Summary of Q-Wash 436Z-LED
Page 1
User manual.
Page 2: Edition Notes
Edition notes q-wash™ 436z-led user manual rev. 1 edition notes the q-wash™ 436z-led user manual rev. 1 covers the description, safety precautions, installation, programming, operation, and maintenance of the q-wash™ 436z-led. Chauvet® released this edition of the q-wash™ 436z-led user manual in mar...
Page 3: Table Of Contents
Table of contents q-wash™ 436z-led user manual rev. 1 -i- table of contents 1. Before you begin ...................................................................................................................................... 1 what is included .....................................................
Page 4
Table of contents -ii- q-wash™ 436z-led user manual rev. 1 password ................................................................................................................................................................................... 14 limit pan/tilt range ...............................
Page 5: 1. Before You Begin
Before you begin q-wash™ 436z-led user manual rev. 1 -1- 1. Before you begin what is included · q-wash™ 436z-led · power input cord · 2 omega brackets · safety cable · warranty card · quick reference guide claims carefully unpack the product immediately and check the box to make sure all the parts a...
Page 6
Before you begin -2- q-wash™ 436z-led user manual rev. 1 product at a glance use on dimmer x auto programs p outdoor use x auto-ranging power supply p sound-activated x replaceable fuse p dmx p user-serviceable x master/slave p duty cycle x safety notes read all the following safety notes before wor...
Page 7: 2. Introduction
Introduction q-wash™ 436z-led user manual rev. 1 -3- 2. Introduction product description the q-wash™ 436z-led is a high-power quad-color rgbw led, moving head wash product. This product consists of a base section and a moving yoke with a pan range of up to 540º. The moving head, which has a tilt ran...
Page 8
Introduction -4- q-wash™ 436z-led user manual rev. 1 product overview front view rear view side view bottom view control panel handles mounting points dmx in/out power fuse.
Page 9
Introduction q-wash™ 436z-led user manual rev. 1 -5- product dimensions.
Page 10: 3. Setup
Setup -6- q-wash™ 436z-led user manual rev. 1 3. Setup ac power each q-wash™ 436z-led has an auto-ranging power supply that works with an input voltage range of 100~240 vac, 50/60 hz. To determine the power requirements for each q-wash™ 436z-led, refer to the label affixed to the product. You can al...
Page 11
Setup q-wash™ 436z-led user manual rev. 1 -7- power linking the q-wash™ 436z-led supports power linking. You can power link up to 2 products at 120 vac, 5 products at 208 vac or 6 products at 230 vac this product comes with a power input cord. This product does not come with a power linking cable; h...
Page 12
Setup -8- q-wash™ 436z-led user manual rev. 1 mounting before mounting this product, read and follow the safety notes in this manual. Orientation always mount this product in a safe position and make sure there is adequate room for ventilation, configuration, and maintenance. Rigging chauvet® recomm...
Page 13: 4. Operation
Operation q-wash™ 436z-led user manual rev. 1 -9- 4. Operation control panel description button function exits from the current menu or function enables the currently displayed menu or sets the currently selected value in to the current function navigates upward through the menu list and increases t...
Page 14
Operation -10- q-wash™ 436z-led user manual rev. 1 loss of signal setting this setting controls how the product will respond when the dmx signal is lost. 1. Go to settings > perform > dmx error. A. Select save to make the product use the last command used when the signal is lost. B. Select black to ...
Page 15
Operation q-wash™ 436z-led user manual rev. 1 -11- edit custom programs this setting allows the programming of up to 49 steps in the custom running mode. 1. Go to stand alone > edit. 2. Select step. 3. Set the program step (01~49). A. Select pan or tilt. I. Set the position value (000~255). Ii. Repe...
Page 16
Operation -12- q-wash™ 436z-led user manual rev. 1 fixture cloning the q-wash™ 436z gives you 3 ways in which to transfer the settings from 1 q-wash™ 436z to other q-wash™ 436z products when hooked up via dmx daisy chain configuration. To transfer the custom program only: 1. Go to stand alone > send...
Page 17
Operation q-wash™ 436z-led user manual rev. 1 -13- dimmer curves this setting determines how fast the output of the q-wash™ 436z-led changes when you modify the values of the red, green, blue, white, and dimmer faders. This setting provides four different options to simulate the dimming curve of an ...
Page 18
Operation -14- q-wash™ 436z-led user manual rev. 1 control panel lock the q-wash™ 436z gives you 3 different security levels, which lock out unauthorized personnel from making changes to the product. To secure the settings level only: 1. Go to service > access > settings lock. A. Select on to requir...
Page 19
Operation q-wash™ 436z-led user manual rev. 1 -15- white calibration this setting allows you to select and edit the temperature of the white colors used in channel 10 (macros) when in the person2 mode. 1. Select service > calib.C. A. Select 3200k. B. Select red, green, or blue. I. Set the position v...
Page 20
Operation -16- q-wash™ 436z-led user manual rev. 1 reset the q-wash™ 436z gives you 3 different levels to reset the product. To reset the pan and tilt motors only: 1. Go to manual > reset > pt.Reset. A. Select yes to reset or no to exit. To reset the zoom motor only: 2. Go to manual > reset > optic ...
Page 21
Operation q-wash™ 436z-led user manual rev. 1 -17- menu map main level programming levels description address 000~512 sets the dmx starting address person person1 10-channel mode person2 16-channel mode person3 29-channel mode person4 8-channel mode person5 29-channel mode settings wireless wdmx act...
Page 22
Operation -18- q-wash™ 436z-led user manual rev. 1 menu map (cont.) main level programming levels description settings (cont.) perform (cont.) dim invert norm defines the direction of the dimmer fader invert dmx error save continues with last command upon loss of dmx control black blacks out fixture...
Page 23
Operation q-wash™ 436z-led user manual rev. 1 -19- menu map (cont.) main level programming levels description stand alone run dmx 512 selects dmx running mode auto1 selects the first automatic program auto2 selects the second automatic program custom selects a user customizable program test starts t...
Page 24
Operation -20- q-wash™ 436z-led user manual rev. 1 menu map (cont.) main level programming levels description manual (cont.) manual pan 000~255 allows manual control of all settings from control panel tilt red green blue white dimmer strobe zoom control service calib.M pan 000~255 calibrates the sta...
Page 25
Operation q-wash™ 436z-led user manual rev. 1 -21- menu map (cont.) main level programming levels description service (cont.) calib.C (cont.) 5600k red 000~255 sets color temperature for white 5 green blue 5900k red sets color temperature for white 6 green blue 6500k red sets color temperature for w...
Page 26
Operation -22- q-wash™ 436z-led user manual rev. 1 dmx values person 1 channel function value percent/setting 1 pan 000 ó 255 0~100% 2 tilt 000 ó 255 0~100% 3 red 000 ó 255 0~100% 4 green 000 ó 255 0~100% 5 blue 000 ó 255 0~100% 6 white 000 ó 255 0~100% 7 dimmer 000 ó 255 0~100% 8 strobe 000 ó 009 0...
Page 27
Operation q-wash™ 436z-led user manual rev. 1 -23- dmx values (cont.) person 2 channel function value percent/setting 1 pan 000 ó 255 0~100% 2 pan fine 000 ó 255 0~100% 3 tilt 000 ó 255 0~100% 4 tilt fine 000 ó 255 0~100% 5 pan/tilt speed 000 ó 255 0~100% 6 red 000 ó 255 0~100% 7 green 000 ó 255 0~1...
Page 28
Operation -24- q-wash™ 436z-led user manual rev. 1 dmx values (cont.) person 2 (cont.) channel function value percent/setting 11 auto rings 000 ó 009 010 ó 019 020 ó 029 030 ó 039 040 ó 049 050 ó 059 060 ó 069 070 ó 079 080 ó 089 090 ó 099 100 ó 109 110 ó 119 120 ó 129 130 ó 139 140 ó 149 150 ó 159 ...
Page 29
Operation q-wash™ 436z-led user manual rev. 1 -25- dmx values (cont.) person 3 channel function value percent/setting 1 pan 000 ó 255 0~100% 2 pan fine 000 ó 255 0~100% 3 tilt 000 ó 255 0~100% 4 tilt fine 000 ó 255 0~100% 5 pan/tilt speed 000 ó 255 0~100% 6 red 1 000 ó 255 0~100% 7 green 1 000 ó 255...
Page 30
Operation -26- q-wash™ 436z-led user manual rev. 1 dmx values (cont.) person 3 (cont.) channel function value percent/setting 26 dimmer 000 ó 255 0~100% 27 strobe 000 ó 009 010 ó 255 no function 0~10 hz 28 zoom 000 ó 255 0~100% 29 control 000 ó 019 020 ó 039 040 ó 059 060 ó 079 080 ó 099 100 ó 119 1...
Page 31
Operation q-wash™ 436z-led user manual rev. 1 -27- dmx values (cont.) person 4 channel function value percent/setting 1 pan 000 ó 255 0~100% 2 tilt 000 ó 255 0~100% 3 hue 000 ó 255 0~100% 4 saturation 000 ó 255 0~100% 5 value 000 ó 255 0~100% 6 strobe 000 ó 009 010 ó 255 no function 0~10 hz 7 zoom 0...
Page 32
Operation -28- q-wash™ 436z-led user manual rev. 1 dmx values (cont.) person 5 channel function value percent/setting 1 pan 000 ó 255 0~100% 2 pan fine 000 ó 255 0~100% 3 tilt 000 ó 255 0~100% 4 tilt fine 000 ó 255 0~100% 5 pan/tilt speed 000 ó 255 0~100% 6 dimmer 000 ó 255 0~100% 7 strobe 000 ó 009...
Page 33
Operation q-wash™ 436z-led user manual rev. 1 -29- dmx values (cont.) person 5 (cont.) channel function value percent/setting 10 red 1 000 ó 255 0~100% 11 green 1 000 ó 255 0~100% 12 blue 1 000 ó 255 0~100% 13 white 1 000 ó 255 0~100% 14 red 2 000 ó 255 0~100% 15 green 2 000 ó 255 0~100% 16 blue 2 0...
Page 34: 5. Technical Information
Technical information -30- q-wash™ 436z-led user manual rev. 1 5. Technical information product maintenance to maintain optimum performance and minimize wear, you should clean this product frequently. Usage and environment are contributing factors in determining the cleaning frequency. As a rule, cl...
Page 35
Technical information q-wash™ 436z-led user manual rev. 1 -31- technical specifications dimensions and weight length width height weight 11.89 in (302 mm) 15.74 in (400 mm) 18.58 in (472 mm) 27.6 lbs (12.52 kg) note: dimensions in inches rounded to the nearest decimal digit. Power power supply type ...
Page 36
Contact us world headquarters chauvet® general information address: 5200 nw 108th avenue sunrise, fl 33351 voice: (954) 577-4455 fax: (954) 929-5560 toll free: (800) 762-1084 united kingdom and ireland chauvet® europe ltd. General information address: unit 1c brookhill road industrial estate pinxton...