- DL manuals
- Canon
- All in One Printer
- 2177B002 - Pixma MP470 Photo All-In-One Inkjet Printer
- Quick Start Manual
Canon 2177B002 - Pixma MP470 Photo All-In-One Inkjet Printer Quick Start Manual
Summary of 2177B002 - Pixma MP470 Photo All-In-One Inkjet Printer
Page 1
Series quick start guide qt5-1007-v01 xxxxxxxx © canon inc. 2007 printed in vietnam the following fine cartridges are compatible with this product. For information on product specifications, please visit our website at www.Usa.Canon.Com photo all-in-one.
Page 2
Ordering information for additional supplies, use the following descriptions and order numbers. Description order # fine cartridges pg-30 black 1899b002 cl-31 color 1900b002 pg-40 black 0615b002 cl-41 color 0617b002 canon specialty papers all occasion photo cards (4" x 8"/ 50 sheets) 1029a069 glossy...
Page 3
Photo all-in-one quick start guide series.
Page 4
Canon pixma mp470 series photo all-in-one quick start guide. Copyright this manual is copyrighted by canon u.S.A., inc. With all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of canon u.S.A., inc. © 20...
Page 5
Table of contents 1 before using the machine .............................2 operation panel..............................................2 how to navigate menus on the lcd ..............4 turning the machine on and off ....................8 handling the original document.....................9 loadin...
Page 6
2 before using the machine before using the machine operation panel (1) on/off button turns the machine on and off. Before turning on the machine, make sure the document cover is closed. (2) memory card button switches the machine to the memory card mode. (3) settings button used to configure the pa...
Page 7
3 before using the machine (11) {, }, [, and ] buttons scroll through menu selections, and increases/decreases setting values, such as the number of copies. (12) menu button displays menus. (13) scan button switches the machine to the scan mode. Used when the machine is connected to your computer. F...
Page 8
4 before using the machine how to navigate menus on the lcd you can make good use of the various functions of the machine with the menu screen and the settings screen on the lcd. This section describes how to use the menu screen and the settings screen. (1) scan button (2) copy button (3) menu butto...
Page 9
5 before using the machine menu screens note z you can display the maintenance screen or device settings screen in the copy mode, memory card mode, or scan mode. Refer to the following list to confirm the menu items available in the menu screen. Z for details on maintenance, see “when printing becom...
Page 10
6 before using the machine basic operation on the settings screen you can change the print settings such as page size, media type, bordered or borderless print, etc. On the settings screen either in the copy mode, in the memory card mode, or when printing directly from a pictbridge compliant device....
Page 11
7 before using the machine 4 change the setting. (1) use the [ or ] button to change the setting. Example: change to 4"x6"(101x152) here. 5 complete setting. (1) press the settings button. The lcd returns to the previous screen. Note for details on the setting items z for the settings in the copy mo...
Page 12
8 before using the machine turning the machine on and off turn on the machine before printing. Turning on the machine before turning on the machine, confirm the following. Z the fine cartridges are installed properly. If you are using the machine connected to a computer, confirm also the following. ...
Page 13
9 before using the machine z screen-saver mode the lcd goes out if the machine is not operated for about five minutes*. * you cannot change the wait time before the lcd goes out. Handling the original document this section describes how to load the original document on the platen glass. Original doc...
Page 14
10 before using the machine z to scan photographs place the photograph at least 0.4 inches / 10 mm away from and in square with the edges of the platen glass. Note z the machine cannot scan the shaded area in the figure below. Z for details about making copies, see “copying” on page 20. Z for detail...
Page 15
11 before using the machine when setting two or more photographs at the same time, place them at least 0.4 inches / 10 mm apart from each other. 3 gently close the document cover. Important z do not place any objects weighing more than 4.4 lb / 2.0 kg on the platen glass. Z do not press or put weigh...
Page 16
12 before using the machine loading printing paper this section describes how to load printing paper in the rear tray. Using specialty media canon recommends that you use canon genuine media to ensure optimal print quality. Z photo quality media z glossy photo paper z matte photo paper z photo paper...
Page 17
13 before using the machine paper handling z recommended paper and requirements *1 paper with a model number is canon specialty media. Refer to the instruction manual supplied with the paper for detailed information on the printable side and notes on handling paper. For information on the paper size...
Page 18
14 before using the machine *3 proper feeding of paper may not be possible at the maximum capacity depending on the type of paper or environmental conditions (either very high or low temperature and humidity). In such cases, reduce the sheets of paper you load at a time to around half (around 0.2 in...
Page 19
15 before using the machine loading paper 1 flatten the four corners of the paper before loading it. Important z if you cut plain paper to 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x 86.0 mm (credit card-size) for a trial print, it can cause paper jams. Z you ca...
Page 20
16 before using the machine 2 prepare to load paper. (1) open the paper support, then pull out the paper support extension. (2) open the paper output tray. (3) open the output tray extension. (4) adjust the position of the paper thickness lever. Set it to the right when printing on envelopes or t-sh...
Page 21
17 before using the machine loading envelopes use either european dl or us comm. Env. #10-sized envelope. 1 prepare the envelopes. Z press down on all four corners and edges of the envelopes to flatten them. Z if the envelopes are curled, hold the opposite corners and gently twist them in the opposi...
Page 22
18 before using the machine 2 load the envelopes. (1) load the envelope against the right side of the rear tray. Load with the address side facing up and the rear flaps down on the left. Up to 10 envelopes can be loaded at once. (2) pinch the paper guide and slide it against the left side of the env...
Page 23
19 before using the machine loading small-sized paper you can use 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, and credit card-sized papers. 1 load the paper. (1) load the small-sized paper against the right side of the rear tray with the print side facing up. (2) pinch the paper guide an...
Page 24
20 copying copying making copies this section describes the basic procedure to make copies. 1 turn on the machine. See “turning the machine on and off” on page 8. 2 press the copy button to select the copy mode if another mode has been selected. 3 load paper. See “loading printing paper” on page 12....
Page 25
21 copying tab 1 you can specify the paper settings for printing or image quality. (1) page size select the page size of the loaded paper. (2) media type select the media type of the loaded paper. (3) print quality adjust print quality according to the original. (4) magnification specify the reducti...
Page 26
22 copying using useful copy functions for details, refer to “using useful copy functions” in the user’s guide on-screen manual. Important even while auto intensity on is selected, you can change the intensity by using the [ or ] button. Move the cursor to the center of the slide bar to enable auto ...
Page 27
23 printing from a memory card printing from a memory card memory cards supported by this machine the following memory cards are compatible with this machine. *1 use the special adapter provided with the card. *2 use “sd card adapter” provided with the card. *3 requires purchase of a separate compac...
Page 28
24 printing from a memory card printable image data this machine supports jpeg and tiff images created by dcf ver. 1.0/2.0 standard compliant digital cameras (exif ver. 2.2/2.21 compliant). Inserting the memory card 1 turn on the machine. See “turning the machine on and off” on page 8. 2 open the ca...
Page 29
25 printing from a memory card removing the memory card 1 open the card slot cover. 2 make sure that the access lamp is lit, then remove the memory card. 3 close the card slot cover. Printing photographs (display photo) 1 prepare for printing. (1) turn on the machine. See “turning the machine on and...
Page 30
26 printing from a memory card setting items you can change the page size, media type, or print quality by using the settings button. Tab 1 you can specify the settings such as the size and type of paper, bordered/borderless, and date/ file no. (1) page size select the page size of the loaded paper....
Page 31
27 printing from a memory card (2) vivid photo makes green and blue more lively. (3) photo optimizer pro automatically optimizes brightness and tone of a photo. (4) noise reduction reduces the noise on blue areas like the sky as well as on black areas. (5) face brightener brightens a darkened face o...
Page 32
28 printing from a memory card printing by using the photo index sheet 1 turn on the machine. 2 load a4 or letter-sized plain paper. 3 insert a memory card into the card slot. See “inserting the memory card” on page 24“. 4 select the photo index sheet menu. (1) press the memory card button. (2) use ...
Page 33
29 printing from your computer printing from your computer this section describes procedure for basic printing. Printing with windows 1 turn on the machine and load the paper in the machine. See “turning the machine on and off” on page 8 and “loading printing paper” on page 12. 2 create a document o...
Page 34
30 printing from your computer printing with macintosh 1 turn on the machine and load the paper in the machine. See “turning the machine on and off” on page 8 and “loading printing paper” on page 12. 2 create a document or open a file to print using an appropriate application software. 3 select page...
Page 35
31 scanning images scanning images you can scan images from the machine to a computer without printing them and save them in popular image types such as jpeg, tiff, bitmaps, or pdf. If you are scanning printed text, you can use the ocr (optical character recognition) software to convert it to text d...
Page 36
32 printing photographs directly from a compliant device printing photographs directly from a compliant device you can connect a pictbridge compliant device such as a digital camera, camcorder, or mobile phone using a usb cable recommended by the device’s manufacturer, and print recorded images dire...
Page 37
33 printing photographs directly from a compliant device 2 connect the pictbridge compliant device to the machine. (1) make sure that the pictbridge compliant device is turned off. (2) connect the pictbridge compliant device to the machine using a usb cable recommended by the manufacturer of the dev...
Page 38
34 printing photographs directly from a compliant device about pictbridge print settings settings on a pictbridge compliant device this section describes the print settings on a pictbridge compliant device. When operating the device, be sure to follow the instructions given in the instruction manual...
Page 39
35 printing photographs directly from a compliant device z layout setting various layout options are available. Z bordered/borderless: you can select whether or not to print an image with a border. Z n-up: you can use this option when printing on sticker paper, or a4- or letter-sized paper. Sticker ...
Page 40
36 printing photographs directly from a compliant device setting on the machine this section describes the pictbridge print settings on the machine. Set the print settings to default on the pictbridge compliant device when you want to print according to the settings on the machine. Z displaying the ...
Page 41
37 printing photographs directly from a compliant device * set the items in this column to default on the pictbridge compliant device when you want to make settings on the machine. Red eye correction corrects red eyes in portraits caused by flash photography. Image optimize vivid photo makes green a...
Page 42
38 routine maintenance routine maintenance when printing becomes faint or colors are incorrect when printing becomes faint or colors are incorrect, the print head nozzles on fine cartridges are probably clogged. Print the nozzle check pattern to confirm the condition of the nozzles and then perform ...
Page 43
39 routine maintenance printing the nozzle check pattern print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles. 1 make sure that the machine is turned on, then load a sheet of a4 or letter-sized plain paper in the rear tray. 2 open the paper output t...
Page 44
40 routine maintenance examining the nozzle check pattern examine the nozzle check pattern, and perform cleaning if necessary. 1 check the nozzle check pattern you printed. (1) check if lines in this pattern are missing. (a) good (b) lines are missing (2) check if there are white streaks in this pat...
Page 45
41 routine maintenance z if lines are missing or white streaks are present (1) select also b and press the ok button. The cleaning confirmation screen is displayed. (2) select yes and press the ok button to start print head cleaning. See “print head cleaning” on page 42..
Page 46
42 routine maintenance print head cleaning clean the print head if lines are missing or if white streaks appear in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Note that cleaning the print head causes used ink to be absorbed in the ink absorbe...
Page 47
43 routine maintenance print head deep cleaning if print quality does not improve by standard print head cleaning, try print head deep cleaning, which is a more powerful process. Note that cleaning the print head causes used ink to be absorbed in the ink absorber. Print head deep cleaning consumes m...
Page 48
44 routine maintenance aligning the print head if ruled lines are printed misaligned or print results are otherwise unsatisfactory, adjust the print head position. 1 make sure that the machine is turned on, then load two sheets of a4 or letter-sized plain paper in the rear tray. 2 open the paper out...
Page 49
45 routine maintenance 4 adjust the print head position. (1) check the printed patterns and use the [ or ] button to input the number of the pattern in column a that has the least noticeable streaks. (2) repeat the procedure until you finish inputting the pattern number for column l, then press the ...
Page 50
46 routine maintenance replacing a fine cartridge this section explains the way to confirm the ink status and the procedure to replace fine cartridges. When ink runs out or other errors occur, an error message is displayed on the lcd to inform you of the error. See “an error message is displayed on ...
Page 51
47 routine maintenance replacing fine cartridges when fine cartridges run out of ink, replace them using the following steps. Important handling fine cartridges z do not touch the electrical contacts or print head nozzles on a fine cartridge. The machine may not print out properly if you touch it. (...
Page 52
48 routine maintenance 1 open the paper output tray. 2 make sure that the machine is turned on, lift the scanning unit (printer cover), then pull the scanning unit support (a) down into place. The fine cartridge holder moves to the left. 3 remove the empty fine cartridge. (1) push down the fine cart...
Page 53
49 routine maintenance 4 prepare the replacement fine cartridge. (1) unpack a new fine cartridge and remove the orange protective tape (a) gently. 5 install the fine cartridge. (1) insert a new fine cartridge all the way into the appropriate slot. The black fine cartridge should be installed into th...
Page 54
50 routine maintenance 6 lift the scanning unit (printer cover) slightly to set the scanning unit support back to its original position, and then gently close the scanning unit (printer cover). Caution be sure to hold the scanning unit (printer cover) firmly, and be careful not to get your fingers c...
Page 55
51 routine maintenance keeping the best printing results to avoid drying of the print head and clogging of the nozzles, note the following. When you turn off the machine follow the procedure below to turn off the machine. (1) press the on/off button to turn off the machine. (2) confirm that the powe...
Page 56
52 routine maintenance cleaning your machine this section describes the cleaning procedure that is needed to maintain your machine. Cleaning the exterior of the machine be sure to use a soft cloth such as eyeglasses cleaning cloth and wipe off dirt on the surface with it gently. Smooth out wrinkles ...
Page 57
53 routine maintenance cleaning the paper feed roller (roller cleaning) clean the paper feed roller if paper is not fed properly. Cleaning the paper feed roller will wear the roller, so perform this only when necessary. 1 make sure that the machine is turned on, and then remove any paper from the re...
Page 58
54 routine maintenance cleaning the inside of the machine (bottom plate cleaning) this section describes how to clean the inside of the machine. If the inside of the machine becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly. 1 make sure that the machine is tur...
Page 59
55 routine maintenance cleaning the protrusions inside the machine if protrusions inside the machine are stained, wipe off any ink from the protrusions using a cotton swab or the like. Caution be sure to turn off the power and disconnect the power cord before cleaning the machine..
Page 60
56 troubleshooting troubleshooting this section describes troubleshooting tips for problems you may encounter when using the machine. Z “an error message is displayed on the lcd” on page 57 z “lcd cannot be seen at all” on page 58 z “an unintended language is displayed on the lcd” on page 58 z “cann...
Page 61
57 troubleshooting an error message is displayed on the lcd if an error message is displayed on the lcd, take the corresponding action described below. Message action the following ink cartridge cannot be recognized. U051/u052/u053/u059 the fine cartridge may not be installed properly, or the cartri...
Page 62
58 troubleshooting lcd cannot be seen at all an unintended language is displayed on the lcd the ink absorber is almost full. Press [ok] to continue printing. Contact the service center. The machine has a built-in ink absorber to hold the ink used during print head cleaning, for example. This error m...
Page 63
59 troubleshooting cannot install the mp drivers cause action unable to proceed beyond the printer connection screen. If you were unable to proceed beyond the printer connection screen, follow the procedure below to reinstall the mp drivers. (1)click cancel on the printer connection screen. (2)click...
Page 64
60 troubleshooting cannot connect to computer properly printing speed is slow / usb 2.0 hi-speed connection does not work “this device can perform faster” message is displayed cause action your system environment is not fully compatible with usb 2.0 hi-speed. If your system environment is not fully ...
Page 65
61 troubleshooting print results not satisfactory if the print result is not satisfactory such as white streaks, misaligned lines, and uneven colors, confirm the paper and print quality settings first. Z check 1: do the page size and media type settings match the size and type of the loaded paper? W...
Page 66
62 troubleshooting colors are unclear printing does not start/printing is blurred/colors are wrong/straight lines are misaligned cause action color correction is not enabled. When printing photographs or other graphics, enabling color correction may improve color. When performing direct printing, se...
Page 67
63 troubleshooting white streaks printed paper curls or has ink blots printed surface is scratched/paper is smudged inappropriate paper thickness lever setting. Adjust the position of the paper thickness lever according to the type of paper you are printing on. See “paper handling” on page 13. Depen...
Page 68
64 troubleshooting inappropriate paper thickness lever setting. Adjust the position of the paper thickness lever according to the type of paper you are printing on. See “paper handling” on page 13. Depending on the printing content, the printing surface may become scratched even for the types of pap...
Page 69
65 troubleshooting colors are uneven or streaked the print result not satisfactory when copying if these do not resolve the problem, also see “print results not satisfactory” on page 61. Printing does not start cause action print head nozzles are clogged. See “when printing becomes faint or colors a...
Page 70
66 troubleshooting paper does not feed properly the machine is not ready. Check if the power lamp is lit green. If the power lamp is off, turn the machine on. While the power lamp is flashing green, the machine is initializing. Wait until the power lamp stops flashing and remains lit green. Note whe...
Page 71
67 troubleshooting paper jams cause action paper jammed in the paper output slot or the rear tray. Remove the paper following the procedure below. (1)slowly pull the paper out, either from the rear tray or from the paper output slot, whichever is easier. Z if the paper tears and a piece remains insi...
Page 72
68 troubleshooting error message appears on the computer screen writing error/output error/communication error cause action the machine is not ready. Confirm that the power lamp is lit green. If the power lamp is off, turn the machine on. While the power lamp is flashing green, the machine is initia...
Page 73
69 troubleshooting error no.: 300 is displayed error no.: 1700/1710 is displayed error no.: 2001 is displayed cause action the machine is not ready. Confirm that the power lamp is lit green. If the power lamp is off, turn the machine on. While the power lamp is flashing green, the machine is initial...
Page 74
70 troubleshooting error no.: 2002 is displayed error message appears on a pictbridge compliant device the following are the possible errors that may occur when printing directly from a pictbridge compliant device and the countermeasures to clear them. Cause action pictbridge compliant device is con...
Page 75
71 troubleshooting cannot print properly via bluetooth communication printing does not start other printing troubles refer to the bluetooth guide on-screen manual. Cannot print properly from a photo index sheet cannot remove a memory card “no ink”/ “ink cassette error” z the fine cartridge has or ma...
Page 76
72 troubleshooting scanning problems scangear won’t start other scanning troubles refer to the scanning guide on-screen manual. The document cover comes off cause action the scanner driver (scangear) is not installed. Follow the procedure described in your setup sheet to reinstall the mp drivers. Ca...
Page 77
73 appendix appendix how to use the documentation provided printed documentation setup sheet be sure to read this sheet first. This sheet includes instructions for setting up your machine and getting it ready for use. Quick start guide (this guide) read this guide when starting to use the machine. A...
Page 78
74 appendix reading the on-screen manuals for detailed instructions on installing the on-screen manuals, refer to your setup sheet. You can view the on-screen manuals in the following way: to view the on-screen manual, double-click the xxx on-screen manual shortcut icon on the desktop, or click star...
Page 79
75 appendix specifications general specifications printing resolution (dpi) 4800 (horizontal)* x 1200 (vertical) * ink droplets can be placed with a pitch of 1/4800 inch at minimum. Interface usb 2.0 high speed* 1 bluetooth 1.2 (option) * 2 * 3 * 1 a computer that complies with usb 2.0 hi-speed stan...
Page 80
76 appendix z omnipage se: windows 2000 professional sp2 and sp3 not supported z mp navigator ex: quicktime v6.4 or later is needed (macintosh only) z some functions may not be available with windows media center camera direct print (pictbridge) paper size 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0...
Page 81
77 appendix z to upgrade from windows xp to windows vista, first uninstall software bundled with the canon inkjet printer. Specifications are subject to change without notice. Additional system requirements for on-screen manuals browser: windows html help viewer note: microsoft internet explorer 5.0...
Page 82
78 safety precautions safety precautions please read the safety warnings and cautions provided in this manual to ensure that you use the machine safely. Do not attempt to use the machine in any way not described in this manual. Warning you may cause an electric shock, fire, or damage the machine if ...
Page 83
79 safety precautions cleaning the machine use a damp cloth to clean the machine. Never use flammable solvents such as alcohol, benzene or thinners. If flammable solvents come in contact with electrical components inside the machine, it could cause a fire or electric shock. Always unplug the machine...
Page 84
80 safety precautions working around the machine never put your hands or fingers in the machine while it is printing. When moving the machine, carry the machine at both ends. Do not hold the rear side of the machine. Do not place any object on the machine. Do not place metal objects (paper clips, st...
Page 85
81 safety precautions legal limitations on use of your product and use of images it may be unlawful to make copies of, scan, print, or use reproductions of the following documents. The list provided is non-exhaustive. When in doubt, check with a legal representative in your jurisdiction. Z paper mon...
Page 86
82 safety precautions users in the u.S.A. Regulatory information fcc notice (u.S.A. Only) for 120v, 60hz model model number: k10308 this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) th...
Page 87
83 safety precautions this limited warranty shall only apply if the product is used in conjunction with compatible computers, peripheral equipment and software. Canon usa shall have no responsibility for such items except for compatible canon brand peripheral equipment covered by a separate warranty...
Page 88
84 safety precautions purchaser of the product or the person for whom it was purchased as a gift, and states your exclusive remedy. Canon usa offers a range of customer technical support* options: z interactive troubleshooting, e-mail technical support, the latest driver downloads and answers to fre...
Page 89
85 safety precautions canon u.S.A., inc. One canon plaza lake success, ny 11042 usa canon is a registered trademark of canon inc. ©2007 canon u.S.A., inc. Canon is a registered trademark of canon inc. In the united states and may also be a registered trademark in other countries..
Page 90
86 index index a appendix 73 b before using the machine 2 c canon u.S.A., inc. Limited warranty - usa only 82 cleaning exterior 52 inside 54 platen glass and document cover 52 protrusions inside the machine 55 roller 53 copying 20 e error message 57 h handling the original document 9 l legal limitat...
Page 91
Ordering information for additional supplies, use the following descriptions and order numbers. Description order # fine cartridges pg-30 black 1899b002 cl-31 color 1900b002 pg-40 black 0615b002 cl-41 color 0617b002 canon specialty papers all occasion photo cards (4" x 8"/ 50 sheets) 1029a069 glossy...
Page 92
Series quick start guide qt5-1007-v01 xxxxxxxx © canon inc. 2007 printed in vietnam the following fine cartridges are compatible with this product. For information on product specifications, please visit our website at www.Usa.Canon.Com photo all-in-one.