1. DL manuals
  2. Canoga Perkins
  3. Modem
  4. 2346
  5. User Manual

Canoga Perkins 2346 User Manual

Manual is about: T3 Fiber Optic Modem

Summary of 2346

  • Page 1

    Ed geac cess model 2346 t3 fiber optic modem user manual.

  • Page 3: Caution!

    Edgeaccess ® universal chassis system 2346 t3 modem i caution! This product may contain a laser diode emitter operating at a wavelength of 1300 nm - 1600 nm. Use of optical instruments (for example: collimating optics) with this product may increase eye hazard. Use of controls or adjustments or perf...

  • Page 4: Notice

    Edgeaccess ® universal chassis system 2346 t3 modem ii notice canoga perkins has prepared this users manual for use by customers and canoga perkins personnel as a guide for the proper installation, operation and/or maintenance of canoga perkins equipment. The drawings, specifications and information...

  • Page 5: Table of Contents

    Edgeaccess universal chassis system 2346 t3 modem iii table of contents chapter 1 overview ................................................................................................ 1-1 chapter 2 hardware installation and functions ................................................. 2-1 set up a...

  • Page 6: List Of Figures

    Edgeaccess ® universal chassis system 2346 t3 modem iv chapter 5 specifications..........................................................................................5-1 2346 specifications ..............................................................................................................

  • Page 7: Chapter 1

    Edgeaccess universal chassis system 2346 t3 modem 1-1 chapter 1 overview the 2346 managed t3 fiber optic modem converts and extends t3/ds3 signals between devices located up to 100 km apart. Use the modem to extend a pbx, router, video codec, m13 multiplexer, or atm switch. The 2346 receives and tra...

  • Page 8

    Edgeaccess ® universal chassis system 2346 t3 modem 1-2.

  • Page 9: Chapter 2

    Edgeaccess universal chassis system 2346 t3 modem 2-1 chapter 2 hardware installation and functions before setting up the 2346, make sure the chassis or enclosure is installed and its user manual is available for reference. If the system includes an optional dmm and cim(s), make sure these are avail...

  • Page 10

    Edgeaccess ® universal chassis system 2346 t3 modem 2-2 sw2 w10 figure 2. Switch and jumper locations 4. To install a 2346 in a ucs 1000 or 1001 chassis, you must use a model 1230 bam; each bam can hold up to two 2346 modems. Follow these steps to install the bam and the 2346: a. Insert a bam into a...

  • Page 11

    Edgeaccess universal chassis system 2346 t3 modem 2-3 caution: to avoid damaging the fiber end-surface or connector, use extreme care when installing or removing cables. 10. Plug in the optical cables: • if you have a simplex optical connector, use a single strand, single mode fiber cable between a ...

  • Page 12: Alarm Functions

    Edgeaccess ® universal chassis system 2346 t3 modem 2-4 alarm functions the 2346 can generate major and minor alarms. • ucs 1000 and 1001: a bam is required and holds up to two 2346 modems. On the bam, the status (sta) led lights green if either 2346 is operating normally. If both modems have errors...

  • Page 13: Chapter 3

    Edgeaccess universal chassis system 2346 t3 modem 3-1 chapter 3 software management you can manage the 2346 through vt100 terminal emulation, which is accessible by a telnet session, hyperterminal or similar terminal emulation software, a standard snmp network manager, and canogaview. If the 2346 is...

  • Page 14: Management User Interface

    Edgeaccess ® universal chassis system 2346 t3 modem 3-2 5. At the com properties dialog, on the port settings tab, check for these selections: • bits per second: 19200 bps • data bits: 8 • parity: none • stop bits: 1 • flow control: none 6. `click ok. Hyperterminal connects to the system and the vt1...

  • Page 15

    Edgeaccess universal chassis system 2346 t3 modem 3-3 use these keys to navigate the screens: • space bar when a menu item is highlighted, press to cycle through all options for that item. • tab press to move the highlight to the next column to the right. • enter press to select the highlighted opti...

  • Page 16: Manage The 2346

    Edgeaccess ® universal chassis system 2346 t3 modem 3-4 • to reach the 2346 directly, follow these steps: a. Type 4 , "manage or access a specific module," and press . B. Type the slot and chassis numbers with a slash, such as " 1/4 " for chassis 1, slot 4, and then press . C. At the module menu, ty...

  • Page 17

    Edgeaccess universal chassis system 2346 t3 modem 3-5 table 3. Hardware configuration report item shows chassis/slot, type, temperature where the modem is installed and status, if available modem model, type, revision, serial no. Data for the modem and optical interface power supply pri, sec type(s)...

  • Page 18

    Edgeaccess ® universal chassis system 2346 t3 modem 3-6 • bootp enabled: enable this if the module needs to obtain its ip address from a bootp server; when the unit has an ip address, disable bootp • serial port config: set the type of serial port connection: vt100, slip, or ppp • telnet timeout: se...

  • Page 19

    Edgeaccess universal chassis system 2346 t3 modem 3-7 2. At the alarm output configuration screen, type the number for an alarm and press . See table 5. 3. Press to cycle to enabled or disabled and press . 4. To return to the main menu, press . These selections do not affect how the cim major and mi...

  • Page 20

    Edgeaccess ® universal chassis system 2346 t3 modem 3-8 4. To enter a new modem initialization string, type 5 , type the new string, and press ; the default string is " at ". Note: for details on a different initialization string, see the documentation for your modem. 5. To return to the main menu, ...

  • Page 21

    Edgeaccess universal chassis system 2346 t3 modem 3-9 update software each module in the universal chassis system has two flash memory banks that store software: • the active flash memory holds the software currently in use • the inactive flash memory holds the new software from a download or the ol...

  • Page 22: Manage Security

    Edgeaccess ® universal chassis system 2346 t3 modem 3-10 5. When the file transfer is complete: a. At the software upgrade menu, type 2 , "swap bank," and press . B. Type 1 , "software reset," and press . The 2346 resets and starts using the new firmware. 6. To update a remote partner, type 3 , "cop...

  • Page 23: Manage The Modem

    Edgeaccess universal chassis system 2346 t3 modem 3-11 change your password you can update your password for the 2346 in order to maintain security. You cannot change the password for any other users, especially those who are not logged in. To update your password, follow these steps: 1. From the ut...

  • Page 24

    Edgeaccess ® universal chassis system 2346 t3 modem 3-12 monitor modem performance you can monitor the performance of both the local and remote modems at the link errors report. The report includes timers and checks for signal errors. In addition, the 2346 uses the bit error rate test (bert), which ...

  • Page 25: Chapter 4

    Edgeaccess universal chassis system 2346 t3 modem 4-1 chapter 4 maintenance and troubleshooting well-maintained modules and cabling can help ensure trouble-free operation. General maintenance well-maintained components and clearly identified cables help assure optimum system operation. Damaged fiber...

  • Page 26: Troubleshooting

    Edgeaccess ® universal chassis system 2346 t3 modem 4-2 note: for accurate results, warm up each unit for at least 30 minutes before checking power levels. The transmission laser in a 2346 turns on automatically when the chassis receives power. To measure the output power, follow these steps: 1. Cle...

  • Page 27

    Edgeaccess universal chassis system 2346 t3 modem 4-3 the front panel leds show both normal and fault conditions. Typically, if a led is steady red, the fault is in the local 2346; if it blinks red, the fault is in the remote modem. Additional information about fault conditions appears in the system...

  • Page 28

    Edgeaccess ® universal chassis system 2346 t3 modem 4-4 problems with configuration if a configuration error appears and you have difficulty isolating the fault, you can reset all configurable settings to default except for the time and date, password, bootp setting, and telnet timeout. You can then...

  • Page 29

    Edgeaccess universal chassis system 2346 t3 modem 4-5 loopback use loopback to diagnose a fault on the optical link, either on a modem or with a cable. The 2346 supports both local and remote loopback in one or both directions. Set loopback either in software for a managed 2346 or at the loopback fu...

  • Page 30

    Edgeaccess ® universal chassis system 2346 t3 modem 4-6 fiber link figure 4. Normal operation ais figure 5. Local loopback figure 6. Local bidirectional loopback figure 7. Local loopback at both ends.

  • Page 31

    Edgeaccess universal chassis system 2346 t3 modem 4-7 figure 8. Remote loopback figure 9. Remote bidirectional loopback.

  • Page 32

    Edgeaccess ® universal chassis system 2346 t3 modem 4-8.

  • Page 33: Chapter 5

    Edgeaccess universal chassis system 2346 t3 modem 5-1 chapter 5 specifications see also the specifications for the chassis or standalone enclosure. 2346 specifications data rates: 44.736 mbps physical specifications dimensions 3.0"h x 1.0"w x 9.0"d (76.2 mm x 25.4 mm x 228.6 mm) weight: 0.3 lb. (0.1...

  • Page 34: 2346 Models

    Edgeaccess ® universal chassis system 2346 t3 modem 5-2 2346 models model fiber optic option 2346-1121 1310 nm mm st, 11 db 2346-1321 1310 nm sm st, 10 db 2346-1331 1310 nm sm st 26 db 2346-1531 1550 nm sm st 30 db 2346-1124 1310 nm mm sc 11 db 2346-1324 1310 nm sm sc 10 db 2346-1334 1310 nm sm sc 2...

  • Page 35: Appendix A

    Edgeaccess universal chassis system 2346 t3 modem a-1 appendix a warranty limited lifetime warranty effective july 1, 2005 and after, canoga perkins warrants that, at the time of sale, and, for its lifetime, with certain exceptions noted below, every canoga perkins' labeled product purchased will be...

  • Page 36

    Edgeaccess ® universal chassis system 2346 t3 modem a-2 limitations canoga perkins may at its sole discretion modify its limited warranty at any time and from time to time. Other than those expressly stated herein, there are no other warranties of any kind, expressed or implied, and specifically exc...

  • Page 37: Appendix B

    Edgeaccess universal chassis system 2346 t3 modem b-1 appendix b acronym and abbreviation list ami alternate mark inversion b3zs bipolar 3-zero substitution bam bus access module cim chassis interconnect module dmm domain management module lnk link mm multimode mmf multimode fiber smf single mode fi...

  • Page 38

    Edgeaccess ® universal chassis system 2346 t3 modem b-2.

  • Page 39: Index

    Edgeaccess universal chassis system 2346 t3 modem i-1 index a alarm configuration screen, 3-6 alarms, 2-4 b baud and modem/slip/ppp, 3-7 c change password, 3-11 copy configuration, 3-11 d domain management module menu, 3-4 e edit host access screen, 3-10 f functional configuration screen, 3-11 h har...

  • Page 40: Canoga Perkins Corporation

    Canoga perkins corporation 20600 prairie street chatsworth, california 91311-6008 usa phone: (818) 718-6300 fax: (818) 718-6312 web site: www.Canoga.Com email: fiber@canoga.Com.