Summary of Radius
Page 1
User manual.
Page 2: Able Of
Page 2 of 16 radius™ 2.0 user manual rev. 2 t able of c ontents 1. Before you begin................................................................................3 what is included ........................................................................................... 3 unpacking instructions ....
Page 3: Efore
Radius™ 2.0 user manual rev. 2 page 3 of 16 1. B efore y ou b egin what is included · 1 x radius™ 2.0 · 1 x power cord · 1 x warranty card · 1 x quick reference guide unpacking instructions immediately upon receipt, carefully unpack the product and check the container to make sure you have received ...
Page 4
Page 4 of 16 radius™ 2.0 user manual rev. 2 product at a glance use on dimmer x auto programs p outdoor use x auto-ranging power supply p sound-activated p replaceable fuse p dmx p user-serviceable x master/slave p safety notes please read the following safety notes carefully before working with the...
Page 5: Ntroduction
Radius™ 2.0 user manual rev. 2 page 5 of 16 2. I ntroduction product overview fuse holder led display sound sensitivity knob back panel.
Page 6
Page 6 of 16 radius™ 2.0 user manual rev. 2 product dimensions.
Page 7: Etup
Radius™ 2.0 user manual rev. 2 page 7 of 16 3. S etup ac power the radius™ 2.0 has an auto-ranging power supply and it can work with an input voltage range of 100~240 vac, 50/60 hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value liste...
Page 8
Page 8 of 16 radius™ 2.0 user manual rev. 2 power linking the product provides power linking via the iec outlet located in the back of the unit. Please see the diagram below for further explanation. Power linking diagram you can power link up to twenty (20) radius™ 2.0 units on 120 vac or up to thir...
Page 9
Radius™ 2.0 user manual rev. 2 page 9 of 16 mounting before mounting the product, read and follow the safety recommendations indicated in the safety notes section. Orientation the radius™ 2.0 may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigg...
Page 10: Peration
Page 10 of 16 radius™ 2.0 user manual rev. 2 4. O peration control panel operation to access the control panel functions, use the four buttons located underneath the display. Please refer to the product overview to see the button locations on the control panel. Button function press to find an opera...
Page 11
Radius™ 2.0 user manual rev. 2 page 11 of 16 configuration (dmx) set the product in dmx mode to control with a dmx controller. 1. Connect the product to a suitable power outlet. 2. Turn the product on. 3. Connect a dmx cable from the dmx output of the dmx controller to the dmx input socket on the pr...
Page 12
Page 12 of 16 radius™ 2.0 user manual rev. 2 configuration (standalone) set the product in one of the standalone modes to control without a dmx controller. 1. Connect the product to a suitable power outlet. 2. Turn the product on. Never connect a product that is operating in any standalone mode (aut...
Page 13: Echnical
Radius™ 2.0 user manual rev. 2 page 13 of 16 5. T echnical i nformation product maintenance dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life. To maintain optimum performance and minimize wear, you should clean your lighti...
Page 14
Page 14 of 16 radius™ 2.0 user manual rev. 2 general troubleshooting symptom possible cause possible action circuit breaker or fuse keeps blowing excessive load on the circuit make sure that the total load does not exceed 80% of the breaker or fuse nominal current short circuit along the power lines...
Page 15
Radius™ 2.0 user manual rev. 2 page 15 of 16 contact procedure in case you need to return a product or request support, follow the procedure below: · if you live in the u.S., contact chauvet® world headquarters (see below). · if you live in the uk or ireland, contact chauvet® europe ltd.(see below)....
Page 16: Echnical
Page 16 of 16 radius™ 2.0 user manual rev. 2 6. T echnical s pecifications dimensions and weight length width height weight 10.5 in (268 mm) 13 in (330 mm) 9.6 in (243 mm) 6.3 lbs (2.8 kg) note: dimensions in inches rounded to the nearest decimal digit. Power power supply type range voltage selectio...