- DL manuals
- Chauvet
- Spotlight
- Intimidator Beam LED 350
- User Manual
Chauvet Intimidator Beam LED 350 User Manual
Summary of Intimidator Beam LED 350
Page 1
User manual.
Page 2: Able Of
Page 2 of 26 intimidator™ spot led 250 user manual (rev. 03) t able of c ontents 1. Before you begin .............................................................................. 3 what is included ............................................................................................... 3 unp...
Page 3: Efore
Intimidator™ spot led 250 user manual (rev. 03) page 3 of 26 1. B efore y ou b egin what is included 1 x intimidator™ spot led 250 1 x power cord 1 x warranty card 1 x quick reference guide unpacking instructions immediately upon receipt, carefully unpack the product and check the container to make ...
Page 4
Page 4 of 26 intimidator™ spot led 250 user manual (rev. 03) product at a glance use on dimmer auto programs outdoor use auto-ranging power supply sound activated replaceable fuse dmx user serviceable master/slave duty cycle safety notes please read the following safety notes carefully before workin...
Page 5: Ntroduction
Intimidator™ spot led 250 user manual (rev. 03) page 5 of 26 2. I ntroduction product overview cooling fan dmx in control panel and button menu power out power in dmx out fuse holder.
Page 6
Page 6 of 26 intimidator™ spot led 250 user manual (rev. 03) product dimensions.
Page 7: Etup
Intimidator™ spot led 250 user manual (rev. 03) page 7 of 26 3. S etup ac power the intimidator™ spot led 250 has an auto-ranging power supply and it can work with an input voltage range of 100~240 vac, 50/60 hz. To determine the product’s power requirements (circuit breaker, power outlet, and wirin...
Page 8
Page 8 of 26 intimidator™ spot led 250 user manual (rev. 03) power linking the product provides power linking via the iec outlet located in the back of the unit. Please see the diagram below for further explanation. Power linking diagram you can power link up to 6 intimidator™ spot led 250 units on ...
Page 9
Intimidator™ spot led 250 user manual (rev. 03) page 9 of 26 mounting before mounting the product, read and follow the safety recommendations indicated in the safety notes section (page 2 of this manual). Orientation the intimidator™ spot led 250 may be mounted in any position; however, make sure ad...
Page 10: Peration
Page 10 of 26 intimidator™ spot led 250 user manual (rev. 03) 4. O peration control panel operation to access the control panel functions, use the four buttons located underneath the display. Please refer to the product overview to see the button locations on the control panel. Button function press...
Page 11
Intimidator™ spot led 250 user manual (rev. 03) page 11 of 26 configuration (dmx) set the product in dmx mode to control with a dmx controller. 1. Connect the product to a suitable power outlet. 2. Turn the product on. 3. Connect a dmx cable from the dmx output of the dmx controller to the dmx input...
Page 12
Page 12 of 26 intimidator™ spot led 250 user manual (rev. 03) dmx channel assignments and values 13-ch channel function value setting 1 pan 000 255 0-540° 2 fine pan 000 255 fine control of panning 3 tilt 000 255 0-270° 4 fine tilt 000 255 fine control of tilting 5 speed 000 255 pan/tilt s...
Page 13
Intimidator™ spot led 250 user manual (rev. 03) page 13 of 26 continued from previous page 8 gobo rotation 000 063 indexing 064 147 rotation effect with increasing speed 148 231 reverse rotation effect with increasing speed 232 255 gobo bounce 9 prism 000 015 open 016 255 prism on 10 dim...
Page 14
Page 14 of 26 intimidator™ spot led 250 user manual (rev. 03) 8-ch channel function value setting 1 pan 000 255 0-540° 2 tilt 000 255 0-270° 3 color wheel 000 006 white 007 013 yellow 014 020 pink 021 027 green 028 034 red 035 041 light blue 042 048 kelly green 049 055 orange 056...
Page 15
Intimidator™ spot led 250 user manual (rev. 03) page 15 of 26 configuration (standalone) set the product in one of the standalone modes to control without a dmx controller. 1. Connect the product to a suitable power outlet. 2. Turn the product on. Never connect a product that is operating in any sta...
Page 16
Page 16 of 26 intimidator™ spot led 250 user manual (rev. 03) manual pan/tilt operation to select whether you want the intimidator™ spot led 250 to operate with normal panning or inverted panning, do the following: 1. Press repeatedly until pan shows on the display. 2. Press or to select normal pan ...
Page 17
Intimidator™ spot led 250 user manual (rev. 03) page 17 of 26 master/slave mode the master/slave mode allows a single intimidator™ spot led 250 unit (the “master”) to control the actions of one or more intimidator™ spot led 250 units (the “slaves”) without the need of a dmx controller. The master un...
Page 18
Page 18 of 26 intimidator™ spot led 250 user manual (rev. 03) miscellaneous operations reset software to reset the software on the intimidator™ spot led 250, do the following: 1. Press repeatedly until rest shows on the display. 2. Press . The product will reset all settings in the software to the d...
Page 19: Echnical
Intimidator™ spot led 250 user manual (rev. 03) page 19 of 26 5. T echnical i nformation product maintenance dust build up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life. To maintain optimum performance and minimize wear, you should ...
Page 20
Page 20 of 26 intimidator™ spot led 250 user manual (rev. 03) general troubleshooting symptom possible cause possible action circuit breaker or fuse keeps blowing excessive load on the circuit make sure that the total load does not exceed 80% of the breaker or fuse nominal current short circuit alon...
Page 21
Intimidator™ spot led 250 user manual (rev. 03) page 21 of 26 contact procedure in case you need to return a product or request support, follow the procedure below: if you live in the us, contact chauvet® world headquarters (see below). If you live in the uk or ireland, contact chauvet® europe ltd.(...
Page 22: Dmx Primer
Page 22 of 26 intimidator™ spot led 250 user manual (rev. 03) dmx primer introduction the dmx protocol (usitt dmx512-a) is a networking protocol that enables a universal dmx controller device to control the features of multiple dmx compatible fixtures, whether par cans, wash lights, moving heads, fo...
Page 23
Intimidator™ spot led 250 user manual (rev. 03) page 23 of 26 dmx configuration the dmx fixture configuration consists in determining how many channels each fixture will need as well as assigning the corresponding dmx channels to each fixture in order to size correctly the dmx controller. Personalit...
Page 24
Page 24 of 26 intimidator™ spot led 250 user manual (rev. 03) (dmx connectivity cont.) number of fixtures when using a dmx controller, the combined number of channels required by all the fixtures on the dmx daisy chain determines the number of fixtures the dmx controller has to support. Conversely, ...
Page 25
Intimidator™ spot led 250 user manual (rev. 03) page 25 of 26 (dmx connectivity cont.) test all dmx cables with an ohmmeter to verify their correct polarity and to make sure that there are no short-circuits between any of the pins, or between any pin and ground. If the common wire (shield) touches t...
Page 26: Echnical
Page 26 of 26 intimidator™ spot led 250 user manual (rev. 03) 6. T echnical s pecifications dimensions and weight length width height weight 9.3 in (236 mm) 8.1 in (205 mm) 11.3 in (287 mm) 12.6 lbs (5.7 kg) note: dimensions in inches rounded to the nearest decimal digit. Power power supply type ran...