- DL manuals
- Chauvet
- Lighting Equipment
- Q-WASH 560Z-LED
- User Manual
Chauvet Q-WASH 560Z-LED User Manual
Summary of Q-WASH 560Z-LED
Page 1
User manual.
Page 2: Edition Notes
Edition notes q-wash 560z-led user manual rev. 05 edition notes the q-wash 560z-led user manual rev. 05 covers the description, safety precautions, installation, programming, operation, and maintenance of the q-wash 560z-led. Chauvet® released this edition of the q-wash 560z-led user manual in augus...
Page 3: Table of Contents
Table of contents q-wash 560z-led user manual rev. 05 -i- table of contents 1. Before you begin ................................................................................................ 1 what is included............................................................................................
Page 4: Table of Contents
Table of contents -ii- q-wash 560z-led user manual rev. 05 menu map ......................................................................................................................... 15 extra menu ...................................................................................................
Page 5: Before You Begin
Before you begin q-wash 560z-led user manual rev. 05 -1- 1. Before you begin what is included one q-wash 560z-led one iec power cord with edison plug (us market) one safety cable two omega brackets warranty card quick reference guide unpacking instructions immediately upon receiving this...
Page 6: Before You Begin
Before you begin -2- q-wash 560z-led user manual rev. 05 safety notes it is important to read all these notes before starting to work with this product. The safety notes include important safety information about the installation, usage, and maintenance of this product. There are no user serviceable...
Page 7: Introduction
Introduction q-wash 560z-led user manual rev. 05 -3- 2. Introduction product description the q-wash 560z-led is an rgbwa led moving yoke, wash product. The q-wash 560z-led consists of a base section and a moving yoke with a pan range of up to 540º. The moving head, which has a tilt range of 270º, co...
Page 8: Introduction
Introduction -4- q-wash 560z-led user manual rev. 05 product overview power input iec socket power switch fuse holder 3‐pin dmx in 3‐pin dmx out 5‐pin dmx out 5‐pin dmx in control panel front back.
Page 9: Introduction
Introduction q-wash 560z-led user manual rev. 05 -5- product dimensions.
Page 10: Setup
Setup -6- q-wash 560z-led user manual rev. 05 3. Setup ac power the q-wash 560z-led has an auto-ranging power supply that can work with an input voltage range of 100~240 vac, 50/60 hz. Make sure that you are connecting this product to the proper voltage, as per the specifications in this guide or on...
Page 11: Setup
Setup q-wash 560z-led user manual rev. 05 -7- dmx linking you may link the q-wash 560z-led to a dmx controller using a standard dmx serial connection. If using other dmx compatible products with this product, you can control them individually with a single dmx controller. If you are not familiar wit...
Page 12: Setup
Setup -8- q-wash 560z-led user manual rev. 05 mounting before mounting this product, read and follow the safety recommendations indicated in the safety notes section (page 2 of this manual). Orientation always mount this product in a safe position with adequate room around it for ventilation, head m...
Page 13: Operation
Operation q-wash 560z-led user manual rev. 05 -9- 4. Operation control panel description button function exits from the current menu or function enables the currently displayed menu or sets the currently selected value in to the current function navigates upwards through the menu list and increases ...
Page 14: Operation
Operation -10- q-wash 560z-led user manual rev. 05 master/slave the master/slave mode allows a group of q-wash 560z-led products (the slaves) to simultaneously duplicate the output of another q-wash 560z-led (the master), whether auto/custom or static modes, without a dmx controller. 1. Set the mast...
Page 15: Operation
Operation q-wash 560z-led user manual rev. 05 -11- dimmer curve this setting determines how fast the output of the q-wash 560z-led changes when the operator modifies the values of the red, green, blue, white, amber, and dimmer faders. This setting gives the user four different options to simulate th...
Page 16: Operation
Operation -12- q-wash 560z-led user manual rev. 05 reset control it is possible to select how you can reset the product, whether with the dmx controller or only from the control panel. 1. Go to menu > special > reset. 2. Select dmx or system. Dmx: enables the dmx controller to reset the product (con...
Page 17: Operation
Operation q-wash 560z-led user manual rev. 05 -13- fan control this option defines how you can control the fan speed, whether with the dmx controller or only from the control panel. 1. Go to menu > special > fan. 2. Select dmx or system. Dmx: enables the dmx controller to control the fan speed (cont...
Page 18: Operation
Operation -14- q-wash 560z-led user manual rev. 05 system default to default all the product’s parameters to their default values, do the following: 1. Go to menu > extra. 2. Press (password) will show on the display. 3. Press (**** will show on the display). 4. Enter the password, as explained in k...
Page 19: Operation
Operation q-wash 560z-led user manual rev. 05 -15- menu map 1 st level 2 nd level 3 rd level description intro address 001~512 selects a starting dmx address reset no/yes resets the product’s custom settings fan high select the fan’s operation mode. Note: the fan will go to high mode if the product’...
Page 20: Operation
Operation -16- q-wash 560z-led user manual rev. 05 continued from previous page 1 st level 2 nd level 3 rd level description edit (cont.) dimmer 000~255 selects the dimmer value strobe 01~20 selects the strobe frequency and mode zoom 000~255 select the zoom position dimspeed selects the dimmer speed...
Page 21: Operation
Operation q-wash 560z-led user manual rev. 05 -17- dmx values basic channel function value percent/setting 1 pan 000 255 0~540º 2 tilt 000 255 0~270º 3 red 000 255 0~100% 4 green 000 255 0~100% 5 blue 000 255 0~100% 6 white 000 255 0~100% 7 amber 000 255 0~100% 8 power and color macro ...
Page 22: Operation
Operation -18- q-wash 560z-led user manual rev. 05 advanced channel function value percent/setting 1 pan 000 255 0~540º 2 pan fine 000 255 fine movement control 3 tilt 000 255 0~270º 4 tilt fine 000 255 fine movement control 5 pan/tilt speed 000 255 fast~slow 6 red 000 255 0~100% 7 green...
Page 23: Technical Information
Technical information q-wash 560z-led user manual rev. 05 -19- 5. Technical information product maintenance to maintain optimum performance and minimize wear, the user should clean this product frequently. Usage and environment are contributing factors in determining the cleaning frequency. As a rul...
Page 24: Technical Information
Technical information -20- q-wash 560z-led user manual rev. 05 troubleshooting guide symptom cause(s) action(s) product is on leds are off product defaulted configure product’s parameters faulty led board send unit for repair faulty led driver board faulty led control board faulty display board prod...
Page 25: Technical Information
Technical information q-wash 560z-led user manual rev. 05 -21- returns procedure the user must send the merchandise prepaid, in the original box, and with its original packing and accessories. Chauvet® will not issue call tags. Call chauvet® and request a return merchandise authorization (rma) numbe...
Page 26: Technical Information
Technical information -22- q-wash 560z-led user manual rev. 05 technical specifications dimensions and weight length width height weight 9.1 in (232 mm) 13.3 in (339 mm) 14.2 in (361 mm) 21.2lbs (9.62kg) note: dimensions in inches rounded to the nearest decimal digit. Electrical power supply type ra...
Page 27
Chauvet® 5200 nw 108th avenue sunrise, fl 33351 (usa) (800) 762-1084 – (954) 577-4455 fax (954) 741-5571 www.Chauvetlighting.Com q-wash 560z-led user manual rev. 05 august 2011.