Chattanooga Group Optiflex S User Manual - page 20
OPTIFLEX S USER MANUAL
20
TRANSPORTING THE OPTIFLEX
®
S
Numbers in parenthesis are for assistance with parts identification. References can be
found in the chapter entitled
Parts Description,
on page 22 of this manual.
1. Set motor A to 35° and motor B to 0°.
2. Switch the device off.
3. Remove the armrest (4) and the assembly (14) that contains the motors and
supports from the outer tube (12).
4. Pull out the connectors for the motors, pendent, and power supply cord. The
armrest and motion element are transported separately.
5. Set ante/retroversion to 0° (adjusting control 11).
6. Loosen the wing screw (10) and push the backrest fully forward. DO NOT
TIGHTEN THE SCREW. The OptiFlex S should always be shipped with the backrest
wing screw loose to avoid damage to the backrest.
7. Remove the two safety bolts and pins located on the underside of the seat. Pull
the chair’s legs out and reinsert them on the other side. Reinsert the safety bolts.
Before starting the OptiFlex S, make sure that it is at room temperature. If the unit is
exposed to temperatures below freezing during transport, the device MUST BE
ALLOWED TO STAND AT ROOM TEMPERATURE FOR ABOUT TWO HOURS in order
to avoid condensation. The OptiFlex S can only be operated in dry rooms.
MAINTENANCE
• Always unplug the device before cleaning.
• The OptiFlex S can be wiped clean with disinfectant and therefore complies with the
required hygienic standards for medical equipment.
• The housing and detachable arm supports can be cleaned using commonly available
disinfectants and mild household detergents.
• DO NOT SPRAY DISINFECTANT STRAIGHT ONTO OPTIFLEX
®
S. Wipe clean with a
damp cloth.
• Protect the device from excessive exposure to sunlight.
WARNING!
To avoid transport damage, always ship the OptiFlex
®
S in
its original packaging.
CAUTION!
Never allow liquids to get inside the housing or
programming unit.
CAUTION! - Changing Fuses
Pull out the Main plug before opening the fuse cover. Only
use fuses listed in the Technical Specifications section of
this manual.
CAUTION!
Repairs may only be carried out by authorized personnel.
Please call Chattanooga Group or your Chattanooga Group
Dealer for assistance.
OPTIFLEX S USER MANUAL