroup.Com cannondale uk cycling sports group vantage way, the f ulcrum, poole, dors...