World-wide headquarters: 3000 north 29th ct., hollywood, florida, usa, fl 33020 tel: +1-954-929-1115 fax: +1-954-929-5560 www.Chauvetlighting.Com ssttaaggee ddeessiiggnneerr tfx-24c user guide please read these instructions carefully before use.
Blind home tap sync full-on black out 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10 8 6 4 2 0 10...
Rear panel dc input audio dmx out remote midi 1=ground 2=data+ 3=data- 1=ground 2=data- 3=data+ thru out in 500 ma min line in dmx polarity select 1/4"stereo jack full on black out gnd 100mv 1vp-p + 2 1 3 1 2 3 4 5 6 7 8 page 2.
7. Exit edit mode 1) press record ,then press exit. 2) release record and exit. 8. Delete step 1) in edit mode ,press step to execute the program till the step to be deleted. 2) press delete . The step is deleted and the next step is executed. Operating instruction: recording: 1) press and hold reco...
7)move the 14th channel slider to max. Position. 8)move speed slider until 1.00 appear in display and speed led is lit. 9)press rec speed and flash 14, then release both keys, the 14th scene program is set to run 1 step per second. 10)move speed slider to show mode position. Press rec speed and the ...
Page 5 17.Midi out setting 1)press and hold record 2)press 2th flash key 3 times, then release record, when cho appears on display, you can select midi in channel from 1th flash to 16th flash. 3)after you press desired flash, the appropriate channel led is lit. 4)press record and exit to withdraw mi...
B: closed loop mode: midi out midi out midi in midi in receiver transmitter note: when sending file dump in open loop mode, you should set up receiving mode for the receiver, otherwise receiving is disable 7) when the power voltage is too low ,the display show lop, now you should check whether the p...
Replacing fuses i f the unit does not function when plugged in ie. Items plugged into unit do not operate, then it is likely that a fuse has blown. Unplug unit before attempting to replace fuses. In order to replace the fuse, unscrew the “fuseholder cover” to reveal the fuse. The unit has a label at...
