Cannondale Super Six Owner's Manual Supplement

Other manuals for Super Six: Owner's Manual

Summary of Super Six

  • Page 1

    Read this manual carefully! It contains important safety information. Keep it for future reference. Please note that the specifications and information in this manual are subject to change for product improvement. For the latest product information, go to http://www.Cannondale. Com/tech/. Super six ...

  • Page 2: Safety

    Safety information about this supplement cannondale owner’s manual supplements provide important model specific safety, maintenance, and technical information. They are not replacements for your cannondale bicycle owner’s manual. This supplement may be one of several for your bike. Be sure to obtain...

  • Page 3: Intended Use

    10858.Pdf intended use the intended use of your bike or frameset is condition 1 / high performance road. For riding on pavement only condition 1 / high-performance road bikes and framesets are designed for riding on a paved surface where the tires do not lose ground contact. They are not intended to...

  • Page 4: Building Up A Frameset

    4 building up a frameset before building up a frameset, consult with your cannondale dealer and the component manufacturers, and discuss your riding style, ability, weight, and interest in and patience for maintenance. Make sure the components chosen are compatible with your bike and intended for yo...

  • Page 5: Inspection & Crash

    10858.Pdf 5 inspection & crash damage of carbon frames warning after a crash or impact: inspect frame carefully for damage (see part ii, section d. Inspect for safety in your cannondale bicycle owner’s manual.) do not ride your bike if you see any sign of damage, such as broken, splintered, or delam...

  • Page 6: Serial Number

    1 3 2 figure 2. Serial number the serial number (1) printed and permanently affixed barcode label. Use this serial number for warranty registration and theft recovery. See your cannondale bicycle owner’s manual for more information on warranty registration. Bottom bracket guide the cable guide (2) i...

  • Page 7

    10858.Pdf 7 headset qc777/ kp044/ qc778/ 48mm kp017/ 6mm 5mm 6.8nm 35mm figure 3. Use only original cannondale parts..

  • Page 8: Installation

    8 seat post / binder kf362/bbq kf115/ figure 4. Installation 1. Make sure the seat post, binder, and seat tube are clean. Use a dry towel. 2. Apply small amount of seat post gel to seat post surface and reinstall the post into the seat tube. 4. Tighten the seat binder with a torque wrench. Do not ex...

  • Page 9: Crankset Compatability

    10858.Pdf 9 bottom bracket shell kb6180/ qc616/ kt011/ kt013/ 15mm 8mm kt012/ 3/8” drive kt010/ figure 5. Crankset compatability the bb shell is compatable with the bb30 standard. See http://www.Bb30standard.Com/ for information see si cranksets owner’s manual supplement. See http://www.Cannondale.C...

  • Page 10

    10 bb30-to-68mm standard adapter the adapter (cannondale kit kf365/) converts the bb30 bottom bracket cranksets for use with 68mm bottom brackets. Once installed, the adpater can not be removed. The adapter is not a repair part and will only work in undamaged frames in good condition. Improper insta...

  • Page 11: Cannondale Tools

    10858.Pdf 11 cannondale tools kt011/ is a bearing removal tool. Kt010/ is a set of bearing installation tools to be used with a standard headset press. Kt013/ a two piece tool set required for removing the crankarms si hollowgram alloy cranksets. Kt011/ kt010/ kb6180/ kt013/ 8mm figure 7..

  • Page 12

    1 chainstay protection the chainstay plate located on the right chainstay just behind the chainrings, protects the chainstay from damage in the event the chain is dropped from the chainring. Contact your cannondale dealer for a replacement if it is becomes missing or damaged. Figure 8. The clear cha...

  • Page 13: Caution

    10858.Pdf 1 derailleur hanger before re- installing (same or new): clean dropout and inspect carefully for any cracks or damage. Clean surfaces and apply a light film of bike grease to the dropout to minimize any noise or “creaking” that might result from very slight movement between the dropout and...

  • Page 14

    14 geometry/specification a b c d e f g h i j k l m item 48 50 52 54 56 58 60 63 horizontal top tube length (cm) a 51.5 52.5 53.5 54.5 56.0 57.5 59.0 60.0 measured size (cm)* b 46 48 50 52 54 56 58 61 seat tube angle c 74.5° 74.5° 74° 73.5° 73.5° 73° 72.5° 72° head tube angle d 72° 72.5° 73° 73° 73°...

  • Page 15

    10858.Pdf 15 replacement parts order kf363/ bb cable guide w/fixing bolt kf055/ inline adjuster (qty 2) kf362/bbq seat binder 34.9mm kf115/ seat post gel kp045/ chainstay protect-supersix order headset & fork parts kp043/ fork super six kp044/ headset super six qc777/ crown race qc778/ brake bolt(35...

  • Page 16

    1 owner notes record maintenance history, service information here. Date work performed.