ChatterBox X1slim User Manual - page 6
ChatterBox USA Page 6 of 20
Fasten the mounting bracket snugly to the bottom left side of the helmet with two bolts supplied. Align the
back side of the X1slim unit to the grooves on the mounting bracket. Slide the X1 slim unit down on the
mounting bracket until it latches firmly into place.
Insert the 3.5mm plug of the headset into the Rider’s headset jack on the back of the main unit.
If you decide to use the handle bar mount PTT button, place the wired PTT button on the left side handle bar
grip (closest to where your thumb would be) of the motorcycle using the integrated Velcro strip. And insert
the 2.5mm plug into the PTT input in the back of the main unit.
ChatterBox USA Page 15 of 20
Change volume:
while listening to the radio, short press the UP or DOWN button to adjust the volume.
Search FM radio stations:
while listening to the radio, Long press the UP button to search forward and
long press the DOWN button to search backward. Please not that each time you search forward or
backward the radio will automatically stop at the next available station.
How to access and preset radio stations:
If you want to preset the station, simply short press the
Intercom button when on that station. You can preset up to 10 radio stations. To access the preset stations,
long press the MODE button. Each time you long press the MODE button it will go to the next preset
station.
7. Putting it all together
Typical setting:
The most typical setting for X1slim is listening to your music, hearing voice prompted
direction from your navigation system, and answering incoming calls while you communicate with your fellow
riders and/or passenger.
1
Turn
on
X1slim
2
Choose and set the channel and talk group. Test with PTT button or Voice activation
to see if everyone can hear each other.
3
Pair your Smartphone with Navigation app to the X1 slim.
4
Set the Bluetooth device mode by long pressing UP button
5
Access navigation system in your Smartphone and initiate the navigation by inputting
destination. Afterwards start your mp3 player
6
Now you should hear your music and hear the turn by turn direction from your
navigation system occasionally. You are also ready to answer your phone calls by
short pressing the MODE button. Lastly you can communicate with your fellow riders
who are on the same channel.
Priority:
Table shown below summarizes the priority among different devices. When you are in the
Bluetooth device mode, the navigation direction and phone calls get priority over the music. This means that
when a phone call is answered the music will be paused. As soon as the call ends, the music will play again.
Same thing applies with fellow rider communication. When you hear communication the music will pause.
After the communication is finished the music will automatically come back.
Priority
1 2 3 4
Bluetooth Cell
phone
Rider
communication
Navigation MP3
FM Radio
Cell phone
Rider
communication
FM Radio
Summary of button functions:
The table below will summarize the button functions that have been
explained in this manual