1. DL manuals
  2. Chauvet
  3. Work Light
  4. LED Shadow
  5. User Manual

Chauvet LED Shadow User Manual

Other manuals for LED Shadow: Brochure & Specs, Pocket Manual

Summary of LED Shadow

  • Page 1

    0 user manual.

  • Page 2: Table Of Contents

    Led shadow™ user manual rev. 5 2 © chauvet®, 2014, all rights reserved information and specifications in this user manual are subject to change without notice. Chauvet® assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. Table of contents 1. Before y...

  • Page 3: 1. Before You Begin

    Led shadow™ user manual rev. 5 3 1. Before you begin unpacking instructions immediately upon receiving a product, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material...

  • Page 4

    Before you begin led shadow user manual rev. 5 4 important safety information this product is designed for professional use. It is not intended for use in a household environment. This product presents risks of lethal or severe injury due to fire and heat, electric shock, ultraviolet radiation, lamp...

  • Page 5: 2. Introduction

    Led shadow™ user manual rev. 5 5 2. Introduction features · 3-channel dmx-512 led uv blacklight · blackout/static/dimmer/strobe · built-in automatic programs · adjustable flash rate, dimmer and static via stand-alone · automatic built-in programs with sound-activation · linkable with led techno stro...

  • Page 6: Product Overview

    Introduction led shadow user manual rev. 5 6 dmx input dip-switches dmx addressing iec plug for ac input & fuse compartment dmx output led front panel hanging yoke audio sensitivity rotary knob red led: power indicator blue led: signal indicator power output flush mounting bracket bracket adjustment...

  • Page 7: 3. Setup

    Led shadow™ user manual rev. 5 7 hanging clamp flush mounting bracket 3. Setup ac power warning! Verify that the power requirement label on your unit matches the line voltage applied. All fixtures must be connected to circuits with a suitable earth ground. · to determine the power requirements for a...

  • Page 8: Fixture Linking

    Setup led shadow user manual rev. 5 8 fixture linking you will need a serial data link to run light shows of one or more fixtures using a dmx-512 controller or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the ...

  • Page 9

    Setup led shadow user manual rev. 5 9 this drawing provides a general illustration of the dmx input/output panel of a lighting fixture. Universal dmx controller continue the link often, the setup for master-slave and standalone operation requires that the first fixture in the chain be initialized fo...

  • Page 10: 4. Operating Instructions

    Led shadow™ user manual rev. 5 10 1 2 3 4 5 6 7 8 9 10 1 2 4 8 16 32 64 128 256 op ti o n sound auto on 4. Operating instructions the led shadow is a dmx-512 controllable, flash uv led panel made up of highly efficient and super bright uv leds. The led shadow can operate in stand-alone, master/slave...

  • Page 11: Dmx Control Mode

    Operating instructions led shadow user manual rev. 5 11 dmx control mode the led shadow can be operated from a dmx controller. This control mode environment gives the user the greatest flexibility when it comes to customizing or creating a show by enabling the control of each individual trait of the...

  • Page 12: 5. Appendix

    Led shadow™ user manual rev. 5 12 5. Appendix dmx primer there are 512 channels in a dmx-512 connection. Channels may be assigned in any manner. A fixture capable of receiving dmx-512 will require one or a number of sequential channels. The user must assign a starting address on the fixture that ind...

  • Page 13

    Appendix led shadow user manual rev. 5 13 unplug fixture from power. Use a vacuum or air compressor and a soft brush to remove dust collected on external vents and internal components. Clean all glass when the fixture is cold with a mild solution of glass cleaner or isopropyl alcohol and a soft lint...

  • Page 14

    Appendix led shadow user manual rev. 5 14 binary addressing quick reference chart dmx & binary address quick reference chart dip-switch position dmx dip-switch set #9 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0=off #8 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 1=on #7 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 x=off or on #6 0 1 0...

  • Page 15: Dmx Channel Values

    Appendix led shadow user manual rev. 5 15 dmx channel values note! Please read all instructions carefully on fixture dmx control mode and addressing. Dmx channels 2, and 3 functions are determined by the current settings of channel 1. For example, while channel 1 is set between 000 and 029 the follo...

  • Page 16: Eturns

    Appendix led shadow user manual rev. 5 16 r eturns to return a product or request support: · in the u.S., contact chauvet® world headquarters (see below). · in the uk or ireland, contact chauvet® europe ltd. (see below). · in mexico, contact chauvet® mexico (see below). · in any other country, do no...