1. DL manuals
  2. Canoga Perkins
  3. Modem
  4. 2345
  5. User Manual

Canoga Perkins 2345 User Manual

Manual is about: T3 Fiber Optic Modem

Summary of 2345

  • Page 1

    Ed geac cess model 2345 t3 fiber optic modem user manual.

  • Page 3: Caution!

    Edgeaccess universal chassis system model 2345 user manual caution! This product may contain a laser diode operating at a wavelength of 1300 nm - 1600 nm. Use of optical instruments (e.G., collimating optics) with this product may increase eye hazard. Use of controls or adjustments, or performing pr...

  • Page 4: Notice

    Edgeaccess universal chassis system model 2345 user manual ii notice canoga perkins has prepared this users manual for use by customers and canoga perkins personnel as a guide for the proper installation, operation and/or maintenance of canoga perkins equipment. The drawings, specifications and info...

  • Page 5: Table of Contents

    Edgeaccess universal chassis system model 2345 user manual iii table of contents chapter 1 overview ................................................................................................ 1-1 chapter 2 hardware installation and functions ................................................. 2-1...

  • Page 6: List Of Figures

    Edgeaccess universal chassis system model 2345 user manual iv chapter 5 specifications..........................................................................................5-1 2345 specifications .......................................................................................................

  • Page 7: Chapter 1

    Edgeaccess universal chassis system model 2345 user manual 1-1 chapter 1 overview the model 2345 managed t3 fiber optic modem with optical line interface module (olim) extends t3 (44.736 mbps) signals between devices located up to 120 km apart. The olim supports multimode and single mode fiber. Use ...

  • Page 8

    Edgeaccess universal chassis system model 2345 user manual 1-2 figure 1. Rackmount 2345 figure 2. Standalone 2345, front and rear panels.

  • Page 9

    Edgeaccess universal chassis system model 2345 user manual 1-3 the 2345 supports both full modem redundancy, with two modems, and fiber redundancy, through dual-path olims. You can enable automatic or manual redundancy or disable the option. Dual-path modules provide redundancy for the fiber link. T...

  • Page 10

    Edgeaccess universal chassis system model 2345 user manual 1-4.

  • Page 11: Chapter 2

    Edgeaccess universal chassis system model 2345 user manual 2-1 chapter 2 hardware installation and functions you can install the 2345 in a ucs 1000 or 1001 or place a standalone 2345 in a flat, secure location. Before starting to install the 2345 in a chassis, make sure the chassis is installed and ...

  • Page 12

    Edgeaccess universal chassis system model 2345 user manual 2-2 sw3 w2/w3, w4/w5 w6/w7 figure 3. Jumper and switch locations 4. Set sw3: for framed data, set it toward the bnc connectors; or for unframed data, set it away from the bnc connectors. 5. If this is a standalone 2345, slide the board back ...

  • Page 13

    Edgeaccess universal chassis system model 2345 user manual 2-3 8. Connect the power: • if this is a rackmount 2345, the module receives power automatically from the chassis. For details, see the user manual for the chassis. • if this is a standalone 2345, see figure 2 and connect the power at the ba...

  • Page 14

    Edgeaccess universal chassis system model 2345 user manual 2-4 13. Use canned air to blow out any dust from the female fiber coupler. Caution: to avoid damaging the fiber end-surface or connector, use extreme care when installing or removing cables. 14. Plug in the optical cables with tx to rx, and ...

  • Page 15: Alarms

    Edgeaccess universal chassis system model 2345 user manual 2-5 led status indicates los off normal operation red local electrical signal below threshold red blinking remote electrical signal below threshold ais/unfrm off normal operation green normal operation in unframed mode amber local modem rece...

  • Page 16

    Edgeaccess universal chassis system model 2345 user manual 2-6.

  • Page 17: Chapter 3

    Edgeaccess universal chassis system model 2345 user manual 3-1 chapter 3 software management you can manage the 2345 through vt100 terminal emulation, which is accessible by a telnet session, hyperterminal or similar terminal emulation software, a standard snmp network manager, and canogaview. If th...

  • Page 18: Management User Interface

    Edgeaccess universal chassis system model 2345 user manual 3-2 3. At the connection description dialog, select an icon, enter a name for the connection to the system, and click ok. 4. At the connect to dialog, pull down the connect using menu, select the com port, and click ok. 5. At the com propert...

  • Page 19

    Edgeaccess universal chassis system model 2345 user manual 3-3 messages and urgent status screen navigation instructions change options status reports model number chassis and slot information figure 4. General screen format user interface organization the user interface consists of selectable, nest...

  • Page 20

    Edgeaccess universal chassis system model 2345 user manual 3-4 login and main menu when you connect directly to the 2345 or to the dmm through hyperterminal or telnet, the first screen is the login menu. To log in, follow these steps: 1. If this is your initial setup and no username or password has ...

  • Page 21: Manage The 2345

    Edgeaccess universal chassis system model 2345 user manual 3-5 manage the 2345 you can manage the hardware and software for the module, including communication access. View the hardware setup to view information about the hardware setup, including model and serial numbers, as well as view basic syst...

  • Page 22

    Edgeaccess universal chassis system model 2345 user manual 3-6 set up snmp access direct snmp access is available for standalone modems only. To set values for basic system parameters, including some snmp parameters, go to the snmp configuration parameters menu. See table 6. To access the snmp confi...

  • Page 23

    Edgeaccess universal chassis system model 2345 user manual 3-7 table 7. Trap configuration options trap when enabled, sends a trap if. . . Active link/modem the active link fails; the remote device goes on- or offline; or redundancy switches between primary and secondary inactive link/modem the inac...

  • Page 24

    Edgeaccess universal chassis system model 2345 user manual 3-8 set up the modem/slip/ppp parameters although the default values for the serial communication parameters meet requirements for most systems, you made need to update them for a particular situation; use the modem/slip/ppp configuration me...

  • Page 25

    Edgeaccess universal chassis system model 2345 user manual 3-9 if you do not have a script file, you dial in through a modem, and the networking option is set to vt100 operation, you will not see the screens, but the 2345 responds to the commands normally. Follow these steps: 1. Dial in through a mo...

  • Page 26: Manage Security

    Edgeaccess universal chassis system model 2345 user manual 3-10 3. Access the canoga perkins web site, click downloads, scroll to the 2345 filename, and compare the version number listed there with the version numbers you recorded. The 2345 firmware file name is similar to 23450106.Zip , where "2345...

  • Page 27: Manage The Modem

    Edgeaccess universal chassis system model 2345 user manual 3-11 set up host access the snmp agent allows access to up to 24 host ip addresses listed in the host access table. Set up the host information for access to the 2345 on the host access table screen. When a host attempts to access the 2345, ...

  • Page 28

    Edgeaccess universal chassis system model 2345 user manual 3-12 set up functions and check status you can set up the modem functions and check status on the functional configuration screen. To work with modem functions, follow these steps: 1. At the system configuration menu, type 2 , "functional co...

  • Page 29

    Edgeaccess universal chassis system model 2345 user manual 3-13 you can enable switchover on bad sql on the functional configuration screen; follow these steps: 1. At the system configuration menu, type 2 , "functional configuration," and press . 2. At the functional configuration screen, type 7 , s...

  • Page 30

    Edgeaccess universal chassis system model 2345 user manual 3-14 • one screen shows g.826 statistics. • errored blocks: blocks of data with one or more bit errors • errored seconds: number of one-second periods with any errored blocks; includes all sev errored sec • sev errored secs: severely errored...

  • Page 31: Chapter 4

    Edgeaccess universal chassis system model 2345 user manual 4-1 chapter 4 maintenance and troubleshooting well-maintained modules and cabling can help ensure trouble-free operation. General maintenance well-maintained components and clearly identified cables help assure optimum system operation. Dama...

  • Page 32: Troubleshooting

    Edgeaccess universal chassis system model 2345 user manual 4-2 note: for accurate results, warm up each unit for at least 30 minutes before checking power levels. The transmission laser in a 2345 turns on automatically when the chassis receives power. To measure the output power, follow these steps:...

  • Page 33

    Edgeaccess universal chassis system model 2345 user manual 4-3 the leds show both normal and fault conditions. Typically, if a led is steady red, the fault is the local 2345; if it blinks red, the fault is in the remote modem. In particular, if sql is red, the optical signal level is below threshold...

  • Page 34

    Edgeaccess universal chassis system model 2345 user manual 4-4 set the electrical line relay use the electrical line relay option to open or close the relays for the or the inactive circuits in order to diagnose a fault on a circuit that could not, otherwise, transmit and receive data. To set the el...

  • Page 35

    Edgeaccess universal chassis system model 2345 user manual 4-5 alternately, in a standalone 2345, only, you can set the loopback switch on the front panel for loc (local) or rem (remote) loopback; see figures 6 and 9. For normal operation, keep the switch at off. Fiber link figure 5. Normal operatio...

  • Page 36

    Edgeaccess universal chassis system model 2345 user manual 4-6 figure 9. Remote loopback figure 10. Remote bidirectional loopback.

  • Page 37: Chapter 5

    Edgeaccess universal chassis system model 2345 user manual 5-1 chapter 5 specifications see also the specifications for the chassis or standalone enclosure. 2345 specifications physical specifications dimensions standalone: rackmount: 1.7" h x 8.5" w x 11.5" d (44 x 215 x 292 mm) 1.0" h x 7.9 " w x ...

  • Page 38: 2345 Models

    Edgeaccess universal chassis system model 2345 user manual 5-2 2345 models model options base unit with electrical interface 2345-2000 rack mount for chassis installation 2345-1100 standalone with snmp, 120-240 vac power supply 2345-1400 standalone with snmp, -48 vdc power supply single path olim l1...

  • Page 39: Appendix A

    Edgeaccess universal chassis system model 2345 user manual a-1 appendix a warranty limited lifetime warranty effective july 1, 2005 and after, canoga perkins warrants that, at the time of sale, and, for its lifetime, with certain exceptions noted below, every canoga perkins' labeled product purchase...

  • Page 40

    Edgeaccess universal chassis system model 2345 user manual a-2 limitations canoga perkins may at its sole discretion modify its limited warranty at any time and from time to time. Other than those expressly stated herein, there are no other warranties of any kind, expressed or implied, and specifica...

  • Page 41: Appendix B

    Edgeaccess universal chassis system model 2345 user manual b-1 appendix b acronyms and abbreviations ais alarm led or all ones signal alm alarm cfg configuration led cim chassis interconnect module cls composite los led dmm domain management module lbo line build out los loss of signal mbps megabits...

  • Page 42

    Edgeaccess universal chassis system model 2345 user manual b-2.

  • Page 43: Index

    Edgeaccess universal chassis system model 2345 user manual 5-1 index a add host access, 3-11 alarm configuration screen, 3-7 c change password screen, 3-11 create host access, 3-11 d delete host access, 3-11 diagnostics screen, 4-4 dmm main menu, 3-4 domain management module menu, 3-4 dsx3 performan...

  • Page 44

    Edgeaccess universal chassis system model 2345 user manual 5-2 s screen alarm configuration, 3-7 change password, 3-11 diagnostics, 4-4 dmm main menu, 3-4 domain management module menu, 3-4 edit host access screen, 3-11 functional configuration, 3-12 link error counters, 3-14 modem/slip/ppp menu, 3-...

  • Page 46

    Canoga perkins corporation 20600 prairie street chatsworth, california 91311-6008 usa phone: (818) 718-6300 fax: (818) 718-6312 web site: www.Canoga.Com email: fiber@canoga.Com.