Chase Research IOPRINT+ Print Server User Manual - Printing - General
Page 11
Problem No. 5
I am using WPConfig on Windows 95, and having
problems configuring the IOPRINT+ Print Server.
Solution No. 5
WPConfig is designed for Windows 3.1 only. For Windows
95/NT, you should use BiAdmin.
Printing - General
Problem No. 1
When using 10BaseT cabling, the IOPRINT+ Print
Server unit does not work.
Solution No. 1
Check the Hub’s link LED for the port to which the
IOPRINT+ Print Server is connected. If it is off, there is a
problem in the network cable. If using 10BaseT or
100BaseT, check the LED next to the connector. It should
be on if the network connection is OK.
Problem No. 2
A printing device connected to the a IOPRINT+ Print
Server port cannot print or prints garbage.
Solution No. 2
Check the following:
•
Cable connection between IOPRINT+ Print Server and
printer.
•
Serial port configuration, if a serial device.
•
Printer driver in the application program or Windows
matches the printer.
Problem No. 3
The Configuration button on the Printer Status screen in
BiAdmin is grayed out, even though my printer in bi-
directional.
Solution No. 3
The button is unavailable if the printer is busy. You must
wait until the printer is idle.